Back‐channel‐etched thin‐film transistor using c‐axis‐aligned crystal In–Ga–Zn oxide

Our crystalline In–Ga–Zn oxide (IGZO) thin film has a c‐axis‐aligned crystal (CAAC) structure and maintains crystallinity even on an amorphous base layer. Although the crystal has c‐axis alignment, its a‐axis and b‐axis have random arrangement; moreover, a clear grain boundary is not observed. We fabricated a back‐channel‐etched thin‐film transistor (TFT) using the CAAC‐IGZO film. Using the CAAC‐IGZO film, more stable TFT characteristics, even with a short channel length, can be obtained, and the instability of the back channel, which is one of the biggest problems of IGZO TFTs, is solved. As a result, we improved the process of manufacturing back‐channel‐etched TFTs.     

Slc25a39 and Slc25a40 Expression in Mice with Bile Duct Ligation or Lipopolysaccharide Treatment

SLC25A39/40, involved in mitochondrial GSH (mGSH) import from the cytoplasm, is essential for protection against oxidative stress and mitochondrial dysfunction. We examined the effects of cholestasis, through bile duct ligation (BDL) and lipopolysaccharide (LPS)-induced inflammation in mice, on Slc25a39/40 expression. Additionally, we used human clear cell renal carcinoma (KMRC-1) cells to elucidate the mechanism of regulation of SLC25A39/40 expression in the kidneys after LPS treatment. BDL resulted in a decrease in Slc25a39 mRNA in the liver and a decrease in Slc25a39/40 mRNA and protein in the kidneys. Consequently, there was a significant decrease in mGSH levels in the kidneys of BDL mice compared with those in sham mice. LPS treatment resulted in increased Slc25a40 expression in the kidneys. In KMRC-1 cells, the combination treatment of LPS-RS or FPS-ZM1 with LPS suppressed the LPS-induced increase in SLC25A40, suggesting that SLC25A40 expression could be regulated by the signaling pathway via toll-like receptor 4 and the receptor for advanced glycation end products, respectively. Our findings contribute to understanding the role of mGSH in the maintenance of the mitochondrial redox state. To the best of our knowledge, this is the first study that demonstrates the changes in Slc25a39/40 expression in mice with cholestasis-associated renal injury and LPS-induced inflammation.     

Generation of pedestal-free 22-fs ultrashort pulse using highly nonlinear fiber and reverse-dispersion fiber

We present an all-fiber system for generating pedestal-free 22-fs ultrashort pulses with a single-peak spectrum. High-power Raman soliton pulses and a normally dispersive highly nonlinear fiber are used to generate a smooth, broadened single-peak spectrum. Then, the higher order dispersion is compensated for using a hybrid fiber composed of a reverse-dispersion fiber and a standard single-mode fiber, which allows pedestal-free ultrashort pulses to be successfully generated. To our knowledge, this is the first demonstration of pedestal-free 20-fs-class ultrashort pulse generation without spectral distortion using an all-fiber configuration.     

Formulation of normalized site attenuation in terms of antennaimpedances [EMI measurement applications]

General formulas for normalized site attenuation (NSA) are derived in terms of antenna impedances by using the two-port circuit theory to show the effects of mutual coupling. The investigations focus on the antenna factors and antenna calibration procedures that are appropriate for NSA, and the validity of the NSA concept is discussed on the basis of these theoretical investigations. The NSA measurements are found to be appropriate for site validation when using broadband antennas having constant antenna factors. It is theoretically concluded, however, that the original concept of the NSA may not be applicable to the use of tuned dipole antennas, even after adopting the correction factors specified in the existing ANSI standard. NSA is shown to require different correction factors if the antennas have changeable antenna factors     

Domain–Specific High–Level Modeling and Synthesis for ATM Switch Prototyping

ATM switch, the core technology of an ATM networking system, is one of the major products in Fujitsu telecommunication business. However, current gate–level design methodology can no longer satisfy its stringent time–to–market requirement. It becomes necessary to exploit high–level methodology to specify and synthesize the design at an abstraction level higher than logic gates. This paper presents our prototyping experience on domain–specific high–level modeling and synthesis for Fujitsu ATM switch design. We propose a high–level design methodology using VHDL, where ATM switch architectural features are considered during behavior modeling, and a high–level synthesis compiler, MEBS, is prototyped to synthesize the behavior model down to a gate–level implementation. Since the specific ATM switch architecture is incorporated into both modeling and synthesis phases, a high–quality design is efficiently derived. The synthesis results shows that given the design constraints, the proposed high–level design methodology can produce a gate–level implementation by MEBS with about 15 percent area reduction in shorter design cycle when compared with manual design.     

Computational cavitation flows at inception and light stages on an axial-flow pump blade and in a cage-guided control valve

Cavitation flows induced around an axial-flow pump blade and inside a high pressure cage-type valve are simu-lated by a two-dimensional unsteady Navier-Stokes analysis with the simplest treatment of bubble dynamics.Thefluid is assumed as a continuum of homogeneous dispersed mixture of water and vapor nuclei.The analysis isaimed to capture transient stages with high amplitude pressure change during the birth and collapse of the bubbleespecially at the stage of cavitation inception.By the pump blade analysis,in which the field pressure is moderate,cavitation number of the inception and locations of developed cavitation are found to agree with experimental re-suits in a wide flow range between high incidence and negative incidence.In the valve flow analysis,in which thewater pressure of 5MPa is reduced to 2MPa,pressure change responding to the bubble collapse between the vaporpressure lower than 1 KPa and the extreme pressure of higher than 10~4 KPa is captured through a stable computa-tion.Location of the inception bubble and pressure force to the valve plug is found agree well with the respectiveexperimental features.     

A multi-port D-R mutator using CCIIs with current followers

A multi-port D-R mutator with new current conveyors (CFCCIIs) as the four-port active element is proposed. Each CFCCII consists of a current follower added to a second-generation current conveyor (CCII). This proposed circuit is a simple configuration using CCIIs, CFCCIIs and grounded capacitances and is applied to higher order high-pass filters. This configuration can realize a superior transmission characteristic, inheriting the characteristic of the conventional LC filter. Since all the passive elements are grounded, the influence of parasitic elements of current conveyors can be reduced with this circuit configuration. As a result, this circuit is considered a suitable configuration for monolithic integration. Results obtained from the SPICE simulations show the realized filters have excellent performance and the circuit is effective.     

Organic–Inorganic Nanohybrids as Novel Thermoelectric Materials: Hybrids of Polyaniline and Bismuth(III) Telluride Nanoparticles

Thermoelectric materials have received much attention recently from the viewpoint of global environmental issues and effective utilization of energy resources. Especially those effective at relatively low temperature, such as below 100°C, which are usually abandoned without use, have become noteworthy recently. From this point of view, organic thermoelectric materials are most attractive, because they could be prepared at low cost and applied in various locations due to their flexibility. We have investigated the thermoelectric properties of organic conducting polymers such as polyaniline, polypyrrole, and polyphenylenevinylene, and succeeded in increasing the thermoelectric performance by selecting dopants, stretching conducting films, etc. Recently we have focused on new systems of organic–inorganic hybrid thermoelectric materials. Herein we present the preparation of a novel system of hybrids of polyaniline and bismuth(III) telluride nanoparticles, starting from bismuth(III) chloride and tetrachlorotellurium by using polyvinylpyrrolidone as a protecting reagent, as well as their thermoelectric properties. The hybrids prepared by this particular method showed much higher thermoelectric performance than the starting organic conducting polymer.     

A Method for Reducing the Dead‐Time Voltage and Impedance Voltage in a Series Voltage Compensator

Many research groups are developing series voltage compensators. In a series converter, since a transformer is used in series in the power system, the power system current flows into the voltage source inverter through the transformer. The inverter current, which is determined by the transformation ratio, gives rise to an error voltage that consists of a dead‐time voltage and an impedance voltage. The error voltage is generated even when the reference voltage is zero. This paper describes the mechanism by which the error voltage occurs and proposes a method for reducing the error voltage. © 2013 Wiley Periodicals, Inc. Electr Eng Jpn, 186(3): 85–93, 2014; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.22333