Theoretical and experimental investigations of a novel hot-film anemometer for high-pressure automotive applications

A micromachined hot-film anemometer on a high-pressure stable substrate is demonstrated to be suitable for "on-board" measurements of various injection quantities, which are needed in modern direct injection systems for optimum performance of diesel, as well as gasoline, engines. To estimate the velocity profile in the injection nozzle during the injection pulse, two-dimensional finite element method calculations are performed. To consider the substrate effect on the performance of the thermal injection rate sensor, an IR imaging system is used to determine the heat loss via the robust glass ceramic substrate up to thin-film temperatures of 450 K in air. Using both the numerical and the experimental results, the temperature sensitivity and velocity sensitivity of hot-film anemometers, operated in the constant current mode in a fuel atmosphere, can be modeled analytically. Finally, an overview about the results of the latest injection rate measurements at fuel pressures up to 60 MPa and drive pulse lengths between 0.2-5 ms is given. Comparing these signals of the thermal thin-film sensor to injection volume measurements, performed with an injection amount indicator at a high-pressure hydraulic test bench, the mass flow measurements can be calibrated. One empiric parameter is necessary, which is the exponent of a power law dependence on the maximum sensor amplitude during injection.     

Quantitative measurement of gas hold-up distribution in a stirred chemical reactor using X-ray cone-beam computed tomography

Cone-beam type X-ray computed tomography (CBCT) is a potential method to measure three-dimensional phase distributions in vessels. An example for that is the measurement of gas profiles in stirred chemical reactors. Such data are highly valuable for the assessment and evaluation of chemical processes, for optimisation of the reactor and stirrer design, and for evaluation of computational fluid dynamics codes used to model the fluid flow and heat transfer in reactive systems. However, there are considerable difficulties for accurate quantitative measurements due to beam hardening and radiation scattering effects. In a theoretical and experimental work we have investigated the non-linear effects of both physical phenomena and developed a suitable measurement setup as well as calibration and software correction methods to achieve a highly accurate measurement of void fraction profiles with CBCT.     

Possible methods of creating a functional neoglottis and of constructing a functionally adequate neolarynx

The intention of the following report is to present a concept for constructing a substitute glottis (neoglottis). The concept evolved over the years on the basis of anatomic studies and in the course of plastic reconstructions on patients. It is based on pedicled grafting of a voluntarily controllable--and hence trainable--musculature that might be transplanted into the larynx attached to a neurovascular pedicle. A rima glottidis might be imitated that could be opened and closed from a neutral position. During sleep the neoglottis would be in a relaxed, spasm-free position. A sensitive and tactile stimulus response ought to be possible, as should variations of the state of tension of the substitute vocal muscles.     

Novel approaches to the discovery of antimicrobial agents

OBJECTIVE: To examine the cost-effectiveness of prenatal carrier screening for cystic fibrosis. METHODS: A cost-benefit equation was developed that was based on the hypothesis that the cost of prenatal diagnosis required to diagnose and prevent one case of cystic fibrosis should be equal to or less than the lifetime cost generated from the birth of a neonate with cystic fibrosis. The formula was adjusted because a woman's positive or negative carrier status remains unchanged, thus eliminating the need for testing in subsequent pregnancies. The formula was manipulated to identify the optimal cost per screening test, as well as the net cost savings per prenatally diagnosed case of cystic fibrosis for various racial or ethnic groups. Sensitivity analyses included some key assumptions regarding the cost per screening test ($50-150), patient screening acceptance rates (25-100%), and therapeutic abortion rates (50-100%). RESULTS: Assuming therapeutic abortion rates of 50-100%, the net savings per prenatally diagnosed case of cystic fibrosis are $58,369-$382,369 among whites. Given the previously reported patient screening acceptance rates of 50-78%, the overall annual cost savings in the United States for whites are $161-251 million. However, the screening program was not found to be cost-effective for blacks, Asians, or Hispanics. CONCLUSION: Under most assumptions and sensitivity analyses, a prenatal cystic fibrosis-carrier screening program appears to be cost-effective.     

Treatment of Stress Urinary Incontinence with Muscle Stem Cells and Stem Cell Components: Chances,Challenges and Future Prospects

Urinary incontinence (UI) is a major problem in health care and more than 400 million people worldwide suffer from involuntary loss of urine. With an increase in the aging population, UI is likely to become even more prominent over the next decades and the economic burden is substantial. Among the different subtypes of UI, stress urinary incontinence (SUI) is the most prevalent and focus of this review. The main underlying causes for SUI are pregnancy and childbirth, accidents with direct trauma to the pelvis or medical treatments that affect the pelvic floor, such as surgery or irradiation. Conservative approaches for the treatment of SUI are pelvic physiotherapy, behavioral and lifestyle changes, and the use of pessaries. Current surgical treatment options include slings, colposuspensions, bulking agents and artificial urinary sphincters. These treatments have limitations with effectiveness and bear the risk of long-term side effects. Furthermore, surgical options do not treat the underlying pathophysiological causes of SUI. Thus, there is an urgent need for alternative treatments, which are effective, minimally invasive and have only a limited risk for adverse effects. Regenerative medicine is an emerging field, focusing on the repair, replacement or regeneration of human tissues and organs using precursor cells and their components. This article critically reviews recent advances in the therapeutic strategies for the management of SUI and outlines future possibilities and challenges.     

Extracellular Vesicles Tune the Immune System in Renal Disease: A Focus on Systemic Lupus Erythematosus,Antiphospholipid Syndrome,Thrombotic Microangiopathy and ANCA-Vasculitis

Extracellular vesicles (EV) are microparticles released in biological fluids by different cell types, both in physiological and pathological conditions. Owing to their ability to carry and transfer biomolecules, EV are mediators of cell-to-cell communication and are involved in the pathogenesis of several diseases. The ability of EV to modulate the immune system, the coagulation cascade, the angiogenetic process, and to drive endothelial dysfunction plays a crucial role in the pathophysiology of both autoimmune and renal diseases. Recent studies have demonstrated the involvement of EV in the control of renal homeostasis by acting as intercellular signaling molecules, mediators of inflammation and tissue regeneration. Moreover, circulating EV and urinary EV secreted by renal cells have been investigated as potential early biomarkers of renal injury. In the present review, we discuss the recent findings on the involvement of EV in autoimmunity and in renal intercellular communication. We focused on EV-mediated interaction between the immune system and the kidney in autoimmune diseases displaying common renal damage, such as antiphospholipid syndrome, systemic lupus erythematosus, thrombotic microangiopathy, and vasculitis. Although further studies are needed to extend our knowledge on EV in renal pathology, a deeper investigation of the impact of EV in kidney autoimmune diseases may also provide insight into renal biological processes. Furthermore, EV may represent promising biomarkers of renal diseases with potential future applications as diagnostic and therapeutic tools.     

Solvent and oxygen effects on the free radical polymerization of 6-O-vinyladipoyl-d-glucopyranose

The vinyl ester-type glycomonomer 6-O-vinyladipoyl-d-glucopyranose was polymerized in water and alcohol solutions. In all cases, long polymerization times were necessary to achieve reasonable conversions. Depending on the nature of the solvent, polydisperse glycopolymers were obtained possessing a molecular weight ranging between 10,000 and 122,000 Da (PS equivalent). Higher alcohols appeared to act as chain transfer agents and oligomers with DP_n between 2 and 6 were indeed obtained when 2-propanol was the solvent. Also, thorough oxygen removal from the reaction mixture proved to be essential for the success of the experiment, plain nitrogen sparging being ineffective in most cases.     

A unified method for optimal arbitrary pole placement

We consider the classic problem of pole placement by state feedback. We offer an eigenstructure assignment algorithm to obtain a novel parametric form for the pole-placing feedback matrix that can deliver any set of desired closed-loop eigenvalues, with any desired multiplicities. This parametric formula is then exploited to introduce an unconstrained nonlinear optimisation algorithm to obtain a feedback matrix that delivers the desired pole placement with optimal robustness and minimum gain. Lastly we compare the performance of our method against several others from the recent literature.