Increasing Angiogenesis Factors in Hypoxic Diabetic Wound Conditions by siRNA Delivery: Additive Effect of LbL-Gold Nanocarriers and Desloratadine-Induced Lysosomal Escape

Impaired wound healing in people with diabetes has multifactorial causes, with insufficient neovascularization being one of the most important. Hypoxia-inducible factor-1 (HIF-1) plays a central role in the hypoxia-induced response by activating angiogenesis factors. As its activity is under precise regulatory control of prolyl-hydroxylase domain 2 (PHD-2), downregulation of PHD-2 by small interfering RNA (siRNA) could stabilize HIF-1α and, therefore, upregulate the expression of pro-angiogenic factors as well. Intracellular delivery of siRNA can be achieved with nanocarriers that must fulfill several requirements, including high stability, low toxicity, and high transfection efficiency. Here, we designed and compared the performance of layer-by-layer self-assembled siRNA-loaded gold nanoparticles with two different outer layers—Chitosan (AuNP@CS) and Poly L-arginine (AuNP@PLA). Although both formulations have exactly the same core, we find that a PLA outer layer improves the endosomal escape of siRNA, and therefore, transfection efficiency, after endocytic uptake in NIH-3T3 cells. Furthermore, we found that endosomal escape of AuNP@PLA could be improved further when cells were additionally treated with desloratadine, thus outperforming commercial reagents such as Lipofectamine^® and jetPRIME^®. AuNP@PLA in combination with desloratadine was proven to induce PHD-2 silencing in fibroblasts, allowing upregulation of pro-angiogenic pathways. This finding in an in vitro context constitutes a first step towards improving diabetic wound healing with siRNA therapy.     

Investigation of the Binding Behavior between the S-heterocyclic Aromatic Palladium(II) Complex and Human Serum Albumin: Spectroscopic Approach

The interaction of 1, 10-phenanthroline octhyldithiocarbamato palladium(II) nitrate ([Pd(Oct-dtc)(phen)]NO₃) with human serum albumin (HSA) has been investigated by various spectroscopic techniques under physiological conditions. Here, HSA was titrated with the Pd(II) complex, followed by UV–Vis absorption spectroscopy to estimate a binding constant (K_b) and other thermodynamic parameters. The results indicate that the Pd (II) complex has a high affinity for bind HSA. Thermodynamic analysis showed that the enthalpy (ΔH°) and entropy changes (ΔS°) are positive and Gibbs free energy change (ΔG°) is negative which indicated that hydrophobic interactions played the predominant role in the binding process. Fluorescence spectroscopy were used to show the mechanism and binding parameters of this interaction. Utilizing the Stern–Volmer equation, the Pd(II) complex quenched the intrinsic fluorescence of HSA via a static quenching procedure. The specific binding distances between the tryptophan (donor) proteins and Pd(II) complex (acceptor) were estimated by Forster resonance energy transfer. The CD results also showed the conformational changes on serum albumin upon binding with the Pd(II) complex.     

Effect of seed layers on low-temperature,chemical bath deposited ZnO nanorods-based near UV-OLED performance

Low-temperature wet chemical bath deposition (CBD) method is one of the most efficient and least hazardous solution-based techniques which is widely employed to grow ZnO NRs. In CBD method, a seed layer is usually deposited on the substrate. In this paper, high quality ZnO and aluminum doped ZnO (AZO) seed layers are sputtered on the indium tin oxide (ITO) coated glass. In continue, aligned ZnO NRs are grown on the AZO and ZnO seed layers via CBD technique. The effect of the growth time and seed layer on the physical properties of as-grown ZnO NRs are investigated. According to the results, the seed layer plays an essential role on the growth orientation and growth rate of the ZnO NRs. The ZnO NRs grown on AZO seed layer are more aligned rather than ZnO seed layer due to their higher texture coefficients. The relative photoluminescence (PL) intensity ratio of near band emission (NBE) to deep level emission (DLE) (I_NBE/I_DLE) for the ZnO NRs grown on AZO and ZnO seed layers are calculated as 7.45 and 2.62, respectively. To investigate the performance of the as-grown ZnO NRs, near ultraviolet organic light-emitting diodes (UV-OLEDs) using ZnO NRs array as n-type material and poly [2-methoxy-5-(2-ethyl-hexyloxy)-1,4-phenylene-vinylene] (MEH-PPV) conjugated polymer as p-type material have been fabricated. The total concentration of traps ($N_t$), the characteristic energies ($E_t$) and the turn-on voltages for the devices with the structures of ITO/AZO/ZnO NRs/MEH-PPV/Al (device A) and ITO/ZnO/ZnO NRs/MEH-PPV/Al (device B) are attained 7.65 × 10¹⁶ and 7.75 × 10¹⁶ cm^?3, 0.232 and 0.206 eV, 23 and 21 V, respectively. Moreover, based on the electroluminescence (EL) spectra, the NBE peaks for device A and B are obtained nearly in the wavelengths of 382 and 388 nm, respectively. Finally, various charge carrier transportation processes of prepared UV-OLEDs have been studied, systematically.     

Online monitoring of the curing of adhesives with a miniaturised interdigital sensor using impedance spectroscopy

Monitoring adhesives during manufacturing and their lifetime has become increasingly important due to the variety of materials and applications. Impedance spectroscopy is a suitable method for online monitoring of the curing process. We present a miniaturised interdigital structure to monitor the curing process of the adhesives using impedance spectroscopy. Compared to other sensors, our sensor is ultrathin, so that it disappears in the adhesive joint. Therefore, it can remain in the joint and be used for lifetime monitoring. In addition it is suitable for thin adhesive layers due to its fine grid. We demonstrate that the impedance of the sensor embedded in the adhesive gives insight into the curing mechanisms. Therefore monitoring of a dispersion and an epoxy is shown. In addition, the curing cycles can be reliably controlled using this monitoring method. The permittivity of the adhesives is extracted from the impedance measurements, applying analytical models of the electrical field of the interdigital structure.     

Dielectric properties of multiwalled carbon nanotube/clay/polyvinylidene fluoride nanocomposites: Effect of clay incorporation

This study investigates the effect of clay addition on the broadband dielectric properties of multi‐walled carbon nanotube/polyvinylidene fluoride (MWCNT/PVDF) composites, that is, frequency range of 10¹−10⁶ Hz. Different loadings of MWCNT and clay were used for the preparation of three‐phase (MWCNT/Clay/PVDF) nanocomposites via melt‐mixing method. The crystalline structure and morphology of nanocomposites were examined by employing characterization techniques such as X‐ray diffraction, transmission electron microscopy, and differential scanning calorimetry. The dielectric spectroscopy showed that introducing clay into the MWCNT/PVDF nanocomposites at a critical MWCNT concentration improved dielectric properties tremendously. It was interestingly observed that the incorporation of a specific amount of clay, that is, 1.0 wt%, into the (MWCNT/PVDF) nanocomposite at a critical MWCNT loading, that is, 0.5 wt% MWCNT, resulted in a huge increase in the dielectric permittivity (670% at 100 Hz) and a considerable reduction in the dissipation factor (68% at 100 Hz). POLYM. COMPOS., 161–167, 2016. © 2014 Society of Plastics Engineers     

Novel composite nanofibers based on polyamide 66/graphene oxide- grafted aliphatic- aromatic polyamide: preparation and characterization

New polyamide 66/graphene oxide (GO)-grafted aliphatic-aromatic polyamide (polyamide-imide) (PAI) (PA66/GOF) composites nanofibers were successfully prepared via electrospinning method for the first time. An polyamide imide (PAI) was synthesized using polycondensation reaction from a dicarboxylic acid and a diamine based on 4,4′-(4,4′-isopropylidenediphenyl-1,1′-diyldioxy) dianiline, and characterized by ¹HNMR and FTIR. Morphological, structural, thermal and mechanical characteristics of the nanocomposite fibers were investigated by means of SEM, TEM, WAXD, DMTA and TGA techniques. Composites nanofibers of PA66/GO, PA66/PAI and PA66/GOF with smooth surface, uniform structure as well as with diameter ranging from 195 to 784 nm were obtained. The GO incorporation caused a reduction in the nanofibers diameters. The TEM images showed that the GO was well dispersed in the PA66 nanofibers without significant aggregation. An approximately 10 °C temperature increase in the glass transition temperature of PA66 was achieved by addition of 0.5 wt% of PAI, resulting from aliphatic-aromatic structure of PAI. By the TGA results, an increase about 40 °C was observed in the thermal stability of PA66/PAI composite nanofibers in comparison with that of pure PA66 nanofibers.     

Investigating the effect of paper properties on color reproduction of digital printing

Digital printing is affected by several parameters including printer and paper type which determine the final printed color gamut and the quality of reproduction. For investigation of those effects, tests were done on the three types of laser printer and six types of paper with different properties of whiteness, roughness, and gloss. The gamut volume was generated by Eye-One spectrophotometer, ProfileMaker, and ColorThink software. Properties of the different types of paper were measured by the atomic force microscopy, spectrophotometer and, goniophotometer. Results showed that the reproducibility was considerably dependent on the type of printer and type of paper. High whiteness and gloss increased the color gamut volume, while high roughness decreased the reproducibility of the printer. Tests on paper properties showed that whiteness had the most significant effect on color gamut volume.