Highly anisotropic, ultra-smooth patterning of GaN/SiC by low energy electron enhanced etching in DC plasma

Hetero-epitaxial films of GaN(OOOl), deposited on SiC(OOOl) by organometallic vapor phase epitaxy and masked by 200 nm of SiO₂, have been patterned by low energy electron enhanced etching (LE4) in hydrogen and chlorine dc plasmas at room temperature. Lines 2.0 μm wide showed highly anisotropic etching: straight side walls, no overcut, no trenching, and no “pedestal” at the base of the line. Root mean square (RMS) surface roughness of the films as grown was 8.5–10?; after LE4, RMS surface roughness of the etched surfaces was 2.5?.     

A switched-current sample-and-hold circuit

A switched-current sample-and-hold circuit is reported. The circuit was fabricated in a 0.8-μm BiCMOS process. Measurements indicate a sampling frequency of 57 MHz with 60 dB signal-to-noise-plus-distortion-ratio and suggest that operation at sampling frequencies beyond 80 MHz is feasible. Comparisons of this circuit with other switched-current sample-and-hold circuits are given to highlight the strengths and weaknesses of the circuit. The feasibility of the sample-and-hold circuit as an under-sampler intended for the Canadian CT2Plus personal communication system is also presented     

Solar cell efficiency tables (version 29)

Consolidated tables showing an extensive listing of the highest independently confirmed efficiencies for solar cells and modules are presented. Guidelines for inclusion of results into these tables are outlined and new entries since June 2006 are reviewed. Copyright © 2006 John Wiley & Sons, Ltd.     

Hydrogen-bonded diketopyrrolopyrrole (DPP) pigments as organic semiconductors

Diketopyrrolopyrroles (DPPs) have recently gained attention as building-blocks for organic semiconducting polymers and small molecules, however the semiconducting properties of their hydrogen-bonded (H-bonded) pigment forms have not been explored. Herein we report on the performance of three archetypical H-bonded DPP pigments, which show ambipolar carrier mobilities in the range 0.01–0.06 cm²/V s in organic field-effect transistors. Their semiconducting properties are correlated with crystal structure, where an H-bonded crystal lattice supports close and relatively cofacial π–π stacking. To better understand transport in these systems, density functional theory calculations were carried out, indicating theoretical maximum ambipolar mobility values of ∼0.3 cm²/V s. Based on these experimental and theoretical results, H-bonded DPPs represent a viable alternative to more established DPP-containing polymers and small molecules where H-bonding is blocked by N-alkylation.     

A step by step methodology to analyze the IGBT failure mechanisms under short circuit and turn-off inductive conditions using 2D physically based device simulation

A systematic methodology is developed in order to clarify the punch through trench insulated gate bipolar transistor (T-IGBT) failure mechanisms which can occur under extreme operating conditions such as short circuit and clamped inductive switching. By considering a 2D dimensional physically based device simulation, and by analyzing some T-IGBT physical parameters, it is possible to identify if the failure mechanism is due to a breakdown, a latchup or a thermal runaway phenomenon.     

Wireless video streaming with TCP and simultaneous MAC packet transmission (SMPT)

Video streaming is expected to account for a large portion of the traffic in future networks, including wireless networks. It is widely accepted that the user datagram protocol (UDP) is the preferred transport protocol for video streaming and that the transmission control protocol (TCP) is unsuitable for streaming. The widespread use of UDP, however, has a number of drawbacks, such as unfairness and possible congestion collapse, which are avoided by TCP. In this paper we investigate the use of TCP as the transport layer protocol for streaming video in a multi‐code CDMA cellular wireless system. Our approach is to stabilize the TCP throughput over the wireless links by employing a recently developed simultaneous MAC packet transmission (SMPT) approach at the link layer. We study the capacity, i.e. the number of customers per cell, and the quality of service for streaming video in the uplink direction. Our extensive simulations indicate that streaming over TCP in conjunction with SMPT gives good performance for video encoded in a closed loop, i.e. with rate control. We have also found that TCP is unsuitable (even in conjunction with SMPT) for streaming the more variable open‐loop encoded video. Copyright © 2004 John Wiley & Sons, Ltd.     

Dependence of gate oxide breakdown on initial charge trapping under Fowler-Nordheim injection

This work demonstrates that for constant oxide reliability stresses in the Fowler-Nordheim regime a low initial rate of charge trapping/detrapping results in long times to breakdown. It was found for MOS gate oxides that when the initial trapping has been completed at low fields times to breakdown enhance. Depending on the stress sequence measurement results can vary significantly which is of great relevance for correct oxide lifetime predictions.     

Marginal costs and co-benefits of energy efficiency investments: The case of the Swiss residential sector

Key elements of present investment decision-making regarding energy efficiency of new buildings and the refurbishment of existing buildings are the marginal costs of energy efficiency measures and incomplete knowledge of investors and architects about pricing, co-benefits and new technologies. This paper reports on a recently completed empirical study for the Swiss residential sector. It empirically quantifies the marginal costs of energy efficiency investments (i.e. additional insulation, improved window systems, ventilation and heating systems and architectural concepts). For the private sector, first results on the economic valuation of co-benefits such as improved comfort of living, improved indoor air quality, better protection against external noise, etc. may amount to the same order of magnitude as the energy-related benefits are given. The cost–benefit analysis includes newly developed technologies that show large variations in prices due to pioneer market pricing, add-on of learning costs and risk components of the installers. Based on new empirical data on the present cost-situation and past techno-economic progress, the potential of future cost reduction was estimated applying the experience curve concept. The paper shows, for the first time, co-benefits and cost dynamics of energy efficiency investments, of which decision makers in the real estate sector, politics and administrations are scarcely aware.     

Technological learning in bioenergy systems

The main goal of this article is to determine whether cost reductions in different bioenergy systems can be quantified using the experience curve approach, and how specific issues (arising from the complexity of biomass energy systems) can be addressed. This is pursued by case studies on biofuelled combined heat and power (CHP) plants in Sweden, global development of fluidized bed boilers and Danish biogas plants. As secondary goal, the aim is to identify learning mechanisms behind technology development and cost reduction for the biomass energy systems investigated. The case studies reveal large difficulties to devise empirical experience curves for investment costs of biomass-fuelled power plants. To some extent, this is due to lack of (detailed) data. The main reason, however, are varying plant costs due to differences in scale, fuel type, plant layout, region etc. For fluidized bed boiler plants built on a global level, progress ratios (PRs) for the price of entire plants lies approximately between 90–93% (which is typical for large plant-like technologies). The costs for the boiler section alone was found to decline much faster. The experience curve approach delivers better results, when the production costs of the final energy carrier are analyzed. Electricity from biofuelled CHP-plants yields PRs of 91–92%, i.e. an 8–9% reduction of electricity production costs with each cumulative doubling of electricity production. The experience curve for biogas production displays a PR of 85% from 1984 to the beginning of 1990, and then levels to approximately 100% until 2002. For technologies developed on a local level (e.g. biogas plants), learning-by-using and learning-by-interacting are important learning mechanism, while for CHP plants utilizing fluidized bed boilers, upscaling is probably one of the main mechanisms behind cost reductions.     

Miniaturized coplanar waveguide stop band filters based on multiple tuned split ring resonators

A novel compact stop band filter consisting of a 50 /spl Omega/ coplanar waveguide (CPW) with split ring resonators (SRRs) etched in the back side of the substrate is presented. By aligning SRRs with the slots, a high inductive coupling between line and rings is achieved, with the result of a sharp and narrow rejection band in the vicinity of the resonant frequency of the rings. In order to widen the stop band of the filter, several ring pairs tuned at equally spaced frequencies within the desired gap are cascaded. The frequency response measured in the fabricated prototype device exhibits pronounced slopes at either side of the stop band and near 0 dBs insertion loss outside that band. Since SRR dimensions are much smaller than signal wavelength, the proposed filters are extremely compact and can be used to reject frequency parasitics in CPW structures by simply patterning properly tuned SRRs in the back side metal. Additional advantages are easy fabrication and compatibility with MMIC or PCB technology.