Effect of wall slip on blown film thickness distribution

One of the most important materials for blown film is high‐density polyethylene (HDPE) with wide molecular weight distribution. First, we computed a wall stress at the entrance of a spiral groove in a particular die during blown film processing on a particular condition, to which a similar condition is widely utilized in a film works. The computed value is about 170 kPa, while the HDPE melt slips at die wall at stresses above approximately 50 kPa. The stress of 170 kPa is sufficiently large for the slip occurrence of the melt. Then, we investigated the effects of wall slip and melt visosity on film thickness distribution in the circumferential direction; the distribution tends to decrease with decreasing wall slip and melt viscosity. This tendency is explained by considering flow distribution in a spiral mandrel die and polymer melt flow characteristics.     

The phase reversal effect of a fiber Bragg grating and its application to optical switches

We propose an interferometer‐type multistate optical switch and an interferometer‐type digital performance switch using a fiber Bragg grating (FBG) and the phase reversal effect. The effect is a reversing phenomenon of optical phase difference between the reflected and transmitted light from an FBG on a reflectivity spectrum dip between the main reflection band and first sideband. By combining this effect and reflectivity change, the multistate switch including only a single FBG can perform as a four‐state switch. In this paper we describe the principle of the phase reversal effect and some novel optical switch structures, and also the results of experimental examination. © 2003 Wiley Periodicals, Inc. Electr Eng Jpn, 143(3): 38–48, 2003; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.10136     

Time–frequency analysis of lamb waves caused by partial discharges and free particles in GIS

We investigated the propagation properties of Lamb waves in a GIS tank, using time–frequency analysis to diagnose the insulation performance of GIS. We measured the acoustic signals excited by metallic particles colliding with the tank sheath, and those emitted by partial discharge in the GIS. The wavelet transform was used to decompose the wave data into its time–frequency components. As a result, it was confirmed that Lamb waves with the dispersive property of the velocity are excited and propagate in a spiral path along the tank wall due to the cylindrical structure of the tank. Taking these results into consideration, we propose a new technique for identification of defect locations in GIS based on time–frequency analysis of acoustic signals with the wavelet transform. © 2003 Wiley Periodicals, Inc. Electr Eng Jpn, 145(3): 25–32, 2003; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.10163     

Photoconductivity of n-type semiconductor nanoparticle-doped poly(N-vinylcarbazole) films

TiO₂, CdS and ZnS nanoparticles that disperse stably in organic solvents are synthesized. Poly(N-vinylcarbazole) films doped with the n-type semiconductor nanoparticles are prepared with a cast method. The films exhibit a transient photocurrent when irradiated by a light pulse and act such as a diode when AC voltage is applied under continuous illumination. The transient photocurrent response and diode-like properties are significantly different depending on the kind of the nanoparticles and their amounts. The films doped with TiO₂ and CdS nanoparticles increase the transient photocurrent at lower doped amounts, which is remarkable for TiO₂-doped films. Time of flight analysis of the transient photocurrent shows that mobility of hole in PVK increases with increase in the amount of CdS and TiO₂. From the studies on the diode-like properties, the current increase at lower dopant concentration is concluded to be due to increase in the amount of holes by an electron transfer from PVK to the photo-excited nanoparticles. At higher doping with CdS nanoparticles, main charge carrier of the films is found to change from holes to electrons.     

Observations of seismic electromagnetic phenomena in VHF band by dual frequency method

Seismic electromagnetic (EM) phenomena have been observed at many laboratories with specially designed systems. Recently we can utilize radio receivers, personal computers, and communication systems with higher performances and reasonable cost. It is possible to observe seismic EM phenomena not only by specially designed systems but also by a simple observation system integrated by these devices and systems. We have created an observation system for seismic EM phenomena with them in the very high frequency (VHF) band, from 76 MHz to 90 MHz, assigned for FM broadcasting exclusive use in Japan. We are surrounded by many EM waves, such as broadcasting, communication usage, and man‐made noises. Thus, we have newly developed the dual frequency observation method. In this paper, we describe an observation method that can identify whether a received signal is a broadband EM wave or an artificial FM radio wave. Next, the observation results for broadband EM waves from galactic noise and solar flares are presented. Then, the observation results for FM radio waves reflected from sporadic E layer and the Leonid meteors are shown. Finally, the observation results for the detected broadband EM waves associated with the Geiyo earthquake are described. © 2006 Wiley Periodicals, Inc. Electr Eng Jpn, 155(4): 36–44, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20350     

A note on Dr. J.L. Snoek

J.L. Snoek is the eponym of the renowned relaxation effect: the Snoek peak, which is associated with the redistribution of carbon atoms in the bcc iron lattice under the application of the oscillatory stress. A brief review of the Snoek effect and a sketch of Snoek’s life are given; the latter is based on two Dutch articles.     

Shear-rate dependence of first normal stress difference of poly(isoprene-b-styrene) in solution near the order-disorder transition temperature

Viscoelastic properties of poly(isoprene-b-styrene) in dioctylphthalate under steady shear flow were measured near the order—disorder transition temperature. In ordered states, first normal stress difference N₁ is proportional to shear rate at low region, but becomes proportional to at the high region, similar to the N₁ behaviour of polymer blends undergoing shear-induced homogenization. Because the existence of microdomains was confirmed at the high region by the flow birefringence method, it is concluded that the above N₁ behaviour is not caused by shear-induced homogenization, but is probably caused by the shear-induced alignment of the microdomain structure.     

New sample cell configuration for wide-frequency dielectric spectroscopy: DC to radio frequencies

A new configuration for the sample cell to be used in broadband dielectric spectroscopy is presented. A coaxial structure with a parallel plate capacitor (outward parallel plate cell: OPPC) has made it possible to extend the frequency range significantly in comparison with the frequency range of the conventional configuration. In the proposed configuration, stray inductance is significantly decreased; consequently, the upper bound of the frequency range is improved by two orders of magnitude from the upper limit of conventional parallel plate capacitor (1 MHz). Furthermore, the value of capacitance is kept high by using a parallel plate configuration. Therefore, the precision of the capacitance measurement in the lower frequency range remains sufficiently high. Finally, OPPC can cover a wide frequency range (100 Hz-1 GHz) with an appropriate admittance measuring apparatus such as an impedance or network analyzer. The OPPC and the conventional dielectric cell are compared by examining the frequency dependence of the complex permittivity for several polar liquids and polymeric films.