Preparation, Structure, and Properties of Thermally and Mechanically Improved Aluminum Titanate Ceramics Doped with Alkali Feldspar

Aluminum titanate (AT) ceramic materials doped with alkali feldspar ((Na_0.6K_0.4)AlSi₃O₈) have been prepared. These ceramics exhibited high sinterability, large resistance to thermal decomposition, and large flexure strength. The existence of liquid-phase feldspar at sintering temperatures promoted the formation of AT ceramics as the sintering agent. It was considered that silicon ions substituting for aluminum ions at the surface of AT crystal grains lowered the surface energy and hindered the diffusion of Ti⁴⁺ and Al³⁺, giving rise to the large resistance to thermal decomposition. As a result, doping with alkali feldspar was found to effectively improve the mechanical and thermal properties of AT ceramics.     

A modified power control scheme for remedying the effects of traffic nonuniformity in LEO satellite communications systems

It has been shown in our previous studies that the geographical traffic nonuniformity considerably affects the performance of the low earth orbit satellite communications systems. In this paper, a new scheme for improving the throughput characteristics of these systems at nonuniform traffic distribution is proposed. In this method, some parts of the users under the satellite which is flying over the area with high traffic load are assigned to its neighbor satellites with lower transmitting power levels. It is shown that the method equalizes the traffic loads of the satellites to some degree and, hence, can improve the throughput characteristics of the system.     

Effect of water‐miscible solvents on the organic solvent‐resistant tyrosinase from Streptomyces sp. REN‐21

The effect of various water‐miscible organic solvents (ethanol, methanol, acetone, acetonitrile, N,N‐dimethylformamide (DMF) and dimethylsulfoxide (DMSO)) on the kinetics of 4‐tert‐butylcatechol (tBC) oxidation in the presence of different samples of organic solvent‐resistant tyrosinase (OSRT) has been studied. In contrast to mushroom tyrosinase the enzyme shows a high relative stability in solutions of organic solvents and increased activity toward the bulky and hydrophobic substrate, tBC, in respect to catechol. Rates of the studied OSRT‐catalyzed reactions are however reduced by the presence of organic solvents and for all studied samples of OSRT decrease exponentially with the content of an organic solvent. The effect has been satisfactorily described by the effect of organic solvents on the thermodynamic activity of tBC. The correlation of the inhibition parameters with the hydrophobicity of a particular solvent (log P), its intrinsic molar volume, V_i, and the Dimroth–Reichardt parameter, E_T(30), are shown. The results allow also the prediction of OSRT activity in aqueous solutions of water‐miscible organic solvents. Copyright © 2003 Society of Chemical Industry     

Novel three‐phase current‐regulated digital PWM and its behavioral analysis

There have been various studies of PWM algorithms for a three‐phase voltage‐source AC/DC power converter since the analog modulation scheme based on a triangular carrier wave was proposed in the 1960s. The PWM algorithm can be considered the heart of electronic power conversion. With progress in digital technology, there is an increasing need for gate signals to be generated directly by digital ICs, such as MPU, DSP, or FPGA/CPLD. This paper analyzes quantitatively the precision of current control of digital PWM taking account of both the sampling period and the delay time (the latter is inevitably accompanied by a digital procedure). The delay time is shown to have a double effect on the current error. In addition, the paper theoretically derives the conditions for digital PWM to meet the PPCR (Pulse Polarity Consistency Rule, that is, the next gate command moves only to the adjacent ones or commands). So far as the authors know, no paper has presented the mathematical requirements for PPCR taking account of the effect of the delay time of digital PWM. The derived theoretical results are summarized as digital PWM design criteria for a three‐phase PWM converter in order to facilitate practical implementation of the theory, guaranteeing PPCR behavior as well as quantitative accuracy of current regulation. © 2004 Wiley Periodicals, Inc. Electr Eng Jpn, 150(2): 62–77, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.10330     

The Effect of Barley Adjuncts on Free Amino Nitrogen Contents in Wort

Free amino nitrogen (FAN) and other low‐molecular‐weight nitrogen compounds (LNC) are highly important as nutrients for yeast. Many different types of low‐malt beer exist around the world, some of which are produced with barley as an adjunct. In these cases, inhibitors contained in barley are known to influence the amount of LNC in wort. Accordingly, it is important to investigate which proteinase class is key in producing these compounds. By investigating the relationship between the FAN contained in wort produced from malt and barley (barley adjunct wort) and malt proteinase activity, it was found that cysteine proteinase and 1,10‐orthophenanthroline (O‐Phen)‐inhibitable metallo proteinases had a significant correlation to the barley adjunct wort FAN levels. In addition, the relationship between malting conditions and these proteinase activities was investigated and the conditions defined for maximal production of proteinases as follows: steeping degree, 50%; germination temperature, 12°C; germination days, 6 days; water spray, 3 times and concentration of gibberellic acid, 10 mg/kg (barley).     

护毛法回收的猪毛通过爆发性膨胀处理的溶解性

本文报导了通过爆发性膨胀增加猪毛溶解度的方法,从而使得保毛脱毛法所回收的猪毛能够得到更有效的利用。     

A note on the resistance to brittle fracture in various ceramic materials

The square of the ratio of the abraded bending strength, _d, to the unabraded bending strength, , is proposed as a measure of the resistance to crack propagation in ceramic materials. Data for various porcelains, glass-ceramics, and glasses showed that _d is essentially constant and that (_d/)² decreased rapidly with increase of the unabraded strength.     

Evolutionary synthesis method of energy integrated distillation separation process

A two-stage evolutionary method is developed to synthesize an optimal energy integrated distillation separation process: the search of the separation sequence, and the introduction of energy integration to the given separation sequence. For the former an evolutionary procedure first generating initial separation sequences and then evolving them is developed. For the latter an evolutionary procedure, first indicating the direction of the evolution by the thermodynamic analysis and then estimating it based on the objective function, is developed. An example problem of a five-component separation demonstrates the effectiveness of this proposed method.     

Temperature acceleration of CMOS IC operating life

We carried out the high temperature operating life test (HTOT) of CMOS ICs which include n-channel ROMs which were contaminated deliberately by leaving naked for a long time in the room ambient before moulding and got the bimodal failure distributions consisting of m = 0.3–0.5 and m = 2.6–3.3 parts in the Weibull chart.At the same time, the activation energy of 1.14 eV was obtained for m = 2.6–3.3 parts. In order to make clear the failure mechanism of the latter part, we made the test devices for detecting channel leakage current (abbrev. TEG) and checked the shift of leakage current and life acceleration due to temperature in HTOT. Then we found that leakage currents of TEGs have an incubation time, their activation energy was nearly equal to that of the CMOS ICs above and m = 2.6–3.3 for CMOS ICs were reasonably explained due to the gradient α of the logarithm of the median leakage current to that of time.Also we got a 40 times longer life for the same CMOS ICs coated with Si₃N₄ film instead of SiO₂. And finally, from these data, we could verify the cause of failure in CMOS ICs.     

Characteristics of heart rate variability entropy and blood pressure during hemodialysis in patients with end-stage renal disease

Entropy (ENT) is a newly developed measure of the complexity of heart rate variability (HRV). The aim of this study was to characterize the complexity of HRV in patients with end-stage renal disease (ESRD) and to find a possible clinical utility. Healthy subjects and patients with ESRD undergoing hemodialysis (HD) were recruited. The HD population consisted of patients with and without diabetes mellitus (DM). An electrocardiogram was recorded before HD, and blood pressure was measured during HD. The coefficients of variation of R-R intervals, high- and low-frequency components, and ratio of the low- to high-frequency components were measured as variables of HRV. The ENT was used to describe the complexity of HRV. Forty-six healthy subjects and 27 HD patients participated in this study. The ENT negatively correlated with the duration of DM (p = 0.001), systolic blood pressure (p = 0.003), and mean blood pressure (p = 0.004) before a HD session. ENT in HD patients was lower than that in healthy subjects (p < 0.01). ENT in HD patients with DM was lower than that in HD patients without DM (p < 0.01). The change in systolic blood pressure (DeltaSBP) during a HD session showed high correlations to ENT and ultrafiltration rate (UFR) of the dialyzer. The following equation was obtained: DeltaSBP = 2.25 x ENT - 2.28 x UFR - 21.27 (R2 = 0.805; p < 0.0001). ENT decreased with uremic and diabetic status. ENT also represents a possible prediction of hypotension during a HD session.