Nano-Design für Makroschichten

Nano design for macroscopic coatings – new application potentials by PVD coatings up to 100 μm thickness Non-homogeneous coatings still limit the application of thicker layers due to defect growth and irregular layer thickness distribution along the surface of complex shaped components. Therefore, the layer thickness is usually limited to about 10 μm. In order to limit the surface roughness by the growing layer, multilayer coating systems are deposited by highly ionized plasmas. This allows significantly smoother layers to be produced, which until now could only be produced by mechanical finishing. Furthermore, by combining selected material systems and targeted parameter selection, structures can be deposited during coating, especially on edges, which result in a reduction of the cutting edge radius. In future, edge geometries should therefore be able to be specifically adjusted through the coating process.     

Creep life assessment method for online monitoring of steam turbine rotors

The principal objective of work was to develop fast and accurate method for online creep life monitoring of steam turbine rotors. For this purpose, a characteristic strain model of creep was investigated and validated using test data of 2%CrMoV rotor steel. The model was then used to determine creep damage functions which are introduced to compute creep damage at a constant temperature based on the Robinson time fraction rule. Finite element (FE) creep calculations of a turbine rotor were performed using the same creep model to obtain reference damage results for validating the proposed method. Comparisons of the results obtained using both methods showed a very good accuracy of the online creep damage predictions.     

Effect of Cover Brine Type on the Quality of Meat from Herring Marinades

Effects of vinegar, oil, and sour cream brines on meat quality of 4 popular cold marinades from herring were investigated in the study. Cover brine type affected the composition and nutritive value of meat as well as the sensory and microbiological quality of marinated herring. Qualitative differences resulted from cover brine penetration into meat, and from diffusion of components from meat to vinegar brine. Compared to oil and sour cream, vinegar brine contributed to increased concentrations of salt and acetic acid, hardness, color brightness of marinades meat and to increased microbial contamination of meat. Furthermore, vinegar caused nitrogen losses to 15%, including valuable products of protein hydrolysis, enzymes, and total volatile bases. The rolling up of fillets reduced diffusion even by 50%. In turn, oil and sour cream were causing mainly a higher fat content and overall sensory evaluation of the marinades.     

Binding of 2-azaanthraquinone derivatives to DNA and their interference with the activity of DNA topoisomerases in vitro

We have investigated the binding ability to DNA of compounds belonging to the 2-azaanthraquinone-type structure and have examined the effect on the activity of DNA gyrase as well as on mammalian topoisomerases in vitro. Using different biophysical techniques it was found that one of these ligands, 9-((2-dimethylamino)ethyl)amino)-6-hydroxy-7-methoxy-5, 10-dihydroxybenzo[g]isoquinoline-5,10-dione (TPL-I), is an intercalating DNA binding agent, whereas the parent compound tolypocladin (TPL) and a derivative (TPL-II) showed almost no similar affinity to DNA. CD measurements demonstrated a significant and selective binding tendency of TPL-I to alternating purine/pyrimidine sequences with some preference for poly(dA-dT). poly(dA-dT). Tm values were increased of the ligand complex with the alternating AT-containing duplex polymer. The binding to various DNAs was characterized by CD and visible absorption spectral changes. From the latter, different binding constants of 6.2 x 10(5) and 1.5 x 10(5) M-1 were obtained for poly(dA-dT).poly(dA-dT) and poly(dA). poly(dT), respectively. Sedimentation measurements with supercoiled pBR322 plasmid DNA clearly indicated an intercalative binding mechanism associated with an unwinding angle of about 18 degrees. These results suggest that the intercalative binding of TPL-I is promoted by the 2-(dimethylamino)ethylamino group substituted on carbon 9 of the anthraquinone system. The cytotoxic compound TPL-I, but not TPL or TPL-II, effectively inhibited the DNA supercoiling reaction of DNA gyrase and the activity of mammalian topoisomerases I and II as measured by the relaxation assay. TPL-I affects the cleavage reaction of topoisomerases on a single site located in alternating purine-pyrimidine sequence regions. The inhibitory potency of TPL-I can be ascribed to a blocking of cleavage sites on the DNA substrate, which correlates with the sequence preference of the ligand.     

Effect of Antibiotic Amphotericin B Combinations with Selected 1,3,4-Thiadiazole Derivatives on RPTECs in an In Vitro Model

4-(5-methyl-1,3,4-thiadiazole-2-yl) benzene-1,3-diol (C1) and 4-[5-(naphthalen-1-ylmethyl)-1,3,4-thiadiazol-2-yl] benzene1,3-diol (NTBD) are representative derivatives of the thiadiazole group, with a high antimycotic potential and minimal toxicity against normal human fibroblast cells. The present study has proved its ability to synergize with the antifungal activity of AmB. The aim of this work was to evaluate the cytotoxic effects of C1 or NTBD, alone or in combination with AmB, on human renal proximal tubule epithelial cells (RPTECs) in vitro. Cell viability was assessed with the MTT assay. Flow cytometry and spectrofluorimetric techniques were used to assess the type of cell death and production of reactive oxygen species (ROS), respectively. The ELISA assay was performed to measure the caspase-2, -3, and -9 activity. ATR-FTIR spectroscopy was used to evaluate biomolecular changes in RPTECs induced by the tested formulas. The combinations of C1/NTBD and AmB did not exert a strong inhibitory effect on the viability/growth of kidney cells, as evidenced by the negligible changes in the apoptotic/necrotic rate and caspase activity, compared to the control cells. Both NTBD and C1 displayed stronger anti-oxidant activity when combined with AmB. The relatively low nephrotoxicity of the thiadiazole derivative combinations and the protective activity against AmB-induced oxidative stress may indicate their potential use in the therapy of fungal infections.     

Comparative Analysis of Energetic Properties of Ti6Al4V Titanium and EN-AW-2017A(PA6) Aluminum Alloy Surface Layers for an Adhesive Bonding Application

The purpose of this article is to present energetic properties of surface Ti6Al4V titanium as well as surface EN-AW-2017A(PA6) aluminum alloy layers. Values of surface free energy after selected mechanical operations and ozonation were compared. In addition, the influence of different values of ozone concentration on surface layer energetic activation was analyzed. Dispersive and polar components of surface free energy were of particular concern. Comparative evaluation of shearing strength of Ti6Al4V titanium and EN-AW-2017A(PA6) aluminum alloy single-lap adhesive bonded joints were presented. Results can be used as pro-ecological methods of titanium and aluminum alloys preparing for applications where adhesive phenomenon is important.     

A Photoexcited Porphyrin System as a Biomimetic Catalyst for D-limonene Biotransformation

A photoexcited porphyrin system has been found to be an efficient catalyst for D-limonene biotransformation. The catalyst showed high selectivity in hydroxylation of D-limonene. The best catalyst for limonene biotransformation was 5,10,15,20-Tetraphenylporphyrin (H₂TPP), which gave the highest accumulation of carvone and an unknown product with a verbenone-like mass spectrum. The highest conversion yield of these products was favoured at 1:2 molar ratio of H₂TPP to limonene. Some factors affecting the biotransformation yield were also investigated. Maximal yield of carvone was obtained in the medium containing 90% of the substrate, within the period of 18–36 h. Mechanism involved in limonene biotransformation catalysed by H₂TPP is also discussed.     

Simulation of pH-controlled dissolution of aluminium based on a modified Scanning Electrochemical Microscope experiment to mimic localized trenching on aluminium alloys

Some constituent intermetallic (IMPs) particles at the surface of aluminium alloys are considered as preferential sites for the initiation of structural corrosion resulting in localized trenching around the particles and the surrounding Al matrix. In this work, a modified scanning electrochemical microscope (SECM) experiment was used to induce such phenomena via a local alcalinisation on 200 nm thick aluminium coatings promoting their local dissolution in an aerated 0.1 M NaCl electrolyte. The local alcalinisation was induced by the oxygen reduction reaction on the tip of a SECM which mimics the surface of an isolated IMP. From a phenomenological point of view, reproducible cylindrical damage develops in front of the platinum ultramicroelectrode (UME). Using a 2D finite element modelling to simulate the SECM experiments, the role of the local alcalinisation was validated and the calculated Al dissolution rate was found in agreement with the experimental evaluation.     

The effect of structural features on mechanical properties of loose optical fiber poly(butylene terephthalate) tubes

Results of a study on the modifying mechanical properties of loose optical‐fiber poly(butylene terephthalate) (PBT) tubes, produced during the standard industrial extrusion process, show that heat treatment make the structure of their material to change. The study comprised measurements of mechanical strengths properties of the tubes (tensile strength, compression strength, kinking) and determination of tube material structure [by differential thermal analysis (DTA), wide angle X‐ray scattering analysis (WAXD), and scanning electron microscopy (SEM)]. Results of the study allowed observation that the annealing at 70°C for 34 h of the tubes caused the crystalline α phase to increase in the tube material from ～28.5% to ～31.5% and the structure of the existing crystallites to become more perfect. This made the values of certain mechanical properties of the tubes to increase even by as much as 30%. The tubes following such thermal treatment could be used in cables exposed to heavy‐duty operation in arduous environments, where a larger margin from the standpoint of mechanical properties is required. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 2130–2134, 2002