Living cationic polymerization of isobutyl vinyl ether by the diphenyl phosphate/zinc iodide initiating system

Summary The first example of the living cationic polymerization of isobutyl vinyl ether via the phosphate counteranion has been achieved in toluene below 0°C with a new initiating system that consists of diphenyl phosphate and zinc iodide, (C₆H₅0)₂P(0)0H/ZnI₂. The number-average molecular weight of the polymers increased in direct proportion to monomer conversion, and was in excellent agreement with the calculated value assuming that one polymer chain forms per unit diphenyl phosphate. On addition of a fresh feed of monomer at the end of the polymerization, the added feed was smoothly polymerized at nearly the same rate as in the first stage, and the polymer molecular weight further increased in direct proportion to monomer conversion. Throughout the reaction, the molecular weight distribution of the polymers stayed very narrow (¯M/¯M_n 1.1). At room temperature (+25 °C), however, the molecular weight distribution of the polymers slightly broadened (¯M_w/¯M_n 1.2) at high conversions where the polymer molecular weight became smaller than the calculated value. Evidently, the (C₆H₅0)₂-P(0)0H/ZnI₂ system indeed generates a propagating species of a long life-time at room temperature, but the perfectly living polymerization by this system operates below 0°C.Living cationic polymerization of vinyl ethers by electrophile     

Characteristic properties of cutting fluid additives derived from the adducts of diamines and acid chlorides

A number of N,N′-diacylalkyldiamines were prepared from the reaction of acid chlorides with 1,8-diaminooctane and 1,12-diaminododecane and screened for anti-rust properties and antimicrobial activity in spent coolants of water-based cutting fluids. Aqueous solutions of N,N′-dihexanoyl-1,8-diaminooctane and N,N′-isobutyroyl-1,12-diaminododecane showed good anti-rust properties for water-based cutting fluids. Aqueous emulsions of N,N′-dibutyroyl-, dipentanoyl-, dihexanoyl- and dioctanoyl-1,12-diaminododecane showed good lubricities and antimicrobial activity for water-based cutting fluids.     

Synthesis of Ba2NaNb5O15 Powders and Thin Films Using Metal Alkoxides

Transparent and highly oriented Ba₂NaNb₅O₁₅ (BNN) thin films have been prepared by using metal alkoxides. A homogeneous precursor solution was prepared by the controlled reaction of NaOC₂H₅, Nb(OC₂H₅)₅, and barium metal. The BNN precursor included a molecular-level mixture of NaNb(OC₂H₅)₆ and Ba[Nb(OC₂H₅)₆]₂ in ethanol. The alkoxy-derived powder crystallized to a low-temperature phase, and then transformed to orthorhombic BNN (tungsten bronze) at 600°C. BNN precursor films on substrates crystallized to orthorhombic BNN at 800°C via the low-temperature phase. Highly (002) oriented BNN films of tungsten bronze structure were successfully prepared on MgO (100) substrates at 700°C by using BNN underlayer.     

Synthesis and Magneto-mechanical Properties of Ce-TZP/La M-Type Hexaferrite Composite

An in situ composite composed of ceria-stabilized tetragonal zirconia polycrystals (Ce-TZP) and La{Co_0.5Fe_0.5(Fe_0.9Al_0.1)₁₁}O₁₉ was synthesized from a powder mixture of Ce-TZP, La(Fe_0.9Al_0.1)O₃, Fe₂O₃, Al₂O₃, and CoO. The dense Ce-TZP dispersed with platelike La{Co_0.5Fe_0.5(Fe_0.9Al_0.1)₁₁}O₁₉ crystals as a second phase were formed after sintering from 1250° to 1350°C. The saturation magnetization of the in situ composite Ce-TZP/La{Co_0.5Fe_0.5(Fe_0.9Al_0.1)₁₁}O₁₉ was proportional to the mass fraction of the hexaferrite second phase in Ce-TZP. The coercivity of the composite with a 20 mass% of second phase decreased from 9.14 to 2.52 kOe (from 728 to 201 kA/m) after the pulverization of the composite. The susceptibility (χ) increased by 15%–25% under uniaxial stress on the composite. The change of the susceptibility (Δχ/χ) value increased with decreasing the mass fraction of the second phase in the composite. The Δχ was found to increase linearly with applied stress and abruptly change on cracking, which is expected for the application in fracture sensing of the composite.     

Free energy perturbation study on a Trp-binding mutant (Ser88 ->Cys) of the trp-repressor

The Ser⁸⁸Cys mutant of the trp-repressor showed a lower affinityfor the corepressor than the wild-type repressor [G = 1.7 ±0.3 kcal/mol, Chou and Matthews (1989) J. Biol. Chem., 264,18314–18319].A molecular dynamics/free energy cycle perturbation study wasperformed to understand the origin of the decreased affinity.A value (G = 1.58 ± 0.28 kcal/mol) comparable with theexperimental value was obtained by the simulation. Free energycomponent analysis revealed that destabilization of the vander Waals interaction between Ser⁸⁸ and Trp¹⁰⁹ (corepressor)mainly contributed to the decreased affinity of the mutant.The rotational transition of the hydroxyl (sulfhydryl) groupof Ser⁸⁸ (Cys⁸⁸) during the simulations affected the contributionsof Arg⁸⁴ and water to the free energy change in the aporepressorand those of Arg⁸⁴ and Trp ¹⁰⁹ to that in the holorepressor.However, the contributions from different residues compensatedeach other, and the total free energy changes were almost invariablein the various simulations.     

Preparation of plasma-polymerized membranes from I-(trimethylsilyl)-I-propyne and gas permeability through the membranes

Summary Plasma-polymerized membranes for gas separation were prepared from 1-(trimethylsilyl)-1-propyne. The permeation data of He, H₂ 0₂, N₂, CO₂, and CH₄ through the membranes showed plasma-polymerized 1-(trimethylsilyl)-1-propyne had high permselectivity but low permeability compared with poly[l-(trimethylsilyl)-1-propyne]. This behavior is considered to be due to the crosslinking structure of the plasma-polymerized membrane. The correlation between plasma polymerization conditions and the membrane performance was studied. The optimum condition at which the deposition rate of the plasma polymer is maximized agreed with the optimum value to yield maximum separation factor of gases through the membrane.     

Reaction of sodium perborate with a chlorinated cyclic hindered amine (TMP-Cl): I. Quantitative evaluation of active oxygen species in fabric bleaching

The reaction of N-chloro-4-hydroxy-2,2,6,6-tetramethylpiperidine (TMP-Cl) with sodium perborate (PB) was investigated with special reference to the generation of singlet oxygen and the possible application to a new oxidative bleaching process. Generation of the singlet oxygen (¹O₂), the hydroxyl radical (HO·) and superoxide anion radical (O₂·⁻) in the PB/TMP-Cl mixed solution was confirmed by the trapping reagent method. From the results of another experiment, in which the bleaching abilities of each active oxygen species were confirmed, the main active oxygen species contributing to the bleaching of purpurogallin, the skeleton of black tea pigment, in the PB/TMP-Cl system was concluded to be¹O₂.     

Hydrogen absorption characteristics of Pd1−xLix (x = 0.055 and 0.072) alloys and ordered Pd7Li

Thermodynamic quantities were determined for the absorption of hydrogen in Pd-5.5at.%Li and Pd-7.2at.%Li alloys, the latter alloy being in the two-phase field of saturated -Pd(Li,s) solid solution and the ordered Pd₇Li phase. Data were also determined for the Pd-10.6at.%Li alloy which consists only of the ordered Pd₇Li phase. The data were determined from measurements of pressure-composition isotherms at temperatures between 273 K and 463 K and hydrogen pressures up to 1000 Torr. The Pd---Li alloys dissolve considerable amounts of hydrogen and form a more stable hydride phase than Pd despite the lattice contraction which occurs on alloying Pd with Li. The hydrogen solubility in the ordered Pd₇Li phase alone is a little smaller than that in the two-phase mixture. The large hydrogen absorption of Pd---Li alloys, which does not depend on the presence of ordered Pd₇Li, may be attributed to (i) an attractive H---Li pair interaction, (ii) a decrease in the strain energies necessary for hydrogen occupation of the interstices, because of the similar lattice parameters of the -Pd(Li,s) and ordered Pd₇Li phases, and the large compressibility of Pd---Li alloys, and (iii) the valence of 1 of Li in Pd compared with 3 for, for example, Y in Pd.     

Preparation and structural characterization of perovskite-type LaxLn1−x″CoO3 by the thermal decomposition of heteronuclear complexes, LaxLn1−x″| Co(CN)6| · nH2O (Ln″ = Sm and Ho)

Perovskite-type La_xLn_1−x″CoO₃ oxides are prepared by the thermal decomposition of La_xLn_1−x″ [Co(CN)₆] · nH₂O hetero-nuclear complexes. Except for LaCoO₃ (hexagonal), the structures observed for La_xSm_1−xCoO₃ are othorhombic. While the perovskite-type oxide HoCoO₃ is not formed by decomposition at 1000°C of the corresponding hexacyano complex, the partial replacing of Ho with La is effective in forming the pervoskite-type oxide having an orthorhombic structure containing Ho even at 800°C. A monotonous correlation (quasi-linear relationship) was found between the b- and c-lattice constants of the orthorhombic structures of the perovskite-type oxides and the effective radii of Ln ions, defined as r_eff = xr_1.a + (1 − x)r_1.0″. The distortion parameter for the orthorhombie cell (3″a/b−1) increaseswith decrease in r_eff and is expected to be 0.270 for perovskite-type HoCoO₃. The crystal structure of the La_xLn_1−x″, CoO₃ oxides is mainly controlled by the effective radii of Ln ions.