Ternary solubility of mono- and di-tert-butyl ethers of glycerol in supercritical carbon dioxide

Using a continuous flow apparatus, the ternary solubility of mono- and di-tert-butyl ethers of glycerol (MTBG and DTBG, respectively) in supercritical carbon dioxide was measured at the temperatures of 313.15, 333.15, and 348.15 K; a pressure range of 80-200 bar; and an expanded gas flow rate of 180 ± 10 mL min⁻¹ at average laboratory temperature of 300.15 K and pressure of 0.89 bar. The ternary solubility of the ethers at the constant temperatures of 333.15 and 348.15 K increased with increasing pressure up to the crossover point (i.e., 152 bar for MTBG and 170 bar for DTBG). MTBG exhibited a higher solubility than DTBG in scCO₂. The experimental data for the ternary solubility of MTBG and DTBG were correlated using the Bartle equation.     

Physicochemical,rheological, and molecular characterization of colloidal gelatin produced from Common carp by‐products using microwave and ultrasound‐assisted extraction

The effects of ultrasound‐assisted extraction (UAE) and microwave‐assisted extraction (MAE) methods on molecular and physicochemical characteristics of the resultant gelatin were examined. Before extraction procedure, we investigated the optimum pH for swelling of Common carp by‐products, which is an important pretreatment for gelatin production. The highest swelling yield was achieved at pH 13 among pH 1–14 with unit intervals. Results indicated that the UAE gelatin has a higher gel strength, viscosity, melting point, and gelling point. The power and time of sonication showed a reverse relation with these characteristics. In addition, as the time of microwave heating was raised, the gel strength, viscosity, melting point, and gelling point were decreased. The FT‐IR spectra showed similar peaks but the Amide B in UAE gelatin slightly vanished. The electrophoretic pattern also revealed the higher gel strength and viscosity of UAE gelatin due to the higher intensity of α and β chains compared to MAE gelatin. It can be concluded from all of the results of this study that the produced gelatin using these procedures can be a good source of gelatin in food and drug industries.     

Sintering Behavior and Machinability of Phlogopite Glass Ceramics Containing Fe2O3

Mica-based glasses in the SiO₂-Al₂O₃-MgO-K₂O-F system were prepared by a sintering method to investigate the effects of different amounts of hematite (Fe₂O₃) on thermal and sintering behaviors besides machinability of the glasses by means of differential thermal analysis (DTA), X-ray diffraction, and scanning electron microscope techniques. DTA analysis on fine and coarse glass powders indicated that the main crystallization mechanism in this system occurred in the bulk rather than the surface. Increasing Fe₂O₃ content to 5 wt.% improved machinability of the glass ceramic. Fe₂O₃ led to the disruption of the glass matrix and facilitated the nucleation of the crystalline phase. Precipitation of sellite (MgF₂) crystals as heterogeneous nucleating sites for potassium phlogopite crystals acted as a second contribution to the machinability of the 5 wt.% Fe₂O₃-containing sample. However, introducing more than 5 wt.% Fe₂O₃ to the base glass prohibited the nucleation of MgF₂, and as a result, large micas formed within the glass. This together with precipitation of cordierite aggregates in highly doped glass with Fe₂O₃ led to lower machinability in these samples.     

Palm date fibers: analysis and enzymatic hydrolysis

Waste palm dates were subjected to analysis for composition and enzymatic hydrolysis of their flesh fibers. The fruit contained 32% glucose and 30% fructose, while the water-insoluble fibers of its flesh consisted of 49.9% lignin and 20.9% polysaccharides. Water-insoluble fibers were settled to 55% of its initial volume in 12 h. The presence of skin and flesh colloidal fibers results in high viscosity and clogging problems during industrial processes. The settling velocity of the fibers was improved by enzymatic hydrolysis. Hydrolysis resulted in 84.3% conversion of the cellulosic part of the fibers as well as reducing the settling time to 10 minutes and the final settled volume to 4% of the initial volume. It implies easier separation of the fibers and facilitates fermentation processes in the corresponding industries. Two kinds of high- and low-lignin fibers were identified from the water-insoluble fibers. The high-lignin fibers (75% lignin) settled easily, while the low-lignin fibers (41.4% lignin) formed a slurry suspension which settled very slowly. The hydrophilicity of these low-lignin fibers is the major challenge of the industrial processes.     

Supporting QoS in IEEE 802.11e wireless LANs over fading channel

Transferring real-time traffic such as voice and video over wireless LAN networks (WLAN) requires stringent delay and jitter requirements. Recently IEEE 802.11e standard has been emerged to support QoS in WLAN. One of the methods to provide QoS in this standard is Enhanced Distributed Channel Access (EDCA) which benefits form the concept of traffic categories. However, EDCA is a contention based method; therefore it can not guarantee strict QoS required by real-time services without proper network control mechanisms. In this paper, we analyze the effect of loss and delay caused by fading channel on EDCA performance. Then, we propose a modification to the media access scheme, called CAFD (Collision Avoidance with Fading Detection) to elevate the performance against channel failures. Moreover an adjustment for the maximum number of retransmissions is proposed to maintain the delay and jitter requirements of the real-time traffic. The performances of the proposed methods are evaluated by simulations.     

Composition and occurrence of aflatoxin M1 in cow's milk samples from Razavi Khorasan Province,Iran

The composition and occurrence of aflatoxin M₁ (AFM₁) were investigated in 60 samples of cow's raw milk samples from Razavi Khorasan Province of Iran. Only percentages of milk samples protein, lactose and total solids in samples collected during summer were slightly lower than the Iranian reference values. Compared with summer samples, higher percentages of milk samples components were observed in the winter. The overall mean AFM₁ level was 61 ± 8 ng/L, with 24 samples (40%) showing concentrations above the maximum permitted level established in Iran (50 ng/L). Control measures are urgently needed to avoid aflatoxin in milk samples produced in Razavi Khorasan Province.     

Protein Structural Changes During Preparation and Storage of Surimi

The changes in protein structure associated with the preparation and frozen storage of surimi were investigated. Raw surimi was prepared by repeatedly washing Alaska pollock flesh with chilled water. The product was either slowly frozen or underwent rapid freezing using liquid air; in either case it was then subjected to frozen storage at ‐20 °C for 24 mo. Fourier transform infrared/attenuated total reflectance (FTIR/ATR) spectroscopy showed that during preparation of surimi, the a‐helix content increased with increased number of washing cycles. Differential scanning calorimetry (DSC) revealed a shift in the thermal transition of actin to a higher temperature during surimi preparation. Electrophoresis, FTIR/ATR spectroscopy, and DSC results revealed a loss of myofibrillar proteins from surimi after 3 washing cycles, suggesting that 3 washing cycles were adequate to prepare surimi. Sodium dodecyl sulfate‐polyacrylamide gel electrophoresis (SDS‐PAGE) showed relatively minor changes in protein subunit structure with some loss of the myosin light chains (MLC); myosin heavy chain (MHC), actin, and tropomyosin were found to be relatively stable. Native‐PAGE showed no major changes in surimi after 24 mo storage at ‐20 °C. FTIR/ ATR spectroscopy indicated a significant decrease in a‐helix relative to p‐sheet structure in surimi after 2 y of storage at ‐20 °C. The loss of α‐helical content was more significant in slowly frozen surimi compared with rapid‐frozen surimi samples. DSC results revealed a shift in the thermal transition of actin to lower temperatures during frozen storage of surimi.     

Preparation of Nanostructured ZnO Thin Films Using Magnetron Sputtering for the Gas Sensors Applications

ZnO is one of the most promising transparent conducting oxide materials, which widely used in thin film gas sensors. In this research, the dependence of the thermal oxidation time on structural, morphological and gas sensing properties of ZnO thin films is investigated. ZnO nanostructures are synthesized by using DC magnetron sputtering for deposition of pure zinc layers on glass substrates and then thermal oxidation of deposited zinc layers to produce zinc oxide (ZnO) thin films. Obtained results from X-ray diffraction revealed that the degree of crystallinity and the average grain size of the ZnO deposited thin films enhance with increasing the thermal oxidation time. Surface topography and growth behavior of ZnO thin films have important role in optimization of gas sensing properties of these films. In this study, scanning electron microscopy and atomic force microscopy have been used to investigate the effective parameters related to the surface topography of the films. Obtained results from these analyzes revealed that the surface topography of ZnO deposited samples strongly depend on thermal oxidation time. Also the effect of thermal oxidation time on the performance of ZnO gas sensors is investigated. The results indicated that the ethanol gas sensing properties of ZnO samples improve with decreasing the size of grains.     

Study on the Hydrogenated Diamond-Like Carbon Films Synthesized by RF-PECVD from n-decane

Using a mixture of n-decane and hydrogen, diamond-like carbon thin films (DLCTFs) with high growth rate of 35?nm/min are deposited by radio frequency plasma enhanced chemical vapor deposition. We show that n-decane can be considered as a promising carbon source in DLCTF deposition. The properties of the deposited films such as structure, hydrogen content, deposition rate and refractive index are studied for 20, 50 and 100?sccm hydrogen flow rates (HFRs). It is shown that the deposition rate has a maximum of 35?nm/min for HFR?=?20?sccm and by increasing hydrogen concentration, deposition rate drops to 19?nm/min for HFR?=?100?sccm. The Raman spectra reveal that the films represent hydrogenated diamond-like carbon features. The photoluminescence background of the Raman spectra is used as a measure for hydrogen content of the films. The hydrogen content varies from 29 to 46% which yields a various amount of sp³ fraction. The results of the spectroscopic ellipsometry indicate that by increasing HFR, refractive index decreases from 2.1 to 1.9 at 632?nm. The aforementioned trends are attributed to the increase of hydrogen content in DLCTFs which is in very good agreement with enhancing of the photoluminescence background of the Raman spectra.