Superconductivity of Zr-Nb-Si amorphous alloys

Superconducting amorphous alloys with high strength and good ductility have been found in rapidly quenched alloys of the Zr-Nb-Si system. These alloys were produced in a continuous ribbon form of 1 to 2 mm width and 0.02 to 0.03 mm thickness using a modified single roller quenching apparatus. The amorphous alloys were formed over the whole composition range between zirconium and niobium, but the silicon content was limited to the relatively narrow range between about 12 and 24 at%. All the amorphous alloys showed a superconducting transition whose temperature, T _c, increased from 2.31 to 4.20 K with increasing niobium content or with decreasing silicon content. The upper critical magnetic field, H _c2, and the critical current density, J _c, for Zr₁₅Nb₇₀Si₁₅ alloy were of the order of 4.5 Tesla(T) and 5.5×10⁶ A m^–2 at 1.5 K in the absence of applied field. The upper critical field gradient at T _c, , and the electrical resistivity at 4.2 K, _n, decreased from 2.89 to 2.10 T K^–1 and from 2.70 to 1.80m, respectively, with the amount of niobium. The Debye temperature, _D, the electron-phonon coupling constant, , and the bare density of electronic states at the Fermi level, N(E _f ) were calculated from the experimentally measured values of _n, , Young's modulus and density by using the strong-coupling theories. From the comparison of T _c with their calculated parameters, it was found that is the most dominant parameter for T _c. The GL parameter, , and the GL coherence length, _GL(0), were estimated to be 70 to 100 and about 7.6 nm, respectively, from the experimental values of and _n by using the GLAG theory and hence it is concluded that the present amorphous alloys are an extremely dirty type-II superconductor having a very weak flux pinning force.     

A high‐performance sorting algorithm for multicore single‐instruction multiple‐data processors

Many sorting algorithms have been studied in the past, but there are only a few algorithms that can effectively exploit both single‐instruction multiple‐data (SIMD) instructions and thread‐level parallelism. In this paper, we propose a new high‐performance sorting algorithm, called aligned‐access sort (AA‐sort), that exploits both the SIMD instructions and thread‐level parallelism available on today's multicore processors. Our algorithm consists of two phases, an in‐core sorting phase and an out‐of‐core merging phase. The in‐core sorting phase uses our new sorting algorithm that extends combsort to exploit SIMD instructions. The out‐of‐core algorithm is based on mergesort with our novel vectorized merging algorithm. Both phases can take advantage of SIMD instructions. The key to high performance is eliminating unaligned memory accesses that would reduce the effectiveness of SIMD instructions in both phases. We implemented and evaluated the AA‐sort on PowerPC 970MP and Cell Broadband Engine platforms. In summary, a sequential version of the AA‐sort using SIMD instructions outperformed IBM's optimized sequential sorting library by 1.8 times and bitonic mergesort using SIMD instructions by 3.3 times on PowerPC 970MP when sorting 32 million random 32‐bit integers. Also, a parallel version of AA‐sort demonstrated better scalability with increasing numbers of cores than a parallel version of bitonic mergesort on both platforms. Copyright © 2011 John Wiley & Sons, Ltd.     

Colorimetric microdetermination of sulphites in foods by use of the modified rankine apparatus. IV.

Summary Detection and determination of traces of sulphites in foods was attempted by use of the modified Rankine apparatus and pararosaniline colorimetry. Replacement of alkaline titration reported previously by pararosaniline colorimetry lowered the absolute detection limit from 30 g (titration method) to 2 g. In view of clean analysis, in the color developing system, 0.1 N-sodium hydroxide was used in place of mercuric chloride solution commonly used as an absorbant of sulphites. In order to prevent oxidative decomposition of sulphites during operation, nitrogen gas was used as carrier instead of air. Dimedone and sodium azide were used for the elimination of aldehydes and nitrites, respecitvely, in the sample, which will disturb the color development of sulphites with pararosaniline-formaldehyde reagents. With this improved method, it was possible to determine the residual sulphites in frozen peeled shrimps, sugared beans and other foods with low sulphite contents accurately.

---

Colorimetrische Mikrobestimmung von Sulfiten in Lebensmitteln bei Anwendung der modifizierten IV. Rankine Apparatur

Zusammenfassung Geringe Sulfitmengen in Lebensmitteln (geschälte Garnelen, gezuckerte Bohnen) können colorimetrisch bestimmt werden. Die neuentwickelte Methode beruht auf einer Kombination von colorimetrischer Bestimmung mittels p-Rosanilin und der Bestimmungsmethode nach Rankine. Auf diese Weise lassen sich Gehalte von 2 g noch genau bestimmen. Bei der Farbentwicklung wurde das giftige Quecksilbertetrachlorid durch 0.1 n-NaOH ersetzt, anstelle von Luft Stickstoff als Trägergas verwendet und somit eine Oxydation des Sulfits während der Bestimmung vermieden. Da Nitrit und Aldehyde die Farbentwicklung stören, wurde ihr Einfluß durch Dimedon und Natriumazid ausgeschaltet.

---

---

Studies on the Analyses of Sulphites in Foods (IV)     

Hot-water treatment of sol–gel derived SiO2–TiO2 microparticles and application to electrophoretic deposition for thick films

SiO₂–TiO₂ spherical microparticles of about 0.7 μm in diameter were prepared by the sol–gel method. Anatase nanocrystals were formed in the microparticles and their specific surface area was increased after a hot-water treatment at 90 °C. From the changes in the concentration of I₂ photocatalytically generated from KI aqueous solution, the activity of the SiO₂–TiO₂ microparticles was found to increase with increasing the hot-water treatment time. Particulate, thick films were electrophoretically deposited on indium tin oxide (ITO)-coated glass substrates using the anatase nanocrystal-precipitated SiO₂–TiO₂ microparticles. The thickness of the electrophoretically deposited particulate film increased to be approximately 10 μm with an increase in applied voltage. The resultant thick film showed a high photocatalytic activity.     

Thermomechanical behavior of Ti-Ni shape memory alloy films deposited by DC magnetron sputtering

In this study, thermomechanical properties of titanium-nickel (Ti-Ni) shape memory alloy (SMA) films are investigated in order to derive constitutive relations. Ti-Ni SMA films, deposited by DC magnetron sputtering under controlled film composition, are characterized by uniaxial tensile tests. At room temperature (R.T.), Ti-Ni films having Ti contents less than 50 at% exhibit superelastic behavior, and those having Ti contents greater than 50 at% exhibit shape memory behavior. However, the Ni—53.2 at% Ti film fractured at a tensile strain of 0.8% because of an increase in brittleness with increasing Ti content. At elevated temperatures, Ti-Ni films having Ti contents of 50.2 to 52.6 at% undergo phase change from martensite to austenite. The Young's modulus of the Ti-Ni films depends on temperature at each phase, regardless of film composition. Film composition does, however, affect the measured material constants b_A, b_M, c_A, and c_M. Stress-strain curves calculated from the constructed constitutive equation closely agree with those obtained from tensile tests, for both the martensite and austenite phases. The constitutive equations are expected to find great utility in the design of Ti-Ni film-actuated microelectromechanical systems (MEMS).     

Satellite-Based Energy Balance to Assess Within-Population Variance of Crop Coefficient Curves

Quantifying evapotranspiration (ET) from agricultural fields is important for field water management, water resources planning, and water regulation. Traditionally, ET from agricultural fields has been estimated by multiplying the weather-based reference ET by crop coefficients (Kc) determined according to the crop type and the crop growth stage. Recent development of satellite remote sensing ET models has enabled us to estimate ET and Kc for large populations of fields. This study evaluated the distribution of Kc over space and time for a large number of individual fields by crop type using ET maps created by a satellite based energy balance (EB) model. Variation of Kc curves was found to be substantially larger than that for the normalized difference vegetation index because of the impacts of random wetting events on Kc, especially during initial and development growth stages. Two traditional Kc curves that are widely used in Idaho for crop management and water rights regulation were compared against the satellite-derived Kc curves. Simple adjustment of the traditional Kc curves by shifting dates for emergence, effective full cover, and termination enabled the traditional curves to better fit Kc curves as determined by the EB model. Applicability of the presented techniques in humid regions having higher chances of cloudy dates was discussed.     

Preparation of ferroelectric Ba(Ti/sub 0.85/Sn/sub 0.15/)O/sub 3/ thin films by metal-organic decomposition

Ferroelectric Ba(Ti/sub 0.85/Sn/sub 0.15/)O/sub 3/ (BTS/sub 15/) thin film is newly prepared on the Pt/Ti/SiO/sub 2//Si substrate by metal-organic decomposition. The firing condition is determined by thermogravimetric and differential thermal analysis. The BTS/sub 15/ thin film with a flat surface and uniform thickness is obtained by spin coating in N/sub 2/ atmosphere that avoids moisture. The BTS/sub 15/ film has a perovskite phase and a preferential [110] texture. It is also found that the crystalline structure is cubic at 24/spl deg/C with a lattice constant of 4.01 /spl Aring/, and a grain size of about 30 nm was estimated by Scherrer equation and SEM image. From P-E hysteresis loop at 20/spl deg/C, the polarization at E=0 and the electric field at P=0 are found to be 1.07 /spl mu/C/cm/sup 2/ and 24.0 kV/cm, respectively. It is observed that the dielectric constant decreases monotonously from about 830 to 630 with increasing temperature ranging from 20/spl deg/C to 50/spl deg/C. Finally, it is found that the BTS/sub 15/ thin film shows a sufficient ferroelectricity and is an attractive material for functional ferroelectric devices, such as thermal-type infrared sensors.     

Inside Front Cover: Fabrication of Ideally Ordered Nanoporous Alumina Films and Integrated Alumina Nanotubule Arrays by High‐Field Anodization (Adv. Mater. 17/2005)

A simple, low‐cost approach to fabricating large‐area highly ordered nanoporous alumina films in sulfuric acid solutions through a single‐step high‐field anodization, without the assistance of any additional process, is reported on p. 2115 by Chu and co‐workers. The critical high anodizing potential in the adopted electrolyte system increases with the ageing of solutions after a long period of anodization. Correspondingly, the applicable current density for stable anodization rises significantly, thus leading to high‐speed film growth. Uniform porous anodic alumina films in sulfuric acid solutions under a high electric field of 40–70 V and 1600–2000 A m^–2 are achieved.     

Parallel processing circuit of line image using neuristor

A simultaneous detecting circuit system of centers and lengths of some lines in one dimension is presented applying an electronic circuit model of the nervous axon with respect to signal transmission. This model consists of series of one basic section, and has functions of Neuristor. The circuit system has a paralell processing function. It is constructed by three layers. In the first layer each visual signal of lines is changed to electric pulse signal. In the second layer edges of each line are detected, and in the third layer these detected signals are converted into voltages which correspond to lengths of the lines. These functions were confirmed experimentally using its hardware.