Poly(7-oxanorbornenes) carrying 2,2,6,6-tetramethylpiperidine-1-oxy (TEMPO) radicals: Synthesis and charge/discharge properties

TEMPO-containing 7-oxanorbornene monomers 1-4 (TEMPO = 2,2,6,6-tetramethylpiperidine-1-oxy) were synthesized and polymerized via ring-opening metathesis using a ruthenium carbene catalyst. Monomers 1 and 3 gave polymers with number-average weights of 80?100 and 112?200 in 85 and 96% yields, respectively, whereas monomers 2 and 4 did not provide high molecular weight polymers. Poly(1) and poly(3) were soluble in common solvents including CHCl₃, CH₂Cl₂ and THF, while insoluble in hexane, diethyl ether and MeOH. They were thermally stable up to ca. 240 °C according to the TGA measurements in air. The secondary batteries utilizing the present polymers as cathode-active material demonstrated reversible charge/discharge processes, whose discharge capacities were 107 and 92.8 A h/kg, and displayed excellent high-rate charge and discharge properties. These cells demonstrated excellent cycle life, e.g., the discharge capacities of poly(1) and poly(3) showed less than 10% decrements even after 100 cycles.     

Effects of water-soluble carbohydrate content on silage fermentation of wheat straw

To determine a suitable initial water-soluble carbohydrate (WSC) content to make wheat straw natural fermentation successful and to study fermentation characteristics, glucose was used to adjust the initial WSC content to 1.4%, 4.0%, 5.0%, 6.0%, 7.0%, 8.0%, 9.0%, and 10.0% dry matter (DM) in the wheat straw. At 30 d of fermentation, there were three pHs: when the initial WSC content was 1.4%, the pH was 5.5; when the initial WSC contents were 4.0%, 5.0% and 6.0%, the pHs were near 5.1; and when the initial WSC contents were 7.0%, 8.0%, 9.0% and 10.0%, the pHs were near 4.0. The pattern of changes in WSC content during the fermentation was similar to that in pH. At 30 d of fermentation, there existed a dividing line in WSC remnants between the initial 6.0% WSC treatment and the initial 7.0% WSC treatment. When the initial WSC content was more than 7.0%, the remaining WSC content was more than 23.7 g/kg DM. When the initial WSC content was less than 6.0%, the remaining WSC content was less than 13.6 g/kg DM. Particularly for the 1.4% WSC treatment, the remaining WSC content was 2.1 g/kg DM. The results of the microbiological enumeration showed that with the increase in initial WSC content, the numbers of lactic acid bacteria (LAB) and other bacteria generally decreased. Denaturing gradient gel electrophoresis (DGGE) results showed that when the initial WSC content was beyond 7.0%, the LAB of the fermentation system were detected.     

Succession of bacterial and fungal communities during a traditional pot fermentation of rice vinegar assessed by PCR-mediated denaturing gradient gel electrophoresis

Denaturing gradient gel electrophoresis (DGGE) based on small subunit rRNA gene was applied to a traditional rice vinegar fermentation process in which the conversion of rice starch into acetic acid proceeded in a pot. The fungal DGGE profile indicated that the transition from Aspergillus oryzae to Saccharomyces sp. took place at the initial stage at which alcohol production was observed. The early stage was characterized by the coexistence of Saccharomyces sp. and lactic acid bacteria. Almost all of the bacterial DGGE bands related to lactic acid bacteria were replaced by bands derived from Lactobacillus acetotolerance and Acetobacter pasteurianus at the stage at which acetic acid started to accumulate. The microbial succession, tested in three different pots, was found to be essentially identical. Among the bacteria isolated at the early stage, some species differed from those detected by DGGE. This is the first report to reveal the microbial community succession that occurs during a unique vinegar fermentation process, as determined by a culture-independent method.     

由柏木制备纳米孔结构炭材料Ⅰ.制备与孔结构

柏木条经过热蒸气处理,成功地制备了纳米孔炭,无需另行活化,比表面积就可达1000m^2/g以上。如果在800℃～870℃炭化,柏木炭外表面积可达400m^2/g以上,与同样温度在氩气中炭化得到的柏木炭相比,后者微孔面积仅为30m^2/g～40m^2/g。在900℃以上炭化得到的柏木炭,微孔表面积高达800m^2/g以上,外表面积约为150m^2/g。柏木炭的孔结构可以通过调节过热蒸气的温度得到控制。     

Cell properties for modified PTMA cathodes of organic radical batteries

Stable nitroxyl radical polymers, such as poly (2,2,6,6-tetramethyl-1-piperidinyloxy-4-yl methacrylate) (PTMA), are known to be effective as cathode active materials for lithium rechargeable batteries. A water-based slurry was used to prepare PTMA composite electrodes, enabling successful production of homogeneous electrodes. This improved utilization of active material and enabled us to obtain specific capacities almost equal to the theoretical value (111 mAh g⁻¹). Lithium half cells were fabricated using these electrodes and using graphite as the anode active material, and their cycling stability, temperature dependence, rate capability and self-discharge rate were measured in detail. Although they showed 24% irreversible capacity on the first cycle, the capacity stabilized after the second cycle.     

Microstructure and Mechanical Properties of ZrO2(2Y)-Toughened Al2O3 Ceramics Fabricated by Spark Plasma Sintering

Spark plasma sintering (SPS) has been performed for 5 min at 1500°C and 30 MPa using submicrometer-sized Al₂O₃/ZrO₂(2Y) composite powders in the Al₂O₃-rich region. Dense ZrO₂-toughened Al₂O₃ (ZTA) ceramics show excellent mechanical strength; the strength of 1620 MPa is achieved in the ZTA with 50 mol% ZrO₂. The grain size of Al₂O₃ in ZTA decreases from 1.5 to 0.6 m with increased ZrO₂ content. Almost all the ZrO₂ grains (0.3 m) are located in the boundaries of the Al₂O₃ grains. Mechanical properties are discussed, with an emphasis on the relation between t-/m-ZrO₂ ratios and microstructures of ZTA.     

Initiation and growth behaviour of small internal fatigue cracks in Ti‐6Al‐4V via synchrotron radiation microcomputed tomography

Small internal fatigue cracks initiated in Ti‐6Al‐4V in the very high cycle regime were detected by synchrotron radiation microcomputed tomography (SR‐μCT) at SPring‐8 in Japan. The initiation and growth behaviours of the cracks were nondestructively observed, and the da/dN‐ΔK relationship was measured and compared with that obtained in a high vacuum environment. SR‐μCT revealed that more than 20 cracks were initiated in one specimen. The crack initiation life varied widely from 20% to 70% of the average fatigue life and had little influence on the growth behaviour that followed. The initiation site size of each internal crack detected in one specimen was comparable with the size of the fracture origins obtained in ordinary fatigue tests. These results suggest that the surrounding microstructures around the initiation site are likely a dominant factor on the internal fracture rather than the potential initiation site itself. The internal crack growth rates were lower than 10^?10 m/cycle, and extremely slow rates ranging from 10^?13 to 10^?11 m/cycle were measured in a lower ΔK regime below 5 MPa√m. The internal crack growth rate closely matched that of surface cracks in a high vacuum, and the reason for the very long life of internal fatigue fractures was believed to result from the vacuum‐like environment inside the internal cracks.     

Identification of anti-α-enolase autoantibody as a novel serum marker for endometriosis

Diagnosis of endometriosis needs invasive maneuvers. New serum marker that possesses both high sensitivity and high specificity has long been desired. To establish novel serum marker for endometriosis, serum autoantibodies (autoAbs) were investigated using proteomic approach. AutoAbs in sera of endometriotic patients and healthy controls were analyzed using a mesothelial cell line, 2-DE and Western blotting. Proteins in reacted spots were identified using MALDI TOF-MS with MASCOT analysis. ELISAs were established using recombinant proteins and autoAb-titers were estimated in sera of endometriotic patients, disease and healthy controls. Several autoAbs were identified. Anti-α-enolase (Eno1)-autoAb levels in endometriotic patients were significantly elevated compared with both healthy and disease controls. Sensitivity and specificity of serum anti-Eno1-autoAb was nearly comparable to serum CA125. When anti-Eno1-autoAb and CA125 assays were combined, diagnostic sensitivity and accuracy improved. Serum anti-Eno1-autoAb can be a new serum endometriotic marker and it is useful as a supplement assay for CA125. This study validates further clinical evaluation of this novel marker.     

Modification of Acid Anhydride-cured Epoxy Resins By N-Phenyl- maleimide–Styrene Copolymers and N-Phenylmaleimide–Styrene– p-Hydroxystyrene Terpolymers

N-Phenylmaleimide–styrene copolymers (PMS) and reactive N-phenylmaleimide–styrene–p-hydroxystyrene (HSt) terpolymers (PMSH) containing p-hydroxyphenyl groups were used to improve the toughness of bisphenol A diglycidyl ether epoxy resin cured with methyl hexahydrophthalic anhydride. PMS and PMSH were effective modifiers for epoxies. The morphologies of the modified resins depended on modifier structure and content. The most effective modification for the cured resins was attained because of the co-continuous structure of the modified resins in both PMS and PMSH modification systems. When using 15wt% of PMS (M¯_w 125000), the fracture toughness, K_IC, for the modified resin increased by 230%, with retention of flexural modulus and glass transition temperature, but with a loss of flexural strength, compared with the values for the unmodified epoxy resin. When using PMSH as the reactive modifier, the efficiency decreased with increase in HSt content, because of the increasing extent of dispersion of the PMSH-rich continuous phases. In the modification with 10wt% PMSH (1·0mol% HSt unit, M¯_w 294000), the modified resin had balanced physical properties. © of SCI.