Tensile Properties and Failure Mechanism of a New 3D Nonorthogonal Woven Composite Material

Tensile properties and failure mechanism of a newly developed three-dimensional (3D) woven composite material named 3D nonorthogonal woven composite are investigated in this paper. The microstructure of the composite is studied and the tensile properties are obtained by quasi-static tensile tests. The failure mechanism of specimen is discussed based on observation of the fracture surfaces via electron microscope. It is found that the specimens always split along the oblique yarns and produce typical v-shaped fracture surfaces. The representative volume cell (RVC) is established based on the microstructure. A finite element analysis is conducted with periodical boundary conditions. The finite element simulation results agree well with the experimental data. By analyzing deformation and stress distribution under different loading conditions, it is demonstrated that finite element model based on RVC is valid in predicting tensile properties of 3D nonorthogonal woven composites. Stress distribution shows that the oblique yarns and warp yarns oriented along the x direction carry primary load under x tension and that warp yarns bear primary load under y tension.     

Fatigue Life Prediction of Carbon Fiber-Reinforced Ceramic-Matrix Composites at Room and Elevated Temperatures. Part I: Experimental Analysis

This paper presents an experimental analysis on the fatigue behavior in C/SiC ceramic-matrix composites (CMCs) with different fiber preforms, i.e., unidirectional, cross-ply and 2.5D woven, at room and elevated temperatures in air atmosphere. The experimental fatigue life S???N curves of C/SiC composites corresponding to different stress levels and test conditions have been obtained. The damage evolution processes under fatigue loading have been analyzed using fatigue hysteresis modulus and fatigue hysteresis loss energy. By comparing the experimental fatigue hysteresis loss energy with theoretical computational values, the interface shear stress corresponding to different peak stress, fiber preforms and test conditions have been estimated. It was found that the degradation of interface shear stress and fibres strength caused by oxidation markedly decreases the fatigue life of C/SiC composites at elevated temperature.     

Finite Element Analysis of 2.5D Woven Composites,Part I: Microstructure and 3D Finite Element Model

A new parameterized finite element model, called the Full-cell model, has been established based on the practical microstructure of 2.5D angle-interlock woven composites. This model considering the surface layer structure can predict the mechanical properties and estimate the structural performance such as the fiber volume fraction and inclination angle. According to introducing a set of periodic boundary condition, a reasonable overall stress field and periodic deformation are obtained. Furthermore, the model investigates the relationships among the woven parameters and elastic moduli, and shows the structural variation along with the corresponding woven parameters. Comparing the results calculated by FEM with the experiments, the veracity of calculation and reasonability based on the Full-cell model are confirmed. In the meantime, the predicted results based on the Full-cell model are more closed to the test results compared to those based on the Inner-cell model.     

Modeling the Tensile Strength of Carbon Fiber − Reinforced Ceramic − Matrix Composites Under Multiple Fatigue Loading

An analytical method has been developed to investigate the effect of interface wear on the tensile strength of carbon fiber ? reinforced ceramic ? matrix composites (CMCs) under multiple fatigue loading. The Budiansky ? Hutchinson ? Evans shear ? lag model was used to describe the micro stress field of the damaged composite considering fibers failure and the difference existed in the new and original interface debonded region. The statistical matrix multicracking model and fracture mechanics interface debonding criterion were used to determine the matrix crack spacing and interface debonded length. The interface shear stress degradation model and fibers strength degradation model have been adopted to analyze the interface wear effect on the tensile strength of the composite subjected to multiple fatigue loading. Under tensile loading, the fibers failure probabilities were determined by combining the interface wear model and fibers failure model based on the assumption that the fiber strength is subjected to two ? parameter Weibull distribution and the loads carried by broken and intact fibers satisfy the Global Load Sharing criterion. The composite can no longer support the applied load when the total loads supported by broken and intact fibers approach its maximum value. The conditions of a single matrix crack and matrix multicrackings for tensile strength corresponding to multiple fatigue peak stress levels and different cycle number have been analyzed.     

One weight $$\mathbb {Z}_2\mathbb {Z}_4$$ additive codes

We study one weight \(\mathbb {Z}_2\mathbb {Z}_4\) additive codes. It is shown that the image of an equidistant \(\mathbb {Z}_2\mathbb {Z}_4\) code is a binary equidistant code and that the image of a one weight \(\mathbb {Z}_2\mathbb {Z}_4\) additive code, with nontrivial binary part, is a linear binary one weight code. The structure and possible weights for all one weight \(\mathbb {Z}_2\mathbb {Z}_4\) additive codes are described. Additionally, a lower bound for the minimum distance of dual codes of one weight additive codes is obtained.     

Partial permutation decoding for MacDonald codes

We show how to find s-PD-sets of the minimal size \(s+1\) for the \(\left[ \frac{q^n-q^u}{q-1},n,q^{n-1}-q^{u-1}\right] _q \) MacDonald q-ary codes \(C_{n,u}(q)\) where \(n \ge 3\) and \(1 \le u \le n-1\). The construction of [6] can be used and gives s-PD-sets for s up to the bound \(\lfloor \frac{q^{n-u}-1}{(n-u)(q-1)} \rfloor -1\), of effective use for u small; for \(u \ge \lfloor \frac{n}{2} \rfloor \) an alternative construction is given that applies up to a bound that depends on the maximum size of a set of vectors in \(V_u(\mathbb {F}_q)\) with each pair of vectors distance at least 3 apart.     

A Review on InGaSb Growth under Microgravity and Terrestrial Conditions Towards Future Crystal Growth Project Using Chinese Recovery Satellite SJ-10

The paper reviewed the previous microgravity experiment using Chinese recovery satellite, the in-situ measurement of composition profile in the solution by X-ray penetration method and homogeneous growth of InGaSb by temperature freezing method under terrestrial condition for making clear the effect of gravity on the growth of InGaSb ternary alloy semiconductor crystals. The previous experimental results showed that the shape of solid/liquid interfaces and composition profile in the solution were significantly affected by gravity. Based on the previous microgravity experimental results, experimental conditions were investigated to grow homogeneous In _xGa _1?xSb with higher indium composition at Chinese recovery satellite SJ-10 in near future.     

Analysis of Non-Equilibrium Fluctuations In A Ternary Liquid Mixture

From the benchmark values of the diffusion and thermodiffusion coefficients of the tetralin, isobutylbenzene and n-dodecane ternary mixture, and the published optical contrast factors, we have evaluated the theoretical amplitudes of the two composition modes of the refractive-index fluctuations. Shadowgraph experiments have been performed on ground, where the current theory is expected to be correct only for large wave vectors. Two decay times have been observed experimentally. The fastest one being related to the thermal diffusivity of the mixture, while the slower one to mass diffusion. Hence, it has not been possible to distinguish the two eigenvalues of the mass diffusion matrix, a problem also encountered in traditional light-scattering with ternary mixtures of similar-size molecules. Thus, to compare the measured Intermediate Scattering Function with theory, we fix the amplitudes and decay rates to the benchmark values, use the wave number as a fitting parameter, and compare it to the experimental wave number. The good agreement between theory and experiments for the larger wave numbers validates the theory developed for the microgravity conditions.