Thermoelectric properties of Bi and Cu co-doped Ca3Co2O6single crystals

Single crystals of Bi and Cu-doped Ca₃Co₂O₆were synthesized in a molten K₂CO₃flux. Using an obtained single crystal of (Ca_0.985(5)Bi_0.015(5))₃(Co_0.990(3)Cu_0.010(3))₂O₆elongated to the c-axis direction of the crystal structure, the electric resistivity (ρ) and Seebeck coefficient (S) were measured from room temperature to over 1000 K in air. The single crystal showed p-type semiconducting behavior with ρ values of 1.8 Ω cm at 303 K and 0.017 Ω cm at 1000 K. The S values were +254 μ VK^{− 1} at 325 K, +360 μ VK^{− 1} at 420 K, and +214 μ VK^{− 1} at 1000 K. The power factor (S ² ρ ^{− 1}) increased with an increase of temperature and attained 2.70 × 10^{− 4} Wm^{− 1}K^{− 2} at 1000 K.     

Rolling and swaying motion estimation for a mobile robot by using omnidirectional optical flows

Described here is a method for estimating rolling and swaying motions of a mobile robot using optical flow. We have proposed an image sensor with a hyperboloidal mirror for the vision-based navigation of a mobile robot. Its name is HyperOmni Vision. The radial component of optical flow in HyperOmni Vision has a periodic characteristic. The circumferential component of optical flow has a symmetric characteristic. The proposed method makes use of these characteristic to estimate robustly the rolling and swaying motion of the mobile robot. Correspondence to: Y. Yagi e-mail: y-yagi@sys.es.osaka-u.ac.jp     

High Electron Mobility Limited by Remote Impurity Scattering

Mobility of two-dimensional electron gas due to remote impurity scattering is evaluated in modulation-doped AlGaAs/GaAs heterostructures. Observed high electron mobility exceeding 10⁶ cm²/Vs is well explained by the remote impurity scattering, where screening effect is properly taken into account.     

Advances in nature-guided materials processing

The center of excellence (COE) titled ‘The Creation of Nature-Guided Materials Processing’ has been established in Nagoya University as the 21st Century COE Program supported by Ministry of Education, Culture, Sports, Science and Technology. In the Nature COE, various activities on the education and research are being performed through learning the laws of nature, namely, methods of attaining ‘appearance of the maximum function under the minimum substance and energy consumption’, which the nature and living organisms have acquired through their evolution in long period. Together with such educational programs for PhD students as research incentive, oversea training, and external evaluation programs, an ‘Open-Cluster Program’ was originated for promoting researches proposed by research groups consisting of young researchers in and out of the university and also for fostering them.

The researches are being advanced on materials used for living bodies, mimicking structures which nature or living bodies are forming, and producing materials by mimicking processes to form the structures observed in the nature or the living bodies. In this COE, these researches are conducted by four groups to extend the processes observed in the natural world to a new type of processing, that is, thoroughly examined and rationalized by plunging a scalpel of engineering and to establish a new academic field of materials science and engineering.     

X-ray CCD calibration system using fluorescent lines

We have developed a CCD calibration system using fluorescent X-ray lines with energies ranging from 1.49 keV (Al K) to 11.2 keV (Se K). The absolute X-ray flux is calibrated by a gas proportional counter, while the emerging spectra are monitored by solid-state silicon detectors. In order to suppress contaminating X-rays in the fluorescence spectra, mechanical collimators were set in the X-ray beam line, high-purity targets for fluorescent lines were used, and band-pass filters were put on the X-ray beam line. As for the purity of the fluorescent X-rays, the typical purity achieved was 98%.     

Development and Use of a Kinetical and Real-Time Monitoring System to Analyze the Replication of Hepatitis C Virus

In microbiological research, it is important to understand the time course of each step in a pathogen’s lifecycle and changes in the host cell environment induced by infection. This study is the first to develop a real-time monitoring system that kinetically detects luminescence reporter activity over time without sampling cells or culture supernatants for analyzing the virus replication. Subgenomic replicon experiments with hepatitis C virus (HCV) showed that transient translation and genome replication can be detected separately, with the first peak of translation observed at 3–4 h and replication beginning around 20 h after viral RNA introduction into cells. From the bioluminescence data set measured every 30 min (48 measurements per day), the initial rates of translation and replication were calculated, and their capacity levels were expressed as the sums of the measured signals in each process, which correspond to the areas on the kinetics graphs. The comparison of various HuH-7-derived cell lines showed that the bioluminescence profile differs among cell lines, suggesting that both translation and replication capacities potentially influence differences in HCV susceptibility. The effects of RNA mutations within the 5′ UTR of the replicon on viral translation and replication were further analyzed in the system developed, confirming that mutations to the miR-122 binding sites primarily reduce replication activity rather than translation. The newly developed real-time monitoring system should be applied to the studies of various viruses and contribute to the analysis of transitions and progression of each process of their life cycle.     

Detection and Quantitation of Left-to-Right Shunts from Radionuclide Angiocardiography Using the Homomorphic Deconvolution Technique

The homomorphic filtering method is described for the detection and quantitation of left-to-right shunts from radionuclide angiocardiography. First, the method is investigated theoreticatly and numerically using a realistic model with systemic recirculation. It is demonstrated that even in a noisy situation the shunt flow fraction can be relatively well estimated, if only the characteristics of the fiters used are suitable. Second, the method is applied to real data, i.e., the pulmonary time-activity curves from radionucUde anglocardiography. The presence or absence of a left-to-right shunt is determined using the ratio AT/MTT. The pulmonary-to-systemic flow ratios calculated from the areas of the two decomposed curves are compared with those from oximetry at cardiac catheterization. Good agreement between the Qp/Qs ratios calculated by oximetry and radionucUide angiocardiography is obtained.     

One-step route to a hybrid TiO2/TixW1?xN nanocomposite by in situ selective carbothermal nitridation

Metal oxide/nitride nanocomposites have many existing and potential applications, e.g. in energy conversion or ammonia synthesis. Here, a hybrid oxide/nitride nanocomposite (anatase/Ti_xW_1−xN) was synthesized by an ammonia-free sol–gel route. Synchrotron x-ray diffraction, complemented with electron microscopy and thermogravimetric analysis, was used to study the structure, composition and mechanism of formation of the nanocomposite. The nanocomposite contained nanoparticles (<5 nm diameter) of two highly intermixed phases. This was found to arise from controlled nucleation and growth of a single oxide intermediate from the gel precursor, followed by phase separation and in situ selective carbothermal nitridation. Depending on the preparation conditions, the composition varied from anatase/Ti_xW_1−xN at low W content to an isostructural mixture of Ti-rich and W-rich Ti_xW_1−xN at high W content. In situ selective carbothermal nitridation offers a facile route to the synthesis of nitride-oxide nanocomposites. This conceptually new approach is a significant advance from previous methods, which generally require ammonolysis of a pre-synthesized oxide.     

Effect of Platelet-Rich Plasma on M1/M2 Macrophage Polarization

Osteoarthritis of the knee (OAK) is a chronic degenerative disease and progresses with an imbalance of cytokines and macrophages in the joint. Studies regarding the use of platelet-rich plasma (PRP) as a point-of-care treatment for OAK have reported on its effect on tissue repair and suppression of inflammation but few have reported on its effect on macrophages and macrophage polarization. Based on our clinical experience with two types of PRP kits Cellaid Serum Collection Set P type kit (leukocyte-poor-PRP) and an Autologous Protein Solution kit (APS leukocyte-rich-PRP), we investigated the concentrations of humoral factors in PRPs prepared from the two kits and the effect of humoral factors on macrophage phenotypes. We found that the concentrations of cell components and humoral factors differed between PRPs purified using the two kits; APS had a higher concentration of M1 and M2 macrophage related factors. The addition of PRP supernatants to the culture media of monocyte-derived macrophages and M1 polarized macrophages revealed that PRPs suppressed M1 macrophage polarization and promoted M2 macrophage polarization. This research is the first to report the effect of PRPs purified using commercial kits on macrophage polarization.     

Numerical computation of two-loop box diagrams with masses

A new approach is presented to evaluate multi-loop integrals, which appear in the calculation of cross-sections in high-energy physics. It relies on a fully numerical method and is applicable to a wide class of integrals with various mass configurations. As an example, the computation of two-loop planar and non-planar box diagrams is shown. The results are confirmed by comparisons with other techniques, including the reduction method, and by a consistency check using the dispersion relation.