Bacteriophages isolated from activated sludge processes and their polyvalency

In this study, bacteriophages were isolated from activated sludge and their host range was studied. Bacterial isolates were obtained from an activated sludge process treating urban sewage, and bacteriophages were obtained by plaque assay using the bacterial isolates obtained in this study as the host. Out of 15 bacteria isolated, 9 supported plaque formation. The host range test was conducted with a combination of 8 bacteriophage isolates and 9 bacterial isolates. All of the 8 bacteriophages tested were found to form plaques on more than 1 host, and 4 of them formed plaques on both gram-positive and gram-negative bacterial isolates. Three of the 8 bacteriophages failed to form plaques on their original bacterial host. The experimental result indicates that bacteriophages are an active part of the activated sludge microbial ecosystem, having a very close ecological relationship with their host bacteria.     

The design of cyclic AMP--recognizing oligopeptides and evaluation of its capability for cyclic AMP recognition using an electrochemical system

A novel 17-mer peptide ligand for cyclic AMP was designed using the amino acid sequences of essential subsites in various cyclic AMP-dependent protein kinase (protein kinase A) families. The Au disk electrode, which was modified with the designed 17-mer oligopeptide, responded to cyclic AMP but virtually did not respond to any other cyclic nucleotides using the ion channel sensor mechanism. On the other hand, a scrambled peptide, which had the same amino acid composition as and had an amino acid sequence different from the 17-mer oligopeptide, did not respond to any nucleotides. This indicates that the designed 17-mer peptide actually acted as a selective ligand for cyclic AMP. This ligand-designing strategy using peptide sequences in target-binding proteins may possibly be extended to the design of peptide ligands for other second messengers.     

Dual-wavelength optical head with a wavelength-selective filter for 0.6- and 1.2-mm-thick-substrate optical disks

A dual-wavelength optical head, believed to be new in design, for 0.6- and 1.2-mm-thick-substrate optical disks was developed by use of 650- and 780-nm-wavelength light and a wavelength-selective filter, which reduces the spherical aberration that is due to the difference in substrate thicknesses and restricts the numerical aperture for 780-nm-wavelength light. According to this configuration, both high light power efficiency and wide image field characteristics are obtained, which are suitable not only for read-only but also for recordable or rewritable optical disk systems. A reading operation for a digital video disc and for a compact disc and a recording operation for a phase change optical disk were successfully demonstrated.     

Influence of cell surface glycoprotein gC produced by pseudorabies virus on cytopathic effect

The wild-type pseudorabies virus (WT-PRV) produced a round-type cytopathic effect (CPE) in PK-15 cell line of porcine kidney origin, while PRVgCs lacking in gC-transmembrane-anchor region and PRVgC-defecting in gC gene produced a syncytium-type CPE. The mouse embryo cell line (BALB/3T3 clone A31) were transfected with recombinant plasmid of pcDNA3 which incorporated with gC gene. The transfected A31/gC cells were stably expressing gC. Only a round-type CPE was observed in these cells infected with WT-PRV, while a syncytium-type CPE was observed in the cells infected with each of the PRVgCs and PRVgC-. Any viruses described above induced a syncytium-type CPE in A31/pcDNA cells transfected with a plasmid without gC gene. By WT-PRV infection, PK-15 cells generated about 2- or 8-fold more gC than the A31/gC and A31/pcDNA cells when gC was measured by hemagglutination test. Flowcytometric analysis revealed that amount of gC on the cell surface of A31/gC and PK-15 cells increased after infection with WT-PRV. Round-type CPE was observed with the increase of gC. These results suggest that the type of CPE formation induced by PRV is dominated by the amount of gC on the infected cell surface.     

Dynein arms are oscillating force generators

Eukaryotic flagella beat rhythmically. Dynein is a protein that powers flagellar motion, and oscillation may be inherent to this protein. Here we determine whether oscillation is a property of dynein arms themselves or whether oscillation requires an intact axoneme, which is the central core of the flagellum and consists of a regular array of microtubules. Using optical trapping nanometry, we measured the force generated by a few dynein arms on an isolated doublet microtubule. When the dynein arms on the doublet microtubule contact a singlet microtubule and are activated by photolysis of caged ATP8, they generate a peak force of approximately 6pN and move the singlet microtubule over the doublet microtubule in a processive manner. The force and displacement oscillate with a peak-to-peak force and amplitude of approximately 2 pN and approximately 30 nm, respectively. The geometry of the interaction indicates that very few (possibly one) dynein arms are needed to generate the oscillation. The maximum frequency of the oscillation at 0.75 mM ATP is approximately 70 Hz; this frequency decreases as the ATP concentration decreases. A similar oscillatory force is also generated by inner dynein arms alone on doublet microtubules that are depleted of outer dynein arms. The oscillation of the dynein arm may be a basic mechanism underlying flagellar beating.     

Low-noise 0.78 μm-band laser diode unit containing Faradayrotator

A small, low-noise 0.78 μm-band laser diode unit, containing a Faraday rotator which suppresses optical feedback, was developed. Stable low-noise characteristics were realised within the 3 mW to 10 mW output power. Greater than 40 dB signal/noise ratio was obtained in an optical video disc with this unit     

Soybean and milk proteins modified by transglutaminase improves chicken sausage texture even at reduced levels of phosphate

Consumer demands for poultry processed meats have increased due to low fat content. In this experiment, chicken sausages were manufactured with various biopolymers prepared from soybean protein, casein, whey protein isolate (WPI), mixtures of soybean protein and casein, and soybean protein and WPI. The extent of various biopolymer formations was determined by sodium dodecyl sulfate-polyacrylamide gel electrophoresis and high performance liquid chromatography. Cross-linking soybean protein and casein or WPI by transglutaminase provided biopolymers with improved heat stability and emulsifying property. Shear force of chicken sausages were measured to evaluate the addition of biopolymer on the hardness in the presence of 0.05 or 0.2% sodium tripolyphosphate (STPP). The texture of chicken sausages was improved by the addition of such biopolymers even in the presence of 0.05% STPP. These results suggested that chicken sausage texture was improved by the formation of network structures that contribute to hardness of sausage gels with the addition of biopolymers. Thus, addition of biopolymers in the manufacture of chicken sausages may permit reduction in phosphate content without loss in texture.     

Observation of photocurrent generation in electrodeposited zinc oxide layers

Wurtzite zinc oxide (ZnO) films with band gap energy of about 3.3 eV were deposited onto conductive substrates by electrodeposition from a simple aqueous zinc nitrate solution at 335 K. The films showed optical transmission around 70% in the visible light region. The electrical resistance showed a strong dependence on cathodic potential. The decrease in electrical resistance could be observed with light irradiation irrespective of the cathodic potential and was attributed to the excitation of electrons from valence band to conduction band by light with wavelength below 375 nm. A photocurrent of about 0.10 A was generated for a cell composed of Ag electrode/Au/ZnO/NESA glass substrate under conditions of irradiation by sunlight.     

Numerical analysis method for the RC and geological structures subjected to extreme loading by energetic materials

This paper proposes and demonstrates a numerical simulation method suitable to analyze the local damage and dynamic response of the structures composed of the reinforced concrete (RC) and/or the geological materials subjected to extremely severe loading by the energetic material like high explosives (HE).     

Design and evaluation of robot patient for nursing skill training in patient transfer

We developed a robot patient for patient transfer training for simulating a patient’s performance during patient transfer and for enabling nurses to practice their nursing skills on it. To realize the robot patient, we focused on addressing the problems of designing its limb actions to enable it to respond to nurses’ operations. RC servos and electromagnetic brakes were installed in the joints to enable the robot to simulate a patient’s limb actions, such as embracing and remaining standing. To enable the robot to automatically respond to nurses’ operations, an identification method for these operations was developed that used voice commands and the features of the limbs’ posture measured by angle sensors installed in the robot’s joints. The robot patient’s performance was examined by a control test in which four experienced nursing teachers performed patient transfer with the robot patient and a human-simulated patient. The results revealed that the robot patient could successfully simulate the actions of a patient’s limbs according to the nursing teachers’ operations and that it is suitable for nursing skill training.