Synthesis of TiO2 nanoparticles by a combined sol-gel ball milling method and investigation of nanoparticle size effect on their photocatalytic activities

TiO₂ nanoparticles were synthesized by a sol-gel method and the effect of ball milling of dried gel on the particle size has been investigated. The results show that the ball milling has a crucial role in preparation of nanosized TiO₂ powder. Also thermal treatment at different temperatures can control the size of prepared nanoparticles. The photocatalytic activities of TiO₂ nanoparticles with different sizes were studied by photocatalytic degradation of Congo red dye using a homemade photoreactor. The photo degradation of Congo red dye was monitored by UV-Vis absorption measurements. It was found that the nanopowders which were synthesized at 550 °C with average particle size of 55 nm show the maximum photocatalytic activities. These nanopowders which were a mixture of anatase and rutile phases did not show the same photocatalytic effect on Eriochrome black, Bromocresol green, Methyl orange and Rose Bengal dyes.     

Reduction of formaldehyde emission from plywood

The aim of this work is to evaluate performances of tannin-based resins designed as adhesive in the plywood production. For this purpose, a part of phenol formaldehyde (PF) and melamine formaldehyde (MF) in the classic adhesive formulation was replaced by tannin. The physical properties of the formulated resins (rheological characterization, etc.) were measured. In order to analyze the mechanical performance of tannin-based resins, plywood panels were produced and the mechanical properties including tensile strength wood failure and three-point bending strength were investigated. The performance of these panels is comparable to those of plywood panels made by commercial PF and MF. The results showed that the plywood panels bonded with tannin–PF (PFT) and tannin–MF (MFT) resins exhibited better mechanical properties in comparison to the plywood panels made of commercials PF and MF. The introduction of small properties of tannin in PF and MF resins contribute to the improvement of the water performance of these adhesives. The formaldehyde emission levels obtained from panels bonded with tannin-based resins were lower than those obtained from panels bonded with control PF and MF. Although there are no actual reaction at all between PF, MF, and tannin, addition of tannin significantly improves the water resistance of PF and MF resins. This is a novel finding that manifests the possibility of replacing a convention PF and MF resins by tannin. Modified adhesive is one of the goals in the plywood production without changing any of their production conditions with improvement to their overall properties.     

Polyvinyl Alcohol/Alginate/Zeolite Nanohybrid for Removal of Metals

A novel polyvinyl alcohol/alginate/zeolite nanohybrid adsorbent for the adsorption of Ni(II) and Co(II) metal ions was prepared by the casting method. The prepared adsorbent was characterized by Fourier transform infrared spectroscopy, scanning electron microscopy as well as Barrett-Joyner-Halenda and Brunauer-Emmett-Teller analyses. The optimum adsorption conditions in terms of content of zeolite nanoparticles, adsorbent dosage, and initial pH were determined. The kinetic data for both ions were well described by the double-exponential kinetic model. The obtained Langmuir maximum adsorption capacities of Ni(II) and Co(II) metal ions were 81.51 and 79.58 mg g⁻¹, respectively. The adsorption/desorption experiments showed a good performance after 5 cycles of adsorption.     

Dielectrophoretic trapping of selenium nanorods for use in device applications

Dielectrophoretic alignment of the Selenium (Se) nanorods is reported for electrical characterization and possible applications as micro/nano devices. Selenium nanorods were successfully synthesized using a reverse microemulsion process. The produced material was investigated structurally using X-ray diffraction and transmission electron microscope. Suspensions of the Se powder in the concentration of 0.1 (g/l) were prepared in pure ethanol. Interdigitated platinum electrodes were employed for manipulation of suspended materials in the fluid. When Se particles were exposed to the platinum electrodes in two frequencies of 10 and 100 kHz, dielectrophoretic force captured suspended particles onto the interdigitated micro-electrode array. The trapped Se nanorods were aligned along the electric field lines and bridged the electrode gaps. Dielectrophoretic entrapment of Se nanorods on microelectrode was also detected by impedance measurements. The device was characterized and can potentially be used as a nanodevice.     

Comparative and competitive adsorption of Cu(II), Cd(II) and Pb(II) onto Sepia pharaonis endoskeleton biomass from aqueous solutions

In this research, the possibility of simultaneous removal of lead, cadmium and copper divalent ions from water samples through the use of Sepia pharaonis endoskeleton powder (SPEB) as bio‐material, was investigated. The bio‐sorbent was characterised by Fourier transform infrared spectrum (FT‐IR), atomic force microscopy (AFM) and X‐ray fluorescence (XRF). The different factors affecting the bio‐sorption process were studied. Langmuir and Freundlich isotherm models were applied to analyse the experimental data. The kinetic studies showed that the pseudo‐second order model kinetics were compatible with the investigated systems. It was found that under optimal conditions, this bio‐sorbent was efficient in the uptake of these heavy metal ions from both mono and multi‐metal solutions, and high removal percentages were achieved. This study verified the potential ability of SPEB as an efficient natural adsorbent for removal of Pb(II), Cd(II) and Cu(II) ions from river, tap and mineral water samples.     

Alumina-supported Mn(II), Co(II), Ni(II) and Cu(II) N,N-bis(salicylidene)-2,2-dimethylpropane-1,3-diamine complexes: Synthesis, characterization and catalytic oxidation of cyclohexene with tert-butylhydroperoxide and hydrogen peroxide

New square-planar manganese(II), copper(II), nickel(II) and cobalt(II) complexes of a tetradentate Schiff-base ligand “N,N-bis(salicylidene)-2,2-dimethylpropane-1,3-diamine, H₂[salpnMe₂]” have been prepared and characterized by elemental analyses, IR, UV–Vis, conductometric and magnetic measurements. The results suggest that the symmetrical Schiff-base is a bivalent anion with tetradentate N₂O₂ donors derived from the phenolic oxygen and azomethine nitrogen. The formulae was found to be [M(salpnMe₂)] for the 1:1 non-electrolytic complexes. Alumina-supported metal complexes (ASMC; [M(salpnMe₂)/Al₂O₃]) catalyze the oxidation of cyclohexene with tert-buthylhydroperoxide (TBHP) and hydrogen peroxide. Oxidation of cyclohexene with TBHP gave 2-cyclohexene-1-one, 2-cyclohexene-1-ol and 1-(tert-butylperoxy)-2-cyclohexene whereas, oxidation with H₂O₂ resulted in the formation of cyclohexene oxide and cyclohexene-1,2-diol. Manganese(II) complex supported on alumina “[Mn(salpnMe₂]–Al₂O₃” shows significantly higher catalytic activity than other catalysts.