Tissue Engineering and Regenerative Medicine in Pediatric Urology: Urethral and Urinary Bladder Reconstruction

In the case of pediatric urology there are several congenital conditions, such as hypospadias and neurogenic bladder, which affect, respectively, the urethra and the urinary bladder. In fact, the gold standard consists of a urethroplasty procedure in the case of urethral malformations and enterocystoplasty in the case of urinary bladder disorders. However, both surgical procedures are associated with severe complications, such as fistulas, urethral strictures, and dehiscence of the repair or recurrence of chordee in the case of urethroplasty, and metabolic disturbances, stone formation, urine leakage, and chronic infections in the case of enterocystoplasty. With the aim of overcoming the issue related to the lack of sufficient and appropriate autologous tissue, increasing attention has been focused on tissue engineering. In this review, both the urethral and the urinary bladder reconstruction strategies were summarized, focusing on pediatric applications and evaluating all the biomaterials tested in both animal models and patients. Particular attention was paid to the capability for tissue regeneration in dependence on the eventual presence of seeded cell and growth factor combinations in several types of scaffolds. Moreover, the main critical features needed for urinary tissue engineering have been highlighted and specifically focused on for pediatric application.     

Mechanical response of novel SiOC glasses to high temperature exposition

The presented work describes mechanical properties of materials prepared by the pyrolysis of polysiloxane resins. The polymeric precursors have different chemical composition. Materials under investigation are predetermined for high temperature resistant applications usually in composite form, i.e. accompanied by some reinforcement. Instrumented hardness tests were employed for material characterisation. The Vickers hardness, Martens hardness and indentation elastic modulus were the key parameters, determined either from the standard optical technique or load–indentation depth curves. The influence of mechanical properties on the monomers ratio was established. The exposition to the temperature between 1200 °C and 1500 °C in air was applied to observe damage caused by these severe conditions.     

Evaluation of <Emphasis Type="Italic">flaA</Emphasis> Short Variable Region Sequencing,Multilocus Sequence Typing,and Fourier Transform Infrared Spectroscopy for Discrimination between <Emphasis Type="Italic">Campylobacter jejuni</Emphasis> Strains

Discriminatory and robust typing methods are needed to improve the understanding of the dynamics of food-borne Campylobacter infections and epidemiology in primary animal production. To evaluate the strain discriminatory potential of typing methods, flaA short variable region (SVR) sequencing and Fourier transform infrared (FTIR) spectroscopy were applied on a collection of 102 epidemiologically related and unrelated Campylobacter jejuni strains. Previous application of FTIR spectroscopy for subtyping of Campylobacter has been limited. A subset of isolates, initially discriminated by flaA SVR sequencing, were further subjected to multilocus sequence typing (MLST). It was found that flaA SVR sequencing had a slightly higher discriminatory power than FTIR spectroscopy, based on the Simpson diversity index. The clustering of strains indicated that FTIR spectroscopy is indeed a suitable method for discrimination of Campylobacter. The isolates were assigned to six clusters based on flaA SVR sequences and nine clusters based on the FTIR spectroscopy profiles. Furthermore, the cluster analysis of flaA SVR sequences, MLST, and FTIR spectroscopy profiles showed a high degree of congruence, assigning the isolates to similar cluster structures. In conclusion, FTIR spectroscopy can be applied for subtyping of Campylobacter, and the high discriminatory potential of both flaA SVR sequencing and FTIR spectroscopy render them suitable screening methods for large numbers of strains.     

Matter Timed

At best, the ageing of materials is regarded as lending a patina to historic buildings. In reality, however, materials often age disgracefully and unevenly, requiring a high level of maintenance and refurbishment. What if materials could be engineered and integrated into buildings not only to enhance but to heal? Martina Decker , Assistant Professor in the College of Architecture and Design at the New Jersey Institute of Technology (NJIT), looks at pioneering research that is being undertaken into performative, time-dependent materials.     

Lake extent changes in Basotu,Tanzania: a mixed-methods approach to understanding the impacts of anthropogenic influence and climate variability

Incompatible land use is a major contributor to ecosystem degradation, and is often exacerbated by climate change impacts. We investigate Lake Basotu, Tanzania as a case study where natural lake variability has been affected by agricultural land use. Comparisons between a satellite-derived history of lake surface area, local precipitation records, and corresponding anthropogenic activity show the impacts of agricultural and historical practices. We argue that insufficient consideration to the wider ecological impacts of large agricultural projects has lasting implications. This is particularly true in semi-arid environments where food production demands need to be continuously met. In the future, major conservation strategies should be investigated to maintain the environmental integrity and sustainability of freshwater resources.     

Preceramic polymer‐derived SiOC fibers by electrospinning

Silicon oxycarbide (SiOC) fibers with different chemical compositions were successfully fabricated by electrospinning a mixture of polyvinylpyrrolidone (PVP) and commercially available polymethylsilsesquioxane (MK) or polymethylphenylsilsesquioxane (H44) preceramic polymers, followed by cross‐linking and pyrolysis at 1000°C in Argon. The influence of the processing procedure (solvent selection, cross‐linking catalyst and additives) on the morphology of the produced fibers was investigated. For the MK/isopropanol system, the introduction of 20 vol% N,N‐dimethylformamide (DMF) enabled to decrease the diameter of the as‐spun fibers from 2.72 ± 0.12 μm to 1.65 ± 0.09 μm. For the H44/DMF systems, beads‐free fibers were obtained by adding 50 vol% choloroform. After pyrolysis, the resultant SiOC fibers derived from MK and H44 resins possessed uniform morphology, with an average diameter of 0.97 ± 0.07 μm and 1.07 ± 0.08 μm, respectively. Due to their different chemical compositions, the MK‐derived and H44‐derived SiOC ceramic fibers could find different potential applications. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39836.     

How Different Characterization Techniques Elucidate the Nature of the Gold Species in a Polycrystalline Au/TiO2 Catalyst

TiO₂‐supported gold species were prepared via the deposition‐precipitation route, with conservation of the initial speciation by freeze‐drying. The structural and electronic properties of the Au species were investigated by X‐ray absorption spectroscopy, electron microscopy, and IR spectroscopy of adsorbed CO in four states. Exclusively Au^III was deposited on the TiO₂ surface in patches ranging from isolated Au ions to three‐dimensional clusters. This paper illustrates in detail the unique contributions of all characterization techniques to this structural model.     

Functional mesoporous poly(ionic liquid)-based copolymer monoliths: From synthesis to catalysis and microporous carbon production

Ionic liquid-functionalized mesoporous polymeric networks with specific surface area up to 935 m²/g have been successfully synthesized one pot by solvothermal copolymerization of divinylbenzene and monomeric ionic liquids. The as-obtained polymers exhibit a monolithic structure featuring large pore volumes, an abundant mesoporosity and an adjustable content of ionic liquids. The effect of the reaction conditions on the pore structure has been studied in detail. These poly(ionic liquid)-based porous networks (PILPNs) have then been employed as precursors in two distinct applications, namely organocatalysis and production of microporous carbon monoliths. Selected organocatalyzed reactions, including carbonatation of propylene oxide by cycloaddition with carbon dioxide, benzoin condensation, and cyanosilylation of benzaldehyde have been readily triggered by PILPNs acting as crosslinked polymer-supported (pre)catalysts. The two latter reactions required the prior deprotonation of the imidazolium salt units with a strong base to successfully generate polymer-supported N-heterocyclic carbenes, referred to as poly(NHC)s. Facile recycling and reuse of polymer-supported (pre)catalysts was achieved by simple filtration owing to the heterogeneous reaction conditions. Furthermore, PILPNs could be easily converted into microporous carbon monoliths via CO₂ activation.