The effect of temperature and pressure on the physicochemical properties of petroleum diesel oil and biodiesel fuel

Three commercial fuels were studied: biodiesel (based mainly of the fatty acids methyl esters of rapeseed oil), diesel oil Ekodiesel Ultra (standard petroleum diesel oil with sulphur content less than 10 mg/kg), and ON BIO 10 (blend of 20 vol.% of biodiesel with 80 vol.% of standard petroleum diesel oil with sulphur content less than 10 mg/kg). The speeds of sound were measured within the temperatures from 293 to 318 K and at pressures from 0.1 to 101 MPa. The densities and heat capacities were measured under atmospheric pressure in the temperature range from 273 to 363 K and 283 to 359 K, respectively. Using the experimental results, the physicochemical properties such as: density, isentropic bulk modulus, heat capacity, and isobaric thermal expansion were calculated in the same temperature and pressure range as the speed of sound was measured. The results obtained show that although the bulk modulus of ON BIO 10 is higher than that of diesel oil Ekodiesel Ultra over the whole pressure range, the difference is rather small and can be compensated by temperature. Isobaric thermal expansivity of biodiesel decreases with pressure slightly less than that of the diesel oil Ekodiesel Ultra. It is approximately independent of temperature and composition of the fuel at pressures 40 ± 5 MPa.     

Effect of hydrogen on the ethylene polymerization process over Ziegler–Natta catalysts supported on MgCl2(THF)2. I. Studies of the chain‐transfer reaction

The effect of hydrogen on the molecular weight of polyethylene obtained over vanadium catalysts (based on VCl₄ and VOCl₃) supported on MgCl₂(THF)₂ was studied and the results were compared to those obtained for similar titanium catalysts. It was confirmed that the dependencies of the transfer reaction on the hydrogen concentration are a half‐order in all investigated systems. However, the transition metal of the catalytic site affects the ratio of the transfer rate with hydrogen to the propagation rate (k_tr,H/k_p) and the results showed that hydrogen is a more effective agent of polyethylene molecular weight control in vanadium‐based systems as compared to the titanium catalyst. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 79: 356–360, 2001     

Global 5mC and 5hmC DNA Levels in Human Sperm Subpopulations with Differentially Protaminated Chromatin in Normo- and Oligoasthenozoospermic Males

Epigenetic modifications play a special role in the male infertility aetiology. Published data indicate the link between sperm quality and sperm chromatin protamination. This study aimed to determine the relationship between methylation (5mC) and hydroxymethylation (5hmC) in sperm DNA, with respect to sperm chromatin protamination in three subpopulations of fertile normozoospermic controls and infertile patients with oligo-/oligoasthenozoospermia. For the first time, a sequential staining protocol was applied, which allowed researchers to analyse 5mC/5hmC levels by immunofluorescence staining, with a previously determined chromatin protamination status (aniline blue staining), using the same spermatozoa. TUNEL assay determined the sperm DNA fragmentation level. The 5mC/5hmC levels were diversified with respect to chromatin protamination status in both studied groups of males, with the highest values observed in protaminated spermatozoa. The linkage between chromatin protamination and 5mC/5hmC levels in control males disappeared in patients with deteriorated semen parameters. A relationship between 5mC/5hmC and sperm motility/morphology was identified in the patient group. Measuring the 5mC/5hmC status of sperm DNA according to sperm chromatin integrity provides evidence of correct spermatogenesis, and its disruption may represent a prognostic marker for reproductive failure.     

Influence of Cr Ion Implantation on Physical Properties of CuO Thin Films

Cupric oxide is a semiconductor with applications in sensors, solar cells, and solar thermal absorbers. To improve its properties, the oxide was doped with a metallic element. No studies were previously performed on Cr-doping using the ion implantation technique. The research goal of these studies is to investigate how Cr ion implantation impacts the properties of the oxide thin films. CuO thin films were deposited using magnetron sputtering, and then chromium ions with different energies and doses were implanted. Structural, optical, and vibrational properties of the samples were studied using X-ray diffraction, X-ray reflectivity, infra-red spectroscopy, Raman spectroscopy, and spectrophotometry. The surface morphology and topography were studied with ellipsometry, atomic force microscopy, and scanning electron microscopy. A simulation of the range of ions in the materials was performed. Ion implantation had an impact on the properties of thin films that could be used to tailor the optical properties of the cupric oxide and possibly also its electrical properties. A study considering the influence of ion implantation on electrical properties is proposed as further research on ion-implanted CuO thin films.     

The Exposure Profiles,Correlation Factors and Comparison of PAHs and Nitro-PAHs in Urban and Non-Urban Regions in Suspended Particulate Matter in Poland

ABSTRACT

Polycyclic aromatic hydrocarbons (PAHs) and their nitrated derivatives are responsible for mutagenic activation of ambient air. The aim of the study was the assessment of exposure for PAHs and nitro-PAHs in the urbanized region in Poland in comparison with the non-urbanized region and assessment of seasonal variation of PAHs and nitro-PAHs. Concentrations of 12 PAHs, 8 nitrated PAHs in total suspended particulate matter in air of urban and suburban (reference samples-mountain region) region in Poland during four seasons have been shown. The method of solvent extraction of particulate matter, fractionation organic extract and HPLC and GC/MS analysis were applied. The concentrations of PAHs and nitro-PAHs were 10–100 times lower in reference samples than concentrations of PAHs and nitro-PAHs in urban region in summer. The concentrations of PAHs and nitro-PAHs were highest in winter. The exposure profiles of PAHs and nitro-PAHs in four seasons have been shown. The correlation factor between concentrations of PAHs and nitro-PAHs was found. Important influence of ambient air temperature for PAHs and nitro-PAHs concentrations was shown. Obtained results suggest that the coal combustion in Polish households was the main source of PAHs and their nitro derivatives contaminations. Emission from transport sources is a secondary source of air pollution in urban areas.     

Comparative Analysis of Bacterial Cellulose Membranes Synthesized by Chosen Komagataeibacter Strains and Their Application Potential

This article presents a comparative analysis of bacterial cellulose membranes synthesized by several strains of the Komagataeibacter genus in terms of their specific physical, physico-chemical, and mechanical properties. Herein, the aim was to choose the most suitable microorganisms producing cellulosic materials with the greatest potential for the fabrication of bio-inspired nanocomposites. The selection was based on three main steps, starting from the evaluation of BNC biosynthetic efficiency with and without the addition of ethanol, followed by the assessment of mechanical breaking strength, and the physical parameters (compactness, structural integrity, appearance, and thickness) of the obtained biological materials. Ultimately, based on the performed screening procedure, three efficiently growing strains (K. hansenii H3 (6Et), K. rhaeticus K4 (8Et), and Komagataeibacter sp. isolated from balsamic vinegar (12Et)) were chosen for further modifications, enabling additional cellulose functionalization. Here, supplementation of the growth medium with five representative polymeric compounds (citrus/apple pectin, wheat starch, polyvinyl alcohol, polyethylene glycol) led to significant changes in BNC properties, especially dye loading abilities, mechanical strength, and water adsorption/retention capacities. The resulting nanocomposites can be potentially useful in various fields of medicine and industry, and in the future, they may become a practical and cost-effective competitor against commercial biomaterials currently available on the market.     

Nature-Inspired Effects of Naturally Occurring Trace Element-Doped Hydroxyapatite Combined with Surface Interactions of Mineral-Apatite Single Crystals on Human Fibroblast Behavior

Innovative engineering design for biologically active hydroxyapatites requires enhancing both mechanical and physical properties, along with biocompatibility, by doping with appropriate chemical elements. Herein, the purpose of this investigation was to evaluate and elucidate the model of naturally occurring hydroxyapatite and the effects of doped trace elements on the function of normal human fibroblasts, representing the main cells of connective tissues. The substrates applied (geological apatites with hexagonal prismatic crystal habit originated from Slyudyanka, Lake Baikal, Russia (GAp) and from Imilchil, The Atlas Mountains, Morocco (YAp)) were prepared from mineral natural apatite with a chemical composition consistent with the building blocks of enamel and enriched with a significant F⁻ content. Materials in the form of powders, extracts and single-crystal plates have been investigated. Moreover, the effects on the function of fibroblasts cultured on the analyzed surfaces in the form of changes in metabolic activity, proliferation and cell morphology were evaluated. Apatite plates were also evaluated for cytotoxicity and immune cell activation capacity. The results suggest that a moderate amount of F⁻ has a positive effect on cell proliferation, whereas an inhibitory effect was attributed to the Cl⁻ concentration. It was found that for (100) GAp plate, fibroblast proliferation was significantly increased, whereas for (001) YAp plate, it was significantly reduced, with no cytotoxic effect and no immune response from macrophages exposed to these materials. The study of the interaction of fibroblasts with apatite crystal surfaces provides a characterization relevant to medical applications and may contribute to the design of biomaterials suitable for medical applications and the evaluation of their bioavailability.