Behavior of the polycyclic musks HHCB and AHTN in lakes, two potential anthropogenic markers for domestic wastewater in surface waters

The synthetic polycyclic musks HHCB and AHTN are potential chemical markers for domestic wastewater contamination of surface waters. Understanding their environmental behavior is important to evaluate their suitability as markers. This study focuses on the quantification of the processes that lead to an elimination in lakes. Rate constants for all relevant processes were estimated based on laboratory studies and models previously described. In lake Zurich, during winter time, both compounds are eliminated primarily by outflowing water and due to losses to the atmosphere. In summer, direct photolysis represents the predominant elimination process for AHTN in the epilimnion of lake Zurich (quantum yield, 0.12), whereas for HHCB, photochemical degradation is still negligible. HHCB and AHTN were then measured in effluents of Swiss wastewater treatment plants (WWTPs), in remote and anthropogenically influenced Swiss surface waters, and in Mediterranean seawater using an analytical procedure based on SPE and GC-MS-SIM with D6-HHCB as internal standard (LODs for natural waters, 2 and 1 ng/L, respectively). In winter, concentrations of HHCB and AHTN in lakes (<2-47 and <1-18 ng/L, respectively) correlated with the anthropogenic burden by domestic wastewater (ratio population per water throughflow), demonstrating the suitability of these compounds as quantitative, source-specific markers. In summer, however, no such correlations were observed. Vertical concentration profiles in lake Zurich indicated significant losses in the epilimnion during summer, mainly for AHTN, and could be rationalized with a lake modeling program (MASASlight), considering measured, average loads from WWTP effluents (0.80 +/- 0.22 and 0.32 +/- 0.11 mg person(-1) d(-1) for HHCB and AHTN, respectively) and the estimated rate constants for elimination processes.     

Ohmic cooking of whole turkey meat – Effect of rapid ohmic heating on selected product parameters

Intact turkey meat was cooked using low temperature long time (LTLT) and high temperature short time (HTST) protocols in a combined ohmic/convection system and compared to conventional (CONV) steam cooking. Both ohmic protocols gave a significantly lighter (p < 0.05) and a more uniform colour vs. CONV, while no significant differences (p ? 0.05) were found in texture profile analysis attributes between LTLT and CONV though HTST showed significantly higher attributes (p < 0.05). Cook loss was significantly (p < 0.05) different between treatments (25.2%, 27.9% and 31.3% for LTLT, CONV and HTST). Sensory studies largely confirmed these observations. Cook values (p < 0.05) were lowest for LTLT (4.0) followed by HTST (5.4) and control (8.5). Lipid oxidation and sulphur-flavour-compound development (measured over 7 days) were higher for conventional than ohmic treatments. Overall, these results demonstrate considerable industrial potential for ohmic heating, yielding high quality products with an 8–15-fold reduction in cooking time.     

Detection of wheat adulteration of spelt flour and products by PCR

 To date, no general method to detect wheat [Triticum aestivum vulgare (Vill.) Mackey] adulteration of spelt [T. aestivum spelta (L.) Thell.] exists. Exploiting a published allelic difference in γ-gliadin gene GAG56D, we developed and evaluated three PCR-based methods to determine the proportion of wheat in spelt flour and products. A sensitive wheat-specific PCR system was designed. Moreover, a heterologous internal standard was constructed for quantitative competitive (QC-)PCR. The standard was arbitrarily calibrated to 5% wheat DNA in spelt DNA. A PCR-RFLP system consisting of a GAG56D-specific PCR system with subsequent restriction was used to estimate the relative proportions of wheat and spelt in DNA mixtures. The three methods were successfully applied to seven commercial spelt samples and one self-produced bread. Five and three of the seven samples were found to contain more than 5% and 10% wheat, respectively. One sample appeared to contain no spelt at all. Analyzing the bread crumb with PCR-RFLP, we were able to estimate the wheat content of the flour which was used to produce the bread and thus demonstrated the applicability of PCR-RFLP to quantify processed products. Received: 24 March 2000     

Azole fungicides: occurrence and fate in wastewater and surface waters

The mode of action of azole compounds implies a potential to affect endocrine systems of different organisms and is reason for environmental concern. The occurrence and fate of nine agricultural azole fungicides, some of them also used as biocides, and four azole pharmaceuticals were studied in wastewater treatment plants (WWTPs) and lakes in Switzerland. Two pharmaceuticals (fluconazole, clotrimazole, 10-110 ng L(-1)) and two biocides (propiconazole, tebuconazole, 1-30 ng L(-1)) were consistently observed in WWTP influents. Loads determined in untreated and treated wastewater indicated thatfluconazole, propiconazole, and tebuconazole were largely unaffected by wastewater treatment, but clotrimazole was effectively eliminated (> 80%). Incubation studies with activated sludge showed no degradation for fluconazole and clotrimazole within 24 h, but strong sorption of clotrimazole to activated sludge. Slow degradation and some sorption were observed for tebuconazole and propiconazole (degradation half-lives, 2-3 d). In lakes, fluconazole, propiconazole, and tebuconazole were detected at low nanogram-per-liter levels. Concentrations of the pharmaceutical fluconazole correlated with the expected contamination by domestic wastewater, but not those of the biocides. Per capita loads of propiconazole and tebuconazole in lakes suggested additional inputs; for example, from agricultural use or urban runoff rainwater.     

A New Access to Piperidino-cyclopiperidinecarboxamides – constrained analogues of a pharmaceutical used diaminic building block

6-Piperidino-3-azabicyclo[3.1.0]hexane-6-carboxamide diastereomers 1a and 2a represent conformationally rigid analogues of 3a which is a building block in some pharmaceutical compounds. A new access to these compounds 1a and 2a was found via the cleavage of bicyclic N,N-acetal 6 with hydrocyanic acid as the stereodetermining step. Reaction of derivatives 1a and 2a with bromodiphenyl-butyronitrile 14 gave cyclopiritramide isomers 1c and 2c , respectively. Qualitative preliminary investigations showed different affinities of 1c and 2c to the opiate-μ receptor. These results were discussed on the basis of an X-ray structural analysis of cyclopiritramide isomer 2c . 1-Benzylcyclopiperidine derivatives 1d and 2d were used as model systems for studying the conformation of cyclopiritramide isomer 1c and 2c , respectively.     

Immune Checkpoint Blockade in Advanced Cutaneous Squamous Cell Carcinoma: What Do We Currently Know in 2020?

Cutaneous squamous cell carcinoma (cSCC) is the second most common skin cancer that predominantly arises in chronically sun-damaged skin. Immunosuppression, genetic disorders such as xeroderma pigmentosum (XP), exposure to certain drugs and environmental noxae have been identified as major risk factors. Surgical removal of cSCC is the therapy of choice and mostly curative in early stages. However, a minority of patients develop locally advanced tumors or distant metastases that are still challenging to treat. Immune checkpoint blockade (ICB) targeting CTLA-4, PD-L1 and PD-1 has tremendously changed the field of oncological therapy and especially the treatment of skin cancers as tumors with a high mutational burden. In this review, we focus on the differences between cSCC and cutaneous melanoma (CM) and their implications on therapy, summarize the current evidence on ICB for the treatment of advanced cSCC and discuss the chances and pitfalls of this therapy option for this cancer entity. Furthermore, we focus on special subgroups of interest such as organ transplant recipients, patients with hematologic malignancies, XP and field cancerization.     

Biosynthetic Plasticity Enables Production of Fluorinated Aurachins

Enzyme promiscuity has important implications in the field of biocatalysis. In some cases, structural analogues of simple metabolic building blocks can be processed through entire pathways to give natural product derivatives that are not readily accessible by chemical means. In this study, we explored the plasticity of the aurachin biosynthesis pathway with regard to using fluoro- and chloroanthranilic acids, which are not abundant in the bacterial producers of these quinolone antibiotics. The incorporation rates of the tested precursor molecules disclosed a regiopreference for halogen substitution as well as steric limitations of enzymatic substrate tolerance. Three previously undescribed fluorinated aurachin derivatives were produced in preparative amounts by fermentation and structurally characterized. Furthermore, their antibacterial activities were evaluated in comparison to their natural congener aurachin D.