Dependence of tunneling current through a single molecule of phenylene oligomers on the molecular length

The electrical properties of single phenylene oligomers were studied in terms of the dependence of the tunneling current on the length of the oligomers using self-assembling techniques and scanning tunneling microscopy (STM). It is important to isolate single molecules in an insulating matrix for the measurement of the conductivity of the single molecule. We demonstrate here a novel self-assembled monolayer (SAM) matrix appropriate for isolation of the single molecules. A bicyclo[2.2.2]octane derivative was used for a SAM matrix, in which the single molecules were inserted at molecular lattice defects. The isolated single molecules of phenylene oligomers inserted in the SAM matrix were observed as protrusions in STM topography using a constant current mode. We measured the topographic heights of the molecular protrusions using STM and estimated the decay constant, beta, of the tunneling current through the single phenylene oligomers using a bilayer tunnel junction model.     

Monitoring behaviour of catabolic genes and change of microbial community structures in seawater microcosms during aromatic compound degradation

The behaviour of microbial populations responsible for degradation of the aromatic compounds, phenol, benzoate, and salicylate, and changes of microbial community structures in seawater microcosms were analysed quantitatively and qualitatively using MPN–PCR and PCR–DGGE. The purpose of the study was to investigate the ecology of the entire microbial community during bioremediation. Bacterial populations possessing catechol 1,2-dioxygenase (C12O) DNA were evidently the primary degraders of phenol and benzoate, but others possessing catechol 2,3-dioxygenase (C23O) DNA increased to enhance substrate degradation under high-load conditions when the substrates were present for long periods. However, salicylate degradation was evidently facilitated by specific bacterial populations possessing C23O DNA. PCR–DGGE analyses suggested that bacterial populations already relatively dominant in the original microcosm contributed to phenol degradation. Bacteria composing a minor fraction of the original population apparently increased and contributed to benzoate degradation. Bacterial populations possessing C23O DNA were responsible for salicylate degradation, however, and different degrading bacteria were evidently selected for, depending on the initial salicylate concentration. Microbial community structure tended to be simplified by aromatic compound degradation. Thus, microbial monitoring can elucidate the behaviour of bacterial populations responsible for aromatic compound degradation and be used to assess the effects of bioremediation on intact microbial ecosystems.     

Robust Eigenvector Algorithms for Blind Deconvolution of MIMO Linear Systems

This paper presents eigenvector algorithms (EVAs) for blind deconvolution of multiple-input, multiple-output infinite impulse response channels (convolutive mixtures). An attractive feature of one of the proposed EVAs is that it is insensitive to Gaussian noises which are added to the outputs of the channels; hence, the proposed EVA is referred to as a "robust" eigenvector algorithm. Simulation results show the validity of the proposed EVAs.     

Electrical switching of the vortex core in a magnetic disk

A magnetic vortex is a curling magnetic structure realized in a ferromagnetic disk, which is a promising candidate for a memory cell for future non-volatile data-storage devices. Thus, an understanding of the stability and dynamical behaviour of the magnetic vortex is a major requirement for developing magnetic data-storage technology. Since the publication of experimental proof for the existence of a nanometre-scale core with out-of-plane magnetization in a magnetic vortex, the dynamics of vortices have been investigated intensively. However, a way to electrically control the core magnetization, which is a key for constructing a vortex-core memory, has been lacking. Here, we demonstrate the electrical switching of the core magnetization by using the current-driven resonant dynamics of the vortex; the core switching is triggered by a strong dynamic field that is produced locally by a rotational core motion at a high speed of several hundred metres per second. Efficient switching of the vortex core without magnetic-field application is achieved owing to resonance. This opens up the potentiality of a simple magnetic disk as a building block for spintronic devices such as a memory cell where the bit data is stored as the direction of the nanometre-scale core magnetization.     

Curing of epoxy resin by ultrafine silica modified by grafting of hyperbranched polyamidoamine using dendrimer synthesis methodology

Hyperbranched polyamidoamine–grafted silica was prepared according to dendrimer synthesis methodology. The modified silica was dispersed uniformly in epoxy resin, and the curing of epoxy resin proceeded successfully by heating in the presence of the modified silica; the gel fraction of the epoxy resin cured by the hyperbranched polyamidoamine–grafted silica (grafting = 80.2%) reached 77% at 170°C after 48 h. The gel fraction increased with increasing terminal amino group content of the hyperbranched polyamidoamine–grafted silica. In addition, the curing ability of the silica increased by complexation of the terminal amino groups of the grafted polyamidoamine with boron trifluoride. The modulus of elasticity of the curing materials obtained using the modified silica as a curing agent was lower than that using conventional a curing agent such as ethylenediamine in the presence of untreated silica. On the other hand, the heat resistance of the curing product using the modified silica was superior to that using ethylenediamine, but no difference in glass‐transition temperature was observed. It is expected that hyperbranched polyamidoamine grafted‐silica is incorporated uniformly with chemical bonds in the matrix of the epoxy resin. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 573–579, 2001     

Improvement in mechanical properties of poly(p‐phenylene sulfide) fibers by high‐tension multiannealing method

High‐tension multiannealing (HTMA) was applied to improve the tensile properties of poly(p‐phenylene sulfide) fibers, which was furthermore applied to the fibers produced and improved with the zone‐drawing and zone‐annealing treatments. The HTMA treatment was repeatedly applied to the fibers under the conditions of a 250°C temperature and an applied tension of between 201.0 and 188.0 MPa. As a result, at the 13th treatment the degree of crystallinity increased to 40%. On the other hand, the orientation factor of crystallites increased dramatically to 0.982 during the zone‐drawing treatment, but increased only slightly during the subsequent treatments of zone annealing and HTMA. The finally obtained fiber had a tensile modulus of 10.4 GPa and a tensile strength of 0.73 GPa. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 75: 1569–1576, 2000     

A computer-aided design of EMC microstrip dipole arrays using nonlinear optimization techniques

This paper describes a method for designing electromagnetically coupled (EMC) printed dipole arrays. The advantages of EMC dipoles include greater bandwidth, higher efficiency, and an easier match to the feed lines, when compared to classically fed printed antennae. The excitation mechanism is provided by a strip transmission line embedded inside the substrate which couples energy parasitically to the microstrip antenna. Electromagnetically coupled microstrip dipoles have been investigated by empirical or approximate analysis techniques. As a result an approximate model has been derived for microstrip dipoles. The method is based on the method of moments solution to an integral equation derived from the approximate Green function for a grounded dielectric slab. The element lengths and offsets and the stub length of the EMC dipole array are determined by the direct search optimization method of Hooke and Jeeves. To show the feasibility of the proposed method, a mathematical formulation and numerical results are presented for Chebyshev arrays. © 1998 Scripta Technica, Electr Eng Jpn, 125(4): 60–66, 1998     

Accumulation of Misfolded Protein Aggregates Leads to the Formation of Russell Body-like Dilated Endoplasmic Reticulum in Yeast

RNAP-I, an aspartic proteinase from a filamentous fungus Rhizopus niveus, is secreted very efficiently in Saccharomyces cerevisiae. It is synthesized first as a precursor form with signal sequence and prosequence in its amino-terminus. Our previous study indicated that the prosequence of RNAP-I had important roles in its correct folding and secretion in yeast, and that a prosequence-deleted derivative of RNAP-I, Δpro, was not secreted but was retained and degraded in the yeast endoplasmic reticulum (ER). In the present study, we show that the accumulation of Δpro in the yeast ER caused elevated synthesis of ER resident chaperones, indicating that Δpro is recognized as an unfolded protein species in the ER. Our biochemical data demonstrated that Δpro formed aggregates which contained BiP, but not protein disulfide isomerase (PDI), in the ER. Immunoelectron microscopical analysis revealed that the Δpro aggregates were indeed visible as electron-dense regions in the ER and nuclear envelope. Such ‘chaperone-associated misfolded protein bodies’ were observed for the first time in yeast. Morphologies of the ER and nucleus were drastically altered by the accumulation of the Δpro aggregates. The ER lost its flat cisternal shape; the ER lumen extended aberrantly and the ER membrane irregularly proliferated. The misfolded Δpro proteins are probably sorted from the ordinary ER lumen to form the aggregates so that the ER function would not be grossly impaired, and the dilated ER may represent an ER subcompartment where the Δpro aggregates are degraded. © 1997 by John Wiley & Sons, Ltd.     

Differentiation of molecules in a mixed self-assembled monolayer of H-and Cl-terminated bicyclo[2.2.2]octane derivatives

H-?and Cl-terminal groups of bicyclo[2.2.2]octane (BCO) derivatives in a mixed self-assembled monolayer (SAM) on Au(111) were imaged using a modified Si tip with a CaF(2) nanocluster to differentiate the two terminals, which have different electronegativities. In order to achieve this we fabricated a new sample holder, on which a CaF(2) single crystal and the mixed SAM on Au(111) could be mounted side by side. We transferred the holder with the two samples into a ultrahigh vacuum (UHV) atomic force microscopy (AFM) chamber. Upon cleaving the CaF(2) single crystal under UHV, a fresh and clean CaF(2)(111) surface parallel with the SAM surface appeared within 2?mm of the separation. The modified Si tip was prepared by repeatedly making contact between a Si tip and the CaF(2)(111) surface. The resulting modified tip could image the atomic periodicity of a Ca(2+) and an F(-) sublattice on the CaF(2)(111) surface depending on the sign of the tip-terminating ion, i.e.?an F(-) and a Ca(2+) ion, respectively, as reported previously (Foster et al 2002 Phys.?Rev.?B 66 235417). Using the modified Si tip with the known tip-terminating ion, we observed the Cl-terminal in the surrounding H-terminals in the mixed SAM by noncontact (NC) AFM. Here, the Cl-terminal is negatively charged due to its electronegativity and thus the BCO moiety with the Cl-terminal is terminated by a C(δ+)-Cl(δ-) permanent dipole, while the H-terminal is almost neutral. The Cl-terminal appeared brighter (more attractive) and darker (more repulsive) than the surrounding H-terminals in NC-AFM images depending on the sign of the tip-terminating ion, i.e.?a Ca(2+) and an F(-) on the modified tip, respectively, although the relationship between the image contrast and the sign of the tip-terminating ion was not always perfect because of the instability of the tip-terminating ion on the nanocluster. The present method can be used to distinguish terminal groups with different electronegativities.     

Transport of human immunoglobulin G and Fc-fusion proteins to chicken egg yolk

We examined the transport of human immunoglobulin G (IgG) subclasses and fusion proteins with the Fc region of human IgG to the egg yolk, after the proteins were injected into a vein of hens. Human IgGs were efficiently transported and accumulated into the yolk, whereas the proteins were not detected in the egg white. Among human IgG subclasses, IgG2 was transported most efficiently. Fc-fusion proteins injected were also transported into the yolk. A fusion protein with the Fc region derived from human IgG2 was more efficiently transported into the yolk than the counterpart fusion with the Fc region from human IgG1. This study shows that the recovery of recombinant antibodies and Fc-fusion proteins from the yolk is an effective method in transgenic chicken bioreactors.