Decomposition characteristics of biodegradable plastics made from sago starch‐extraction residue

Biodegradable plastics were synthesized for the effective use of sago starch‐extraction residue, which has been discarded as a waste. Two types of esterified sago starch‐extraction residue, P‐SP and L‐SP, were obtained. It had black color for P‐SP₁₆₀ (esterified by palm oil) to light yellow color for L‐SP₈₀ (esterified by lauric acid) and showed high carbon content, ranging from 399.3 to 537.1 g kg⁻¹. Biodegradable plastics from the residue, which had high esterification degree showed thermoplasticity and slower decomposition in Andisols in Japan and Inceptisols in Philippines. The esterification degrees of P‐SP₁₆₀ and L‐SP were 3.23 and 2.95 to 5.18 mmol g⁻¹, respectively. In addition, L‐SP₈₀ exhibited the most appropriate thermal softening behavior by heating. The cumulative decomposition of P‐SP₁₆₀ in Andisols and Inceptisols showed 16.7 and 32.8% of total carbon during 31 day of the incubation. On the other hand, the decomposition rates of L‐SP₈₀ in Andisols and Inceptisols were less than 10% of total carbon during 31 day of the incubation. The addition of triacetin as plasticizer to P‐SP₁₆₀ and L‐SP₈₀ remarkably influenced the decomposition rate of both molded P‐SP₁₆₀ and L‐SP₈₀. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Mouse Gastric Epithelial Cells Resist CagA Delivery by the Helicobacter pylori Type IV Secretion System

The initial step in bacterial infection is adherence of the bacterium to the target cell surface. Helicobacter pylori exploits the interaction of bacterial adhesin protein HopQ with human epithelial CEACAMs (CEACAM1, 5, and 6) to stably adhere to gastric epithelial cells, which is necessary for delivery of the H. pylori CagA oncoprotein into the epithelial cells via a type IV secretion system. In contrast to human CEACAMs, however, HopQ does not interact with Ceacam1 (mouse CEACAM1) in vitro or in CHO cells ectopically expressing Ceacam1. Since the mouse genome lacks Ceacam5 and Ceacam6, no significant HopQ–Ceacam interaction may occur in mouse gastric epithelial cells. Here, we found that the mouse stomach has a much lower expression level of Ceacam1 than the expression level of CEACAM1 in the human stomach. Consistently, mouse gastric epithelial cells resist CagA delivery by cagA-positive H. pylori, and the delivery is restored by ectopic expression of human CEACAM1 or CEACAM5 in mouse gastric epithelial cells. Thus, despite the fact that mice are routinely used for H. pylori infection studies, a low expression level of Ceacam1 in the mouse stomach together with the loss or greatly reduced interaction of HopQ with Ceacams make the mouse an inappropriate model for studying the role of H. pylori-delivered CagA in gastric pathogenesis, including the development of gastric cancer.     

Effect of Non-Equilibrium Condensation of Moist Air on Flow Field in Ludwieg Tube

The time-dependent behavior of non-equilibrium condensation of moist air through a Ludwieg tube with a diaphragm downstream is investigated by using a computational fluid dynamics work. The two-dimensional, compressible, Navier-Stokes equations, fully coupled with the condensate droplet growth equations, are numerically solved by a third-order MUSCL type TVD finite-difference scheme with a second-order fractional time step. Baldwin-Lomax turbulence model is employed to close the governing equations. The present computations represent the experimental flows well. The results obtained show that for an initial relative humidity over 40 %, the periodic excursions of the condensation shock occurs in the Ludwieg tube, and the frequency increases with the initial relative humidity. It is also found that total pressure loss due to non-equilibrium condensation in the Ludwieg tube should not be ignored even for a very low initial relative humidity. Furthermore, the variations of condensation properties are also di     

Investigation on condensation in presence of a noncondensable gas for a wide range of Reynolds number

A theoretical model has been developed to study the local heat transfer coefficient of a condensing vapour in the presence of a noncondensable gas, where the gas/vapour mixture is flowing downward inside a vertical tube. The two-phase heat transfer is analysed using an annular flow pattern with a liquid film at the tube wall and a turbulent gas/vapour core. The gas/vapour core is modeled using the analogy between heat and mass transfer. The model incorporates Nusselt equation with McAdams modifier and Blangetti model for calculating the film heat transfer coefficient, Moody and Wallis correlations to account for film waviness effect on gas/vapour boundary layer. The suction effect due to condensation, developing flow and property variation of the gas phase is also considered. A comparative study of heat transfer coefficient and vapour mass flow rate has been made with various models to account for condensate film resistance and condensate film roughness. Results show that for very high Reynolds number, the condensation heat transfer coefficient is higher than the film heat transfer coefficient.     

用SPring-8同步辐射研究流体水银的结构变化和金属-非金属转变

随着从液态到气态的连续体积膨胀，在临界点附近，典型的液态金属水银经历了金属-非金属（M-NM）。在Spring-8的BL04B1高温高压实验站，利用同步辐射白光，采用能量色散X射线衍射（EDXD）方法，我们研究了流体水银从液体到稠密气态的宽广密度范围中的结构变化。实验方面，我们成功地开发出一个新的高压容器，它具有7个出射窗口用于收集散射X射线，测量的温度和压力上限分别是1700℃和2000bar，适合于在高温和高压下对流体物质进行能量色散X射线衍射测量。结果表明，流体水银的结构因子S(k)的精确性和可靠性有了很大的提高，并获得了流体水银的配位数和配位距离与密度变化之间的准确关系。我们发现，除了存在由配位数减少所导致的非均匀膨胀阶段之外，在水银的金属-非金属转变时还存在一新的均匀膨胀现象，即配位距离随密度减少呈线性增长阶段。基于这些新的结果，我们提出了流体水银的膨胀模型，并讨论了流体水银的金属-非金属转变与结构的关系。     

InxGa1−xAs ohmic contacts to n-type GaAs with a tungsten nitride barrier

Significant reduction of the contact resistance of In_0.7Ga_0.3As/Ni/W contacts (which were previously developed by sputtering in our laboratory) was achieved by depositing a W₂N barrier layer between the Ni layer and W layer. The In_0.7Ga_0.3 As/Ni/W₂N/W contact prepared by the radio-frequency sputtering technique showed the lowest contact resistance of 0.2 Ωmm after annealing at 550°C for 10 s. This contact also provided a smooth surface, good reproducibility, and excellent thermal stability at 400°C. The polycrystalline W₂N layer was found to suppress the In diffusion to the contact surface, leading to improvement of the surface morphology and an increase in the total area of the In_xGa−As between metal and the GaAs substrate. These improvements are believed to reduce the contact resistance.     

Strength and Phase Stability of Yttria-Ceria-Doped Tetragonal Zirconia/Alumina Composites Sintered and Hot Isostatically Pressed in Argon–Oxygen Gas Atmosphere

Yttria-ceria-doped tetragonal zirconia (Y,Ce)-TZP)/alumina (Al₂O₃) composites were fabricated by hot isostatic pressing at 1400° to 1450°C and 196 MPa in an Ar–O₂ atmosphere using the fine powders prepared by hydrolysis of ZrOCl₂ solution. The composites consisting of 25 wt% Al₂O₃ and tetragonal zirconia with compositions 4 mol% YO_1.5–4 mol% CeO₂–ZrO₂ and 2.5 mol% YO_1.5–5.5 mol% CeO₂–ZrO₂ exhibited mean fracture strength as high as 2000 MPa and were resistant to phase transformation under saturated water vapor pressure at 180°C (1 MPa). Postsintering hot isostatic pressing of (4Y, 4Ce)-TZP/Al₂O₃ and (2.5Y, 5.5Ce)-TZP/Al₂O₃ composites was useful to enhance the phase stability under hydrothermal conditions and strength.     

Preparation and characterization of stable dispersions of carbon black and nanodiamond in culture medium for in vitro toxicity assessment

Stable dispersions of carbon black and nanodiamond in culture medium were prepared by adding a pre-mixed dispersion of commercial carbon black or nanodiamond in aqueous bovine serum albumin (BSA) solution to culture medium. Dynamic light scattering revealed that carbon black and nanodiamond dispersions prepared in both NaCl solution and culture medium were highly stable. From DLVO theory and the results of zeta potential measurements, the theoretical effect of the electrostatic interactions between adsorbed BSA molecules was found to be minimal. The asymmetric flow field-flow fractionation measurements revealed that 0.05 or 0.56 mg/mL of BSA molecules were adsorbed on 0.11 or 1.09 mg/mL of carbon black, respectively, indicating 1:2 complexation of BSA with the colloidal particles. In the case of nanodiamond, 0.06 or 0.60 mg/mL of BSA molecules were adsorbed on 0.10 or 1.05 mg/mL of nanodiamond, respectively, indicating 1:2 complexation of BSA, which is the same ratio as in the case of carbon black. The adsorbed BSA molecules served as an effective stabilizing agent for the carbon black and nanodiamond, ensuring dispersion stability for at least 1 week. The preparation of the dispersions can be easily carried out by other researchers for toxicity studies.     

Direct Observation of the Collection Process for Dust Particles from an Air Stream by a Charged Water Droplet

One of the most effective precipitation methods for submicrometer particles is the charged droplet scrubber. The dust collection in the charged droplet scrubber is considered to consist of some processes with respect to the interaction between charged dust particles and a charged water droplet. That is, the charged dust particles are attracted to, collide with, adhere to, penetrate into, rebound from, accumulate on, and reentrain from a charged water droplet. The direct observation of the collection process for dust particles by a charged water droplet was conducted by using the experimental setup designed by the authors. It was found from the experiments that particles with good wettability were captured inside the water droplet, particles with poor wettability floated at regular intervals on the droplet surface, and particles with medium wettability were trapped on or inside the water droplet. When particles were trapped on the droplet surface the growth of dendritic depositions was found, and their behavior was very distinct from those obtained on the fibrous filter due to the fluidity of the droplet surface. The deposition mechanisms of charged particles on the charged water droplet are discussed qualitatively.     

Effects of dressing containing plant sterol on serum cholesterol concentration and the safety evaluation in borderline or mildly hypercholesterolemic Japanese subjects

In a placebo-controlled double-blind study, we examined the effects of dressing containing plant sterol (PS) on blood lipids and the safety in Japanese borderline or mildly hypercholesterolemic subjects. Fifty-nine subjects [total cholesterol (TC) concentration > or = 200 mg/dL] were randomly divided into two groups and were given daily 15 g of dressing containing 800 mg of PS [PS(+)-group] or without PS [PS(-)-group] for 12 weeks. Every 4 weeks, fasting blood was examined and subjective symptoms were analyzed. Serum TC, low-density lipoprotein cholesterol (LDL-C) and apolipoprotein B (ApoB) concentrations did not change in the PS(-)-group, while TC and ApoB significantly decreased in the PS(+)-group at 8 and 12 weeks and LDL-C at 4, 8 and 12 weeks. Moreover, serum TC, LDL-C and ApoB concentrations were significantly lower than those of PS(-)-group at 8 and 12 weeks. Other laboratory tests were all in normal ranges and no adverse events were observed. The results indicated that PS-containing dressing decreased serum TC, LDL-C and ApoB concentrations in borderline or mildly hypercholesterolemic subjects. It is therefore proved that the dressing containing PS is helpful in maintaining blood cholesterol level normal and hence, the health of Japanese.