Optimizing the Runoff Estimation with HEC-HMS Model Using Spatial Evapotranspiration by the SEBS Model

Most of the commonly used hydrological models do not account for the actual evapotranspiration (ETa) as a key contributor to water loss in semi-arid/arid regions. In this study, the HEC-HMS (Hydrologic Engineering Center Hydrologic Modeling System) model was calibrated, modified, and its performance in simulating runoff resulting from short-duration rainfall events was evaluated. The model modifications included integrating spatially distributed ETa, calculated using the surface energy balance system (SEBS), into the model. Evaluating the model’s performance in simulating runoff showed that the default HEC-HMS model underestimated the runoff with root mean squared error (RMSE) of 0.14 m³/s (R²?=?0.92) while incorporating SEBS ETa into the model reduced RMSE to 0.01 m³/s (R²?=?0.99). The integration of HECHMS and SEBS resulted in smaller and more realistic latent heat flux estimates translated into a lower water loss rate and a higher magnitude of runoff simulated by the HECHMS model. The difference between runoff simulations using the default and modified model translated into an average of 95,000 m³ runoff per rainfall event (equal to seasonal water requirement of ten-hectare winter wheat) that could be planned and triggered for agricultural purposes, flood harvesting, and groundwater recharge in the region. The effect of ETa on the simulated runoff volume is expected to be more pronounced during high evaporative demand periods, longer rainfall events, and larger catchments. The outcome of this study signifies the importance of implementing accurate estimates of evapotranspiration into a hydrological model.

     

Condensation–cyclization reaction for one-pot synthesis of 1,3-thiazolidin-4-one derivatives by poly(p-phenylenediamine) grafted on LDHs as a catalyst with green tool

The three-component reaction between amine, carbonyl compound and thioglycolic acid is now considered as a major strategy for synthesis of 1,3-thiazolidin-4-ones, which consists of the following steps: (i) condensation of aldehyde and amine which results the formation of an imine; (ii) the reaction between thioglycolic acid and the imine which is followed by an intramolecular cyclization reaction, which leads to the formation of the final product. In this way, if no suitable catalyst is employed, the completion of the reaction will not be achieved. Hence, it is of great importance to select an appropriate catalyst so that these compounds can be successfully synthesized. Herein, we employed LDHs@PpPDA as a versatile catalyst for the fabrication of novel derivatives of 1,3-thiazolidin-4-one.     

Effects of Solvent Exchange Period and Heat Treatment on Physical and Chemical Properties of Rice Husk Derived Silica Aerogels

In this study, hydrophobic silica aerogels were synthesized from rice husk ash-derived sodium silicate through sol-gel processing, solvent exchange, surface modification and ambient pressure drying. By volume, 10% of trimethylchlorosilane (TMCS) in 90% of n-hexane was used as a hydrophobic solution in the surface modification process. The physical and chemical properties of silica aerogels were characterized by density and porosity measurements, scanning electron microscopy (SEM), Fourier transforms infrared (FTIR) spectroscopy, Brunauer–Emmett–Teller theory (BET) and dynamic scanning calorimetry (DSC). The hydrogels prepared were in the form of 2.5 ± 0.5 mm beads and then converted into alcogels through solvent exchange with ethanol for repetition of 3, 6 and 9 days. It is found that the optimal quality of silica aerogels with the BET surface area as high as 668.82 m²/g was obtained from the alcogels of the solvent exchange period of 9 days. Depending on the size of the gel’s block, a longer solvent exchange period will ensure adequate removal of pore water. Post heat treatment on silica aerogels obtained from the 9 days of solvent exchange at 200, 300 and 400 °C for 2 h results in slight decreased of aerogel’s density from 0.048 g/cm³ to 0.039 g/cm³ and the hydrophobicity of the aerogels is decreased above 380 °C as confirmed by DSC analysis.

     

An analytical framework for event mining in video data

With the high availability of digital video contents on the internet, users need more assistance to access digital videos. Various researches have been done about video summarization and semantic video analysis to help to satisfy these needs. These works are developing condensed versions of a full length video stream through the identification of the most important and pertinent content within the stream. Most of the existing works in these areas are mainly focused on event mining. Event mining from video streams improves the accessibility and reusability of large media collections, and it has been an active area of research with notable recent progress. Event mining includes a wide range of multimedia domains such as surveillance, meetings, broadcast, news, sports, documentary, and films, as well as personal and online media collections. Due to the variety and plenty of Event mining techniques, in this paper we suggest an analytical framework to classify event mining techniques and to evaluate them based on important functional measures. This framework could lead to empirical and technical comparison of event mining methods and development of more efficient structures at future.     

A new image encryption scheme with Feistel like structure using chaotic S-box and Rubik cube based P-box

Multimedia Tools and Applications - In this paper, a novel chaos-based dynamic encryption scheme with a permutation-substitution structure is presented. The S-boxes and P-boxes of the scheme are...     

Preparation and characterization of poly(vinyl alcohol)/gum tragacanth/cellulose nanocomposite film

The effects of gum tragacanth obtained from two species of Astragalus Gossypinus (GT-G) and A. Parrowianus (GT-P) at two levels of 10% and 30% combined with cellulose nanofibers (CNF; 5%) on the physico-mechanical and structural properties of polyvinyl alcohol (PVA) nanocomposite film were investigated in this study. The water solubility and water vapor permeability of the films decreased with increasing the content of both gums, especially in the film containing 30% GT-P. The highest values of the tensile strength (39.3 MPa) and elongation at break (445%) belonged to the treatment containing 10% GT-P (90/10P/0). The FTIR and DSC analyses confirmed good interactions between GT and PVA in the 90/10P/0 treatment. SEM images indicated the dense structure of this film as the optimum treatment. Although the presence of CNF in the films containing GT-G improved some properties, especially the Young modulus, it impaired all the functional properties of nanocomposite GT-P film.     

Networked Estimation of Multi‐Agent Systems Subject to Faults and Unreliable Information

In this paper, a novel framework for networked estimation of multi‐agent systems subject to presence of actuator faults is proposed. This framework is developed based on the notion of sub‐observers where within a group of sub‐observers each sub‐observer estimates certain states that are conditioned on a given input, output, and other state information. We model the overall estimation process by a weighted estimation (WE) digraph. By selecting an appropriate path in the WE digraph, an assigned supervisor can select and configure a set of sub‐observers to successfully estimate all the system states. In the presence of large intermittent disturbances, noise, and faults certain sub‐observers may become invalid, and consequently the supervisor reconfigures the set of sub‐observers by selecting a new path in the estimation digraph such that the impacts of these uncertainties are confined to only the local estimators. This will prevent the propagation of uncertainties on the estimation performance of the entire multi‐agent system. Simulation results provided for a five satellite formation flight system in deep space confirm the validity and applicability of our proposed analytical work.     

Modeling and robust discrete LQ repetitive control of electrically driven robots

Discrete linear quadratic control has been efciently applied to linear systems as an optimal control.However,a robotic system is highly nonlinear,heavily coupled and uncertain.To overcome the problem,the robotic system can be modeled as a linear discrete-time time-varying system in performing repetitive tasks.This modeling motivates us to develop an optimal repetitive control.The contribution of this paper is twofold.For the frst time,it presents discrete linear quadratic repetitive control for electrically driven robots using the mentioned model.The proposed control approach is based on the voltage control strategy.Second,uncertainty is efectively compensated by employing a robust time-delay controller.The uncertainty can include parametric uncertainty,unmodeled dynamics and external disturbances.To highlight its ability in overcoming the uncertainty,the dynamic equation of an articulated robot is introduced and used for the simulation,modeling and control purposes.Stability analysis verifes the proposed control approach and simulation results show its efectiveness.     

Optical Properties of Self‐Assembled Cellulose Nanocrystals Films Suspended at Planar–Symmetrical Interfaces

Hierarchically structured materials comprising rod‐like, chiral, nanoparticles are commonly encountered in nature as they can form assemblies with exceptional optical and mechanical characteristics. These include cellulose nanocrystals (CNCs), which have a large potential for the fabrication of bioinspired materials mimicking those advanced properties. Fine‐tuning the optomechanical properties of assemblies obtained from CNCs hinges on the transformations from suspensions of liquid crystals to long‐range order in the dry state. So far, associated transitions have been studied using trivial interfaces such as planar substrates. Such transitions are explored as they evolve onto meshed supports. The meshed substrate offers a complex topology, as is encountered in nature, for the formation of CNCs films. The CNCs self‐assembly occurs under confinement and support of the framework bounding the mesh openings. This leads to coexisting suspended and supported nanoparticle layers exhibiting nematic and/or chiral nematic order. Optical microscopy combined with crossed polarizers indicate that the formation of the suspended films occurs via intermediate gelation or kinetic arrest of CNCs across the mesh's open areas. The formation of self‐standing, ultrathin films of CNCs with tunable optical properties, such as selective reflections in the visible range (structural color), is demonstrated by using the presented simple and scalable approach.     

Copper/copper oxide nanoparticles synthesis using Stachys lavandulifolia and its antibacterial activity

Nanoparticles of copper/cuprous oxide (Cu/Cu₂ O) were successfully synthesised by a green chemistry route. The synthesis process was carried out using an extract of Stachys lavandulifolia as both reducing and capping agents with a facile procedure. The nanoparticles were characterised by different techniques including X‐ray diffraction, indicating that the synthesised sample comprised both copper and cuprous oxide entity. The nanoparticles had a mean size of 80 nm and represented an impressive bactericidal effect on Pseudomonas aeruginosa.Inspec keywords: copper, copper compounds, nanoparticles, nanofabrication, nanomedicine, antibacterial activity, X‐ray diffractionOther keywords: nanoparticles synthesis, Stachys lavandulifolia, antibacterial activity, green chemistry route, reducing agents, capping agents, X‐ray diffraction, bactericidal effect, Pseudomonas aeruginosa, Cu‐Cu₂ O