Nanoporous structure of the cell walls of polycarbonate foams

Using CO₂ to prepare microcellular polycarbonate foams resulted in a pore diameter of 45 nm and a pore density of 10⁸ cm^?2 on the walls of microscale cells, which created nano/micro foams with an open cell structure. In this study, the craze nucleation theory and the bubble nucleation theory of foaming were combined to explain the mechanism of the foaming-induced nanopores (microvoids) on the cell walls. In the foaming process, the strain energy was developed in the cell walls by bubble nucleation and growth. With large strain energy, a nanoporous structure of the cell walls was formed by initiation of crazing. Because the foaming temperature affected the strain energy in the cell wall, the temperature became a key factor of forming microcellular structure as well as the nanopores on the cell walls. Our experimental results showed that the diameter and density of the nanopores were determined by the competitive movements between chain stretching and relaxation. Furthermore, certain solvents, such as acetone, were found to increase the nanopore density of the walls by exploiting the plasticization effect of the solvent on the reduction of surface tension and viscosity.     

Modeling of Nonlinear Magnetizing Characteristics of Pole Transformer for Analyzing Islanding Prevention of Photovoltaic System

With increasing penetration of distributed generators such as photovoltaic (PV) systems in distribution systems, it is very important to quickly detect islanding caused by power system faults in order to assure electrical safety. We have developed a nonlinear magnetizing characteristics model of pole transformers for use in analyzing islanding prevention in PV systems. Basic experiments on the islanding detection were performed for verification of the proposed model. Analytical results obtained by the proposed model agreed well with experimental results.     

Evaluation of environmentally friendly lubricants for cold forging

The authors proposed double-layer-type environmentally friendly lubricants, which were composed of an undercoat, superior in adhering to a material, and an overcoat, superior in reducing the friction between the material and the die. The performance of these lubricants for cold forging was evaluated by the ring compression test, the combined forward rod-backward can extrusion-type friction test and the combined forward conical can-backward straight can extrusion-type friction test. The double-layer-type lubricants showed comparable friction characteristics and anti-pick-up properties to a conversion coating lubricant, when the film thickness and surface treatment before coating were improved. In a practical application by cold multistage forging, the double-layer-type lubricants showed a similar performance to a conversion coating lubricant.     

A comment on pure-strategy Nash equilibria in competitive diffusion games

In [N. Alon, M. Feldman, A.D. Procaccia, M. Tennenholtz, A note on competitive diffusion through social networks, Inform. Process. Lett. 110 (2010) 221–225], the authors introduced a game-theoretic model of diffusion process through a network. They showed a relation between the diameter of a given network and existence of pure Nash equilibria in the game. Theorem 1 of their paper says that a pure Nash equilibrium exists if the diameter is at most two. However, we have an example which does not admit a pure Nash equilibrium even if the diameter is two. Hence we correct the statement of Theorem 1 of their paper.     

Scaling up experiments of honeycomb catalysts for oxidation of hydrogen and methane gases

For a large volume air cleanup system in nuclear fusion facility honeycomb type oxidizing catalyst offers more useful advantage in terms of their low pressure drop than the conventional particle packed bed. Scaling up examination of 35 times large volume Pd catalyst deposit on metal honeycomb Al–Cr-steel alloy had been performed comparing with fundamental small size honeycomb. The catalyst was heated up to over 400 °C with stepwise by combined the inner and external heaters under various flow rate of processing gas containing various concentrations of hydrogen and methane. Then oxidizing reaction rates and the catalytic activation energies were evaluated and thermal property of catalyst bed was estimated considering exothermic oxidizing reaction in the process gas. As a result it was revealed that the scaling up honeycomb catalyst bed would be practically useful for the air cleanup system.     

Performance Comparison of Circuits for Pole‐Mounted STATCOM Using SiC Devices

The recent years have seen an increasing trend in the cumulative installed capacity of distributed generators. As a result, voltage management may become difficult in existing power distribution systems in the future. A STATCOM (STAtic synchronous COMpensator) is a promising option for solving this problem because it can control reactive power rapidly and continuously. For a distribution system, STATCOM needs to be pole‐mounted to realize its low cost. However, a transformer for a STATCOM is large and heavy, and hence it is difficult to install a STATCOM on a distribution pole. We adopt a transformerless STATCOM to reduce STATCOM size and use SiC devices with low‐loss performance to obtain a more compact and efficient STATCOM. There are a large number of circuits available for a STATCOM, and there has been considerable research on performance comparisons among these circuits. However, these comparisons were drawn under different conditions, including switching frequency and level number for the circuits. In addition, these comparisons do not include the use of SiC devices. We made an equitable comparison for a 100 kVa pole‐mounted STATCOM using SiC devices. We discuss the performance and characteristics of each circuit in terms of efficiency and volume.     

A Method for Reducing the Dead‐Time Voltage and Impedance Voltage in a Series Voltage Compensator

Many research groups are developing series voltage compensators. In a series converter, since a transformer is used in series in the power system, the power system current flows into the voltage source inverter through the transformer. The inverter current, which is determined by the transformation ratio, gives rise to an error voltage that consists of a dead‐time voltage and an impedance voltage. The error voltage is generated even when the reference voltage is zero. This paper describes the mechanism by which the error voltage occurs and proposes a method for reducing the error voltage. © 2013 Wiley Periodicals, Inc. Electr Eng Jpn, 186(3): 85–93, 2014; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.22333