Fusion and molecular aspects of liposomal nanocarriers incorporated with isoprenoids

The present study was conducted to investigate whether typical isoprenyl compounds (TICs) can control liposomal fusion reactions through changes in the physical properties of membranes. The fusion capabilities of TIC-incorporated liposomes were characterized by measuring the 13C spin-lattice relaxation times (13CT1) and the gel permeation chromatogram (GPC) patterns. The 13CT1 relaxivities of some of these TIC-liposomes were remarkably enhanced at 27 degrees C. The highest 13CT1 value obtained was for the beta-carotene-liposome, which ruptured, and was attributed to the highest membrane fusion reactivity. The other TIC-liposomes incorporated with alpha-tocopherol, canthaxanthin, or coenzyme Q10 also induced significant fusion and did not rupture in comparison with the beta-carotene-liposome. These results show that the incorporations of TICs into lipid bilayers are useful to control liposomal nanocarriers for suitable membrane packing and advantageous phase separation, which could affect membrane-related processes.     

Stress intensity factor analysis of a three-dimensional interface crack between dissimilar anisotropic materials

A new numerical method to calculate the stress intensity factors (SIFs) of a three-dimensional interface crack between dissimilar anisotropic materials was developed. In this study, the M-integral method was employed for mode separation of the SIFs. The moving least-square method was utilized to calculate the M-integral. Using the M-integral with the moving least-square method, SIFs can be automatically calculated with only the nodal displacements from the finite element method (FEM). Here, SIFs analyses of some typical three-dimensional problems are demonstrated. Excellent agreement was achieved between the numerical results obtained by the present method and the corresponding results proposed by other researchers. In addition, the SIFs of a single-edge crack, a through crack, and a semi-circular crack between two anisotropic solids in three-dimensional structures were analyzed.     

Carbon Nitride Loaded with an Ultrafine,Monodisperse, Metallic Platinum-Cluster Cocatalyst for the Photocatalytic Hydrogen-Evolution Reaction

For the realization of a next-generation energy society, further improvement in the activity of water-splitting photocatalysts is essential. Platinum (Pt) is predicted to be the most effective cocatalyst for hydrogen evolution from water. However, when the number of active sites is increased by decreasing the particle size, the Pt cocatalyst is easily oxidized and thereby loses its activity. In this study, a method to load ultrafine, monodisperse, metallic Pt nanoclusters (NCs) on graphitic carbon nitride is developed, which is a promising visible-light-driven photocatalyst. In this photocatalyst, a part of the surface of the Pt NCs is protected by sulfur atoms, preventing oxidation. Consequently, the hydrogen-evolution activity per loading weight of Pt cocatalyst is significantly improved, 53 times, compared with that of a Pt-cocatalyst loaded photocatalyst by the conventional method. The developed method is also effective to enhance the overall water-splitting activity of other advanced photocatalysts such as SrTiO₃ and BaLa₄Ti₄O₁₅.     

Detailed Analysis of Temperature Characteristics of an InGaP/InGaAs/Ge Triple-Junction Solar Cell

Temperature characteristics of an InGaP/InGaAs/Ge triple-junction solar cell were analyzed in detail using an equivalent circuit calculation. The current–voltage (I–V) characteristics of single-junction solar cells (InGaP, InGaAs, Ge solar cells) were measured at various temperatures. Fitting of I–V curves between measured and calculated data was carried out, and the diode parameters and temperature exponents of the single-junction solar cells were extracted. The parameters for each single-junction solar cell were used in the equivalent circuit model for the triple-junction solar cell, and calculations of solar cell performance were carried out. Measured and calculated results of the I–V characteristics at various temperatures agreed well.     

L-Ergothioneine scavenges superoxide and singlet oxygen and suppresses TNF-α and MMP-1 expression in UV-irradiated human dermal fibroblasts

The hair lipid composition collected from 44 Japanese females between 1 and 81 years of age was examined for eight lipids including hydrocarbons (HCs), squalene (SQ), wax esters (WEs), triglycerides (TGs), fatty acids (FAs), cholesterol (CH), ceramides (CERs), and 18-methyl eicosanoic acid (MEA). In this study, the 5-cm length from the proximal root end of hair fibers, which had never been exposed to any chemical treatment, was used after 5-min incubation with hexane following shampooing. Hair lipids were extracted with solvent and subsequent alkali-solvent and were then analyzed by a combination of chromatography. Although the average contents of the lipids showed great fluctuations among individuals, there were significant correlations between the levels of each lipid, which allowed for the classification of the hair lipids into four groups: group A: SQ, WEs, TGs, and FAs (designated as endogenous lipids based upon their sebum origin); group B: CH and CERs (designated as endogenous lipids); group C: HC (unknown origin); and group D: MEA (the other endogenous lipid). A principal component analysis for eight lipids revealed that the hair lipid composition was characterized by a predominant negative correlation between each lipid for groups A and B. This negative correlation suggests that the endogenous lipids in group B serve as a barrier against the penetration of predominantly sebum-derived exogenous lipids (group A). Endogenous lipids consisting of CH and CERs (group B) and MEA (group D) should be designated as intrinsic internal lipids of human hair.     

Effect of concurrent use of ondansetron hydrochloride and dexamethasone against nausea and vomiting in lung cancer patients receiving cisplatin

We examined the efficacy of concurrent use of ondansetron hydrochloride and dexamethasone, and the effective dose of dexamethasone against nausea and vomiting in lung cancer patients receiving chemotherapy including single high dose cisplatin. The study was carried out on total of 44 courses of chemotherapy in either initial onset or recurrence of lung cancer. The patients were given 4 mg of ondansetron injection on the day of cisplatin injection (Day 1), and 4 mg/day of ondansetron tablet for Days 2 to 4. These patients were randomly allocated into 2 groups, i.e., those who, on Day 2, concomitantly received 10 mg of dexamethasone (D10 Group, 22 courses) or 20 mg (D20 Group, 22 courses), for comparing the antiemetic effects in a different concomitant dose of dexamethasone. An efficacy rate of 70% or more was achieved in each group for acute emesis on Day 1. The efficacy rate was 80% or above for emesis on Day 2 when dexamethasone was concurrently administered, and Days 3 and 4 in both groups. No significant difference was observed between the groups. A higher complete suppression rate against nausea was seen in D20 Group even though the difference from D10 Group was not significant. Furthermore, food intake rate on Day 2 was significantly better in D20 Group. However, in the cases that were graded effective or markedly effective for acute emesis on Day 1, the efficacy rate was also high in both groups through Days 2-4. It was notable that the efficacy rate of Days 2-4 was 100% in D2 Group. The high efficacy rate was shown in male patients regardless of which dose of dexamethasone was used. However, control of emesis was unfavorable in female patients on Day 1 and was still unfavorable even though dexamethasone was combined from Day 2. We considered from the above results that 10 mg/day of concurrent dexamethasone is sufficient in suppression of delayed emesis on Day 2. However, in order to improve nausea or food intake, or to suppress emesis in patients who are highly likely to show unfavorable control for Day 2 and onward, 20 mg/day should also be effective.     

Inhibition in a microgravity environment of the recovery of Escherichia coli cells damaged by heavy ion beams during the NASDA ISS phase I program of NASA Shuttle/Mir mission no. 6

OBJECTIVE: To explore whether there are different disease patterns of rheumatoid arthritis (RA) in women and men. METHODS: We studied 55 male case patients and 110 female control patients who developed RA between 1970 and 1985 and who resided and received medical care in Olmsted County, Minnesota, for at least 10 years after the diagnosis of RA. Case and control patients were matched for the date of first diagnosis. The pattern and extent of joint involvement, the frequency of joint surgeries, and the presence and type of extraarticular manifestations were determined by retrospective chart review. RESULTS: Incidence rates in women were variable and age dependent, whereas the risk in men older than 36 years was constant over their lifetime. Erosive disease was more frequent in men than in women (72% versus 55%, respectively; P < 0.05) and tended to occur earlier (47% versus 31% for erosive disease within the first 4 years of RA). Although male sex was correlated with a higher risk of bony erosions and an accelerated course of RA, structural consequences of joint destruction were more pronounced in women. Joint surgery was performed more frequently in women (50%) than in men (27%) (P = 0.01). In particular, the frequencies of arthroplasties and arthrodeses of hand and foot joints were different (34 procedures in women versus 1 procedure in men; P < 0.001). Sex influenced the risk as well as the pattern of organ involvement in RA. Nodules and rheumatoid lung disease were typical manifestations in men (P = 0.001 and P < 0.001, respectively), whereas women typically developed sicca syndrome (P = 0.05). Despite differences in disease aggressiveness and disease pattern, there was little difference in the medical therapy in the men compared with the women. CONCLUSION: RA is a heterogeneous disease with variations in phenotype. Sex-associated factors influence disease severity as well as disease pattern. Because sex-related effects influence treatment goals, treatment responses, and side effects, they should be considered in clinical study design and analysis as well as in the treatment decisions for individual patients with RA.     

Non-enzymatic, template-directed ligation of 2'-5' oligoribonucleotides. Joining of a template and a ligator strand

Decauridylate containing exclusively a 2'-5' phospho-diester bond ([2'-5']U10) served as a template for the synthesis of oligoadenylates [oligo(A)s] from the 5'-phosphorimidazolide of 2'-5' diadenylate (ImpA-2'p5'A). Joining of [2'-5']U10and ImpA2'p5'A also took place in substantial amounts to yield long-chain oligoribonucleotides in the template-directed reaction. An unusual CD spectrum ascribed to helix formation between [2'-5']U10and [2'-5'](pA)2was observed under the same conditions as that of the template-directed reaction. The 3'-5' linked decauridylate ([3'-5']U10) also promoted the template-directed synthesis of oligo(A)s from ImpA2'p5'A, but more slowly compared with [2'-5']U10. The results indicate that short-chain RNA oligomers with a 2'-5' phosphodiester bond could lead to longer oligoribonucleotides by template-directed chain elongation.     

Ultra-high-precision time control system over any long time delay for laser pump and synchrotron x-ray probe experiment

An ultra-high-precision clock system for long time delay has been developed for picosecond time-resolved x-ray diffraction measurements using synchrotron radiation (SR) pulses and synchronized femtosecond laser pulses. The time delay control between pump laser pulse and the probe SR pulse was achieved by combining an in-phase quadrature modulator and a synchronous counter. This method allowed us to change the delay time by a nearly infinite amount while maintaining the precision of +/-8.40 ps. Time-resolved diffraction measurements using the delay control system were demonstrated for precise measurement of an acoustic velocity in a single crystal of gallium arsenide.     

The relationship between acoustic emission signals and cutting phenomena in turning process

The development of intelligent manufacturing by using machine tools is advancing in leaps and bounds. To maintain accuracy in machining and in the interests of fail-safe operation, monitoring of the cutting state or the final machining is very important. Acoustic emissions (AE) comprise elastic stress waves produced as a result of the deformation and fracture of materials. By measuring the AE generated during a turning process, it is possible to estimate the state of the machining operation. The correlation between cutting phenomena and AE in a turning process was examined experimentally by using a steel workpiece and a cermet tool in a numerically controlled turning process. The process of formation of chips, the types of chip, and the shear angle all markedly affected the AE signals. There was a strong negative correlation between the shear angle and the AE signal level. Similar results were obtained for various feed rates and for workpieces of various degrees of hardness. Correlations related to surface roughness and to tool wear are also described that permit the evaluation of the state of the turning process.