66/77-kV C-GIS using composite insulation in SF6 gas

A second-generation model of cubicletype gas-insulated switchgear (C-GIS) with composite insulation incorporating SF₆ gas has been developed. The design does not require a gas process in field assembly; it has high reliability and its installation is more rapid; and a further reduction in size is achieved. The design principles are described in detail.     

Theory and characteristics of novel variable reluctance 1X resolver

Although brushless resolvers have been used widely as angular position transducers, they are expensive due to their intricate construction, involving a rotary transformer to supply the exciting coils wound on the rotor poles with the current. It is shown theoretically in this paper that the resolver without rotary transformer or brushes can be realized by simple construction, which consists of the stator core with both 4-poles exciting windings and 2-poles output ones and the rotor core carrying no windings. In this resolver the rotor core has minimum gap at one side and a maximum gap at another side of the diameter. It is characterized by an outer surface form that makes the fluctuation part of gap permeance very in proportion to cos θ, where θ represents the angular position of a point in the air gap with respect to the origin on the rotor, the point of minimum air gap. The method determining the rotor form to embody the aforementioned gap permeance variation is also shown. It has been confirmed not only by simulation but also experiment that the 2-phase output voltages of a model designed based on the theory have sinusoidal waveforms with very small harmonic contents. Moreover, the rotor position detected by processing the output voltages through the conventional resolver/digital converter was within acceptable engineering accuracy.     

Radiation tolerance of type IIa synthetic diamond detector for 14 MeV neutrons

Radiation tolerance of a type IIa synthetic diamond detector was examined from irradiation of mono-energetic 14 MeV neutrons. Measurements of I–V (current–voltage) characteristics and energy spectrum for 5.486 MeV alpha particles were performed after neutron irradiation. In the I–V characteristics measurement, enhancement of rectification was observed after neutron irradiation of up to 2.0 × 10¹² n/cm². Concurrently with the enhancement of rectification, significant decrease in signal amplitude was observed in energy spectrum measurement for alpha particles. It is considered that these changes were due to increase in the concentration of defects acting as shallow energy levels in the forbidden band. For neutron irradiation of higher than 1.6 × 10¹³ n/cm², weakening of the rectification characteristics and recovery of the signal amplitude were observed. These changes imply that deep energy levels, which were also considered to be introduced by defects, were dominant and weakened the effects of the shallow energy levels. Increase in the concentration of the deep trapping levels resulted in gradual decrease of the signal amplitude and degradation in the energy resolution. The peak for the alpha particles was obtained up to 5.5 × 10¹³ n/cm².     

Characteristics of a continuous Si-Ti-C-O fibre with low oxygen content using an organometallic polymer precursor

A continuous Si-Ti-C-O fibre with 12 wt% oxygen content, which is lower than the usual 18 wt% found in the normal fibres, was synthesized by using polytitanocarbosilane which has fewer Si-Si bonds than the usual precursor polymer. The density, tensile strength, tensile modulus and thermal conductivity were found to be 2.37 g cm^–3, 3.4±0.3 GPa, 190±10 GPa and 1.40 W m^–1 K^–1, respectively. Amongst these properties, the tensile modulus was improved by 20 GPa and the thermal conductivity had a higher value in comparison with that of the ordinary Si-Ti-C-O fibre with 18 wt% oxygen content. The Si-Ti-C-O fibre with a 12 wt% oxygen content has a better heat resistance above 1400 °C in an argon atmosphere and 1300 °C in air, than the usual fibre. About 60 and 40% of its tensile strength at room temperature were retained in air at respectively, 1500 and 1600 °C. This improved ceramic fibre is considered to be useful as a reinforcing material for advanced composites such as high-temperature ceramic matrix composites and metal matrix composites.     

Fabrication of blue-light emission fused-silica substrates by using Si-ion implantation and high-temperature annealing

We fabricated fused-silica substrates which emit blue light by using Si-ion implantation and high-temperature annealing. Photoluminescence peak wavelengths are around 400 nm, and the peak intensities can be remarkable after annealing above 1150 °C.     

Late phase II trial of oral etoposide administered for 21 consecutive days in patients with cervical cancer. ETP 21 Study Group--Cervical Cancer Group

We conducted a multi-site late phase II trial of oral etoposide administered for 21 consecutive days in patients with cervical cancer in cooperation with 32 institutes. Fifty mg/body of oral etoposide was administered daily for 21 consecutive days. Treatment cycles were to be repeated at 4- to 5-week intervals. Eighty patients were enrolled and 70 patients were evaluated. The overall response rate (95% CI), including one complete response patient and 18 partial response patients, was 27.1% (19/70). The most commonly observed toxicity was myelosuppression such as leukopenia, neutropenia, hemoglobin decrease and thrombocytopenia. Other adverse effects were gastrointestinal toxicities such as anorexia, nausea, stomatitis and vomiting, as well as fatigue and alopecia. These adverse effects were well tolerated and controlled with medications. From these results we concluded oral etoposide administered for 21 consecutive days was an effective drug against cervical cancer.     

Ectopic expression of DAN enhances the retinoic acid-induced neuronal differentiation in human neuroblastoma cell lines

Retinoic acid (RA) plays a major role in neuronal cell differentiation. Neuroblastoma cells differentiate in vitro by extending neurites and forming ganglion-like aggregates in response to RA. In the present study, we have examined a biological role(s) of DAN in the regulation of RA-mediated cellular differentiation in neuroblastoma cells. RTBM1 and SH-SY5Y cells undergo marked morphological changes associated with a remarkable induction of DAN gene expression when exposed to RA. By transfecting an expression vector harboring a rat DAN cDNA into SH-SY5Y cells, we have obtained two independent transfectants which express a large amount of DAN. The forced expression of DAN gene enhanced the neurite extension in the presence of RA, suggesting that DAN gene product might contain some regulatory role(s) in the RA-induced cellular differentiation in neuroblastoma cells.     

Isolation and characterization of a novel 5-oxoprolinase (without ATP-hydrolyzing) from Alcaligenes faecalis N-38A

A screening test was undertaken to isolate a microorganism that produced 5-oxoprolinase (without ATP-hydrolyzing). The 5-oxoprolinase (without ATP-hydrolyzing) activity (decyclization activity toward L-pyroglutamate) was found in a cell-free extract of Alcaligenes faecalis N-38A, newly isolated from a soil sample. The enzyme was purified as a homogeneous preparation. The molecular weight of the enzyme was estimated to be 47,000. The decyclization activity was specific for L-pyroglutamate, and independent of ATP and metal ions. The reaction was a reversible one, i.e., cyclization reaction of L-glutamate to yield pyroglutamate was identified.     

Coexistence of proguanylin (1-15) and somatostatin in the gastrointestinal tract

In order to identify proguanylin-secreting cells, we have raised an antiserum against the synthetic fragment of human proguanylin (1-15) and have examined the proguanylin-positive cells in the human and rat gastrointestinal tract by immunohistochemical methods. Numerous proguanylin (1-15)-immunoreactive cells were found in the gastrointestinal tract. They were either pyramidal or spindle shaped in the stomach. Spindle-shaped cells, frequently possessing long slender processes, were located at the base of the pyloric epithelium and did not extend to the lumen. In the duodenum and jejunum, these cells were mostly pyramidal in shape and often had a slender process towards the lumen. The immunostaining was completely blocked by the human proguanylin (1-15) fragment. Paneth and goblet cells were negative against this antiserum. The number of serotonin-positive cells was much larger than that of proguanylin-positive cells in all the segments tested. The number of proguanylin-positive cells decreased from the jejunum to the ileum and very few cells were observed in the colon. In contrast to serotonin-positive cells, most somatostatin-positive cells were also positive for proguanylin. Thus, proguanylin (1-15) or its related protein appears to coexist with somatostatin in intestinal endocrine D cells which may be a source of circulating proguanylin. Proguanylin, like somatostatin, may also regulate intestinal function as a local regulator.     

Laser-Sintered Barium Titanate

Laser sintering of alkoxy-derived ultrafine BaTiO₃ powders was investigated. The temperature increases of the sample with laser irradiation were measured with a thermocouple. It was found that laser irradiation could generate enough heat to sinter ceramics. A slurry was prepared by mixing an alkoxy-derived BaTiO₃ powder, binder additives, solvent, and plasticizer. The slurry was tape cast and dried to give a green sheet. The green sheet was laser sintered and was then characterized by SEM, XRD, and density measurements. The effect of burnout before laser irradiation and the characteristic microstructure of laser-sintered BaTiO₃ are described.