Corrosion and wear properties of multipurpose coatings deposited by ion-beam-assisted deposition

Electrochemical measurements and wear tests were performed on aluminium and aluminium alloy coatings containing magnesium for uniform and local pitting corrosion protection of low carbon steel substrates. Final hard chromium nitride and aluminium nitride layers were deposited at the surface of the protective films in order to lower friction and wear. The results show that wear and corrosion protection can be improved by use of bifunctional multilayers. The coatings for multipurpose application were generated by ion-beam-assisted deposition. The defined intrinsic film stress controlled by the ion-to-atom arrival ratio influences the corrosion properties. Increasing the ion-to-atom ratios usually improves the corrosion resistance.     

Effect of Inhomogeneities on the Apparent Location and Magnitude of a Cardiac Current Dipole Source

A mathematical model was used to investigate the effects of electrical inhomogeneities introduced by the intracavitary blood mass and the lungs on the apparent location and magnitude of a current dipole source representing local activity in the myocardium. Radial and tangential current source moments were considered, and lung conductivity was taken as a variable parameter. Both the blood mass and the lungs cause a current source to appear closer to the heart center than it actually is. The effect increases as the source moves away from the endocardial surface, and maximum displacement is estimated to be of the order of 1 cm. The net effect of the inhomogeneities is to increase the magnitude of the radial component of a source dipole while diminishing its tangential component. These effects depend on source location.     

Chemical modification of hemp,sisal, jute,and kapok fibers by alkalization

Plant fibers are rich in cellulose and they are a cheap, easily renewable source of fibers with the potential for polymer reinforcement. The presence of surface impurities and the large amount of hydroxyl groups make plant fibers less attractive for reinforcement of polymeric materials. Hemp, sisal, jute, and kapok fibers were subjected to alkalization by using sodium hydroxide. The thermal characteristics, crystallinity index, reactivity, and surface morphology of untreated and chemically modified fibers have been studied using differential scanning calorimetry (DSC), X‐ray diffraction (WAXRD), Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM), respectively. Following alkalization the DSC showed a rapid degradation of the cellulose between 0.8 and 8% NaOH, beyond which degradation was found to be marginal. There was a marginal drop in the crystallinity index of hemp fiber while sisal, jute, and kapok fibers showed a slight increase in crystallinity at caustic soda concentration of 0.8–30%. FTIR showed that kapok fiber was found to be the most reactive followed by jute, sisal, and then hemp fiber. SEM showed a relatively smooth surface for all the untreated fibers; however, after alkalization, all the fibers showed uneven surfaces. These results show that alkalization modifies plant fibers promoting the development of fiber–resin adhesion, which then will result in increased interfacial energy and, hence, improvement in the mechanical and thermal stability of the composites. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 2222–2234, 2002     

The nutritive value of refined rapeseed oils: A review

Recent findings on the nutritive value of rapeseed oil (RSO) with high erucic acid content have been compared to those of canbra oil (CO), an oil extracted from newly bred Canadian rapeseed with no erucic acid. Erucic acid in diets retards animal growth even if food consumption is not altered. Growth performances of CO are as good as olive or peanut oil. The unbalanced ratio of palmitic acid to monoethylenic acids of CO does not affect rat growth rate. Because of its glyceride structure and high content of erucic acid, RSO has a lower digestibility (81%) than CO (96%) in the rat. Unabsorbed erucic acid is not preferentially excreted as calcium soaps. Interesterification of RSO which converts 31.7% of the erucic chains to the 2 position improves digestibility of erucic acid. 2-Monoerucin is more efficiently absorbed than the free acid. In vivo metabolic conversion of erucic to oleic acid has been proved in the rat. β-oxidation of injected 14-¹⁴C labeled erucic acid proceeded at the same rate as oleic acid but the over-all yield of the reaction was lower. Fatty acid composition of tissues in animals fed RSO or CO is influenced on one hand by erucic and gadoleic (C_20∶1) acids of RSO, and on the other hand by the unbalanced ratio of palmitic-monoethylenic acids and the linolenic acid content of both oils. Nonnegligible amounts of erucic acid are deposited in the body fats of rats, chickens, turkeys, lambs and found in the milk of female rats fed RSO. Almost no erucic acid is incorporated in liver and testicles in the rat and it is not recovered in chicken egg yolk. The effect of RSO on rat reproduction has been re-examined. Dietary lipid and vitamin levels are of great importance in the results obtained. RSO induces myocarditis in several animal species. Similar lesions, although less frequent and severe, have been observed also with CO in the rat. Some authors have reported that erucic acid of RSO was responsible for the effect on heart muscle. Common fatty acid patterns to both RSO and CO have to be further investigated to explain the persisting effect of CO. One of 9 papers presented at the Symposium, “Cruciferous Oil-seeds,” ISF-AOCS World Congress, Chicago, September 1970.     

Tensile strength of polyurethane exposed to nitrogen dioxide

Polyurethane prepared from tetramethylene glycol and diisocyanate was exposed in the form of films to small pressures of NO₂ and to NO₂ plus air. Tensile strength was measured as a function of exposure time and temperature with an apparatus especially constructed for the purpose of measuring mechanical properties in different environmental “atmospheres.”     

The kinetics of the catalytic hydrogenolysis of ethane over Ni/SiO2

The rate of hydrogenolysis of ethane over a Ni/SiO₂ catalyst, studied over a large range of pressure and of temperature, is shown to be related to the degree of hydrogen coverage θ_H, by the equation: with K₀ nearly equal to the number of ethane molecules colliding with the Ni surface, E₀ = 14 ? 1 kcal/mole, Y = ?1 ? 2 and X = 15 ? 2. The rate-limiting step is believed to be the irreversible, dissociative adsorption of ethane on an ensemble of at least 12 adjacent Ni atoms, free from adsorbed hydrogen, resulting in the complete cracking of C₂H₆: C₂H₆ + 12Ni → 2

Irreversible adsorption of ethane is assumed to compete with the reversible adsorption of hydrogen. This mechanism, which is compared with those proposed earlier, is in good agreement with data on ethane adsorption studied by magnetic methods, and with a study of ethane hydrogenolysis over NiCu/SiO₂ catalysts.     

Characterisation of the neutral oil from a low-temperature coal tar

Tar resulting from fluidised-bed, low-temperature carbonisation of coal was treated to yield a neutral oil from which a series of six other samples was extracted. These were examined by proton magnetic resonance (p.m.r.) spectroscopy, low-ionising-voltage (11 eV) mass spectroscopy (m.s.), gel chromatography followed by fluorescent indicator analysis, and cryoscopy. Aliphatic fractions separated chromatographically were also examined by infra-red spectroscopy. Distributions of hydrogen between chemical types were found for the several fractions from 60 MHz p.m.r. spectra and presented in terms of average structural parameters. M.s. analysis indicated negligible cracking of paraffin components, and the average molecular weight of 197 agreed well with cryoscopic determinations. For the carbon ratio, f_a, between aromatic and total, agreement between m.s. and p.m.r. depends on the p.m.r. structural analysis scheme adopted. P.m.r. and m.s. structural analyses of the aromatics emphasise the predominance of di- and tri-nuclears, with about 40% of available sites substituted, and the importance of acenes in lowtemperature carbonisation material. Gas and gel chromatography showed urea-adductable paraffins to be largely straight-chain C₁₀-C₂₆, much as for tars from carbonisation at higher temperature.