Compiling for Reduced Bit-Width Queue Processors

Embedded systems are characterized by the requirement of demanding small memory footprint code. A popular architectural modification to improve code density in RISC embedded processors is to use a reduced bit-width instruction set. This approach reduces the length of the instructions to improve code size. However, having less addressable registers by the reduced instructions, these architectures suffer a slight performance degradation as more reduced instructions are required to execute a given task. On the other hand, 0-operand computers such as stack and queue machines implicitly access their source and destination operands making instructions naturally short. Queue machines offer a highly parallel computation model, unlike the stack model. This paper proposes a novel alternative for reducing code size by using a queue-based reduced instruction set while retaining the high parallelism characteristics in programs. We introduce an efficient code generation algorithm to generate programs for our reduced instruction set. Our algorithm successfully constrains the code to the reduced instruction set with the addition of only 4% extra code, in average. We show that our proposed technique is able to generate about 16% more compact code than MIPS16, 26% over ARM/Thumb, and 50% over MIPS32 code. Furthermore, we show that our compiler is able to extract about the same parallelism than fully optimized RISC code.     

Topical Phenomena Observed in a Short-Gap Atmospheric Discharge Using Rotor and Post Electrodes

Correlation of light emission, discharge structure, waveform of the discharge current, electrode configuration, and electromagnetic radiation is examined with the intent of obtaining an effective means for preventing electromagnetic interference (EMI) due to a short-gap discharge. The electromagnetic radiation (EMR) level resulting from a current step which, in turn, was formed by a discrete movement of a cathode spot was clearly recognized. A combination of needle rotor and needle post gave the smallest electromagnetic radiation level in the experiments.     

Strength Analysis of Yttria-Stabilized Tetragonal Zirconia Polycrystals

Tensile strength of Y₂O₃-stabilized ZrO₂ polycrystals (Y-TZP) was measured by a newly developed tensile testing method with a rectangular bar. The tensile strength of Y-TZP was lower than that of the three-point bend strength, and the shape of the tensile strength distribution was quite different from that of the three-point bend strength distribution. It was difficult to predict the distribution curve of the tensile strength using the data of the three-point bend strength by one-modal Weibull distribution. The distribution of the tensile strength was analyzed by two- or three-model Weibull distribution coupled with an analysis of fracture origins. The distribution curve of the three-point bend strength which was estimated by multimodal Weibull distribution agreed favorably with that of the measured three-point bend strength values. A two-modal Weibull distribution function was formulated approximately from the distributions of the tensile and three-point bend strengths, and the estimated two-modal Weibull distribution function for the four-point bend strength agreed well with the measured four-point bend strength.     

A Method for Reducing the Dead‐Time Voltage and Impedance Voltage in a Series Voltage Compensator

Many research groups are developing series voltage compensators. In a series converter, since a transformer is used in series in the power system, the power system current flows into the voltage source inverter through the transformer. The inverter current, which is determined by the transformation ratio, gives rise to an error voltage that consists of a dead‐time voltage and an impedance voltage. The error voltage is generated even when the reference voltage is zero. This paper describes the mechanism by which the error voltage occurs and proposes a method for reducing the error voltage. © 2013 Wiley Periodicals, Inc. Electr Eng Jpn, 186(3): 85–93, 2014; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.22333     

Fabrication of CaCO3-Coated Vesicles by Biomineralization and Their Application as Carriers of Drug Delivery Systems

We fabricated CaCO₃-coated vesicles as drug carriers that release their cargo under a weakly acidic condition. We designed and synthesized a peptide lipid containing the Val-His-Val-Glu-Val-Ser sequence as the hydrophilic part, and with two palmitoyl groups at the N-terminal as the anchor groups of the lipid bilayer membrane. Vesicles embedded with the peptide lipids were prepared. The CaCO₃ coating of the vesicle surface was performed by the mineralization induced by the embedded peptide lipid. The peptide lipid produced the mineral source, CO₃²⁻, for CaCO₃ mineralization through the hydrolysis of urea. We investigated the structure of the obtained CaCO₃-coated vesicles using transmission electron microscopy (TEM). The vesicles retained the spherical shapes, even in vacuo. Furthermore, the vesicles had inner spaces that acted as the drug cargo, as observed by the TEM tomographic analysis. The thickness of the CaCO₃ shell was estimated as ca. 20 nm. CaCO₃-coated vesicles containing hydrophobic or hydrophilic drugs were prepared, and the drug release properties were examined under various pH conditions. The mineralized CaCO₃ shell of the vesicle surface was dissolved under a weakly acidic condition, pH 6.0, such as in the neighborhood of cancer tissues. The degradation of the CaCO₃ shell induced an effective release of the drugs. Such behavior suggests potential of the CaCO₃-coated vesicles as carriers for cancer therapies.     

Mechano-electrochemistry of a passive surface using an in situ micro-indentation test

Depassivation–repassivation of iron surfaces in boric–borate solutions were investigated by using the micro-indentation test. A pair of current peaks due to repair of the passive film following rupture of the film were observed during a series of indenter drives, i.e., loading and unloading of the indenter. The shape of the current peak depended on environmental conditions (conductivity and pH of the solution) and substrate conditions (mechanical processing history, alloyed element) as well as indentation conditions (repetition, maximum depth, and maximum load). Plastic deformation of the surface was accompanied by surface depassivation, while no depassivation occurred during the elastic deformation, indicating that the passive film on iron has a ductile property. The solution conditions did not affect the scale of depassivation but affected the rate of repassivation. Dislocations in the substrate made surface depassivation difficult but enhanced reactivity during the repassivation. The test also revealed that type-312L stainless steel has high corrosion resistance in a concentrated NaCl solution.     

Effect of gamma radiolysis on pit initiation of zircaloy-2 in water containing sea salt

In spent fuel pools at the Fukushima Daiichi Nuclear Power Station (1F), seawater was injected for cooling purposes after the tsunami disaster in March 2011. It is well known that the chloride in the seawater has the potential to cause localized corrosion (e.g., pitting corrosion) in metals. In this study, we evaluated the pitting potentials of zircaloy-2, the material used in the fuel cladding tubes in 1F, as a function of chloride concentration. To accomplish this, we used artificial seawater under gamma-ray irradiation and investigated the effect of radiolysis on pit initiation of zircaloy-2 in water containing sea salt. Changes in the composition of water containing sea salt were analyzed as well, both before and after gamma-ray irradiation. The characteristics of the resultant oxide films formed on zircaloy-2 were evaluated by X-ray photoelectron spectroscopy and electrochemical impedance spectroscopy. The experimental results showed that the pitting potential under irradiation was slightly higher than that under conditions in which no radiation was present, and that the pitting potential decreased with increasing chloride concentration in the presence as well as the absence of radiation. Solution analyses for water containing sea salt showed that hydrogen peroxide was generated by irradiation. The oxide film was composed of zirconium oxide and was made thicker during the irradiation. The higher pitting potential could thus be explained by the capacity of hydrogen peroxide to oxidize the surface and enhance oxide film formation. Under gamma-ray irradiation, the zircaloy-2 surface with an oxide film formed by radiolysis products was found to be resistant to pitting in the presence of chloride.     

Fabrication of Nonadditive Mica Ceramics by Hot Isostatic Processing

Powder compacts of synthetic mica (fluorphlogopite) encapsulated in a boro–silicate glass tube were isostatically hot–pressed in a Roy–Tuttle–type pressure vessel. Synthetic mica was sintered to a density of 2.60 g/cm³ (91.2% of theoretical density) without additives under 98 MPa of water at 800°C for 45 min.     

Production of Carbon Nanotube by Ethylene Decomposition over Silica-Coated Metal Catalysts

Formation of carbon nanofibers (CNFs) and carbon nanotubes (CNTs) through the decomposition of ethylene at 973 K was achieved using various metal catalysts covered with silica layers. CNFs of various diameters were formed by ethylene decomposition over a Co metal catalyst supported on the outer surface of the silica. In contrast, silica-coated Co catalysts formed CNTs with uniform diameters by ethylene decomposition. Silica-coated Ni/SiO₂ and Pt/carbon black also formed CNTs with uniform diameters, while CNFs and CNTs with various diameters were formed over Ni/SiO₂ and Pt/carbon black without a silica coating. These results indicate that silica layers that envelop metal particles prevent sintering of the metal particles during ethylene decomposition. This results in the preferential formation of CNTs with a uniform diameter.     

Measurement of particle concentration in powder coating process using capacitance computed tomography and wavelet analysis

Capacitance computed tomography techniques were used to visualize particles movement in the draft tube of a spouted fluidized bed for the coating process of drug production. A total of 512 frames images of the particle concentration distribution were obtained at 10-millisecond intervals over a coating time of 5 min using a capacitance computed tomography system. The three-dimensional capacitance CT images (time and two-dimensional space images) were decomposed to wavelet time and space levels to extract the dominant particle distribution feature using three-dimensional discrete wavelet multiresolution at different coating times. As a result, the time and space dominant particle distribution with a specific frequency level can be visualized.