Direct Observation of the Collection Process for Dust Particles from an Air Stream by a Charged Water Droplet

One of the most effective precipitation methods for submicrometer particles is the charged droplet scrubber. The dust collection in the charged droplet scrubber is considered to consist of some processes with respect to the interaction between charged dust particles and a charged water droplet. That is, the charged dust particles are attracted to, collide with, adhere to, penetrate into, rebound from, accumulate on, and reentrain from a charged water droplet. The direct observation of the collection process for dust particles by a charged water droplet was conducted by using the experimental setup designed by the authors. It was found from the experiments that particles with good wettability were captured inside the water droplet, particles with poor wettability floated at regular intervals on the droplet surface, and particles with medium wettability were trapped on or inside the water droplet. When particles were trapped on the droplet surface the growth of dendritic depositions was found, and their behavior was very distinct from those obtained on the fibrous filter due to the fluidity of the droplet surface. The deposition mechanisms of charged particles on the charged water droplet are discussed qualitatively.     

Preparation and characterization of stable dispersions of carbon black and nanodiamond in culture medium for in vitro toxicity assessment

Stable dispersions of carbon black and nanodiamond in culture medium were prepared by adding a pre-mixed dispersion of commercial carbon black or nanodiamond in aqueous bovine serum albumin (BSA) solution to culture medium. Dynamic light scattering revealed that carbon black and nanodiamond dispersions prepared in both NaCl solution and culture medium were highly stable. From DLVO theory and the results of zeta potential measurements, the theoretical effect of the electrostatic interactions between adsorbed BSA molecules was found to be minimal. The asymmetric flow field-flow fractionation measurements revealed that 0.05 or 0.56 mg/mL of BSA molecules were adsorbed on 0.11 or 1.09 mg/mL of carbon black, respectively, indicating 1:2 complexation of BSA with the colloidal particles. In the case of nanodiamond, 0.06 or 0.60 mg/mL of BSA molecules were adsorbed on 0.10 or 1.05 mg/mL of nanodiamond, respectively, indicating 1:2 complexation of BSA, which is the same ratio as in the case of carbon black. The adsorbed BSA molecules served as an effective stabilizing agent for the carbon black and nanodiamond, ensuring dispersion stability for at least 1 week. The preparation of the dispersions can be easily carried out by other researchers for toxicity studies.     

Hydrothermal Synthesis and Low-Temperature Sintering of Zinc Gallate Spinel Fine Particles

Nanosized powders of single-phase zinc gallate (ZnGa₂O₄) spinel were hydrothermally synthesized from solutions in the presence of NaOH over the pH range of 1.9 to 7.0 and from solutions above pH 7.0, i.e., the very basic medium (pH of 13.85), by removing the residual ZnO phase by washing with aqueous H₂SO₄ from the precipitate mixtures of zinc gallate spinel particles and ZnO. A very wide compositional range (Zn/2Ga = 0.705–1.157) of zinc gallate spinel solid solutions could be hydrothermally synthesized in the form of nanosized particles from acid and very basic mediums (pH of 2.4–13.85) in the presence of NaOH. These hydrothermally synthesized spinel powders showed good sinterability and almost full densification at 1100°C for 1 h. Dense sintered bodies consisting of single-phase zinc gallate spinel were fabricated at 1100°C using zinc gallate spinel powders having almost stoichiometric composition formed from the solution at pH 9.95 in the presence of aqueous ammonia.     

Grafted stock synthesis of ABS at the ultimate high ratio of polybutadiene to poly(styrene‐co‐acrylonitrile)

This study describes the emulsion grafting of styrene and acrylonitrile onto 60–70% polybutadiene (PB), in the presence or absence of tert‐dodecanetiol as a chain transfer reagent with a radical initiator, and the properties of the obtained grafted stock. There was no significant difference in terms of effect of the initiation mode on the grafting efficiency resulting from the high grafting reactivity of PB. However, the grafted stock with 70% PB prepared in the presence of tert‐dodecanetiol and the adequate selection of an initiation system gave a homogeneous dispersion of the PB particles into poly(styrene‐co‐acrylonitrile) (SAN) matrix. The initiation system involves tert‐butyl peroxylaurate, tert‐butyl peroxyacetate, and tert‐butyl peroxyisopropylcarbonate coupled with ferrous sulfate. The efficient coverage of the SAN grafted layer around 70% PB particles was observed by TEM to eventually give excellent impact resistance, high surface gloss, and good thermal resistance. The absence of tert‐dodecanetiol resulted in a toughness reduction of ABS. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 3462–3470, 2001     

Power characteristics of unsteadily forward–reverse rotating impellers in an unbaffled aerated agitated vessel

Power characteristics of an unbaffled aerated agitated vessel with unsteadily forward‐reverse rotating impellers, ie a new type of gas–liquid agitator named ‘AJITER’, treating viscous Newtonian liquids were studied experimentally. Measurements were first made on the agitation torque, ie the torque on the drive shaft on which forward–reverse rotating impellers with four delta‐type blades were attached, and the data obtained were analyzed by fitting them to an equation consisting of two terms with respect to the resistance of the fluid, one due to viscous drag and the other due to added moment of inertia. The effects of operating conditions and physical properties of liquids on the drag and added moment of inertia coefficients were then evaluated, and empirical relationships which estimate values of these coefficients, useful to predict the unsteady behavior and magnitude of agitation torque, were presented. Furthermore, equations were developed for estimating the average and maximum power consumptions as a function of the drag and added moment of inertia coefficients. Prediction of respective power levels in AJITER by these equations was also discussed. © 2001 Society of Chemical Industry     

Matrix influence on the piezoelectric properties of piezoelectric ceramic/polymer composite exhibiting particle alignment

This study was addressed to the influence of an electric field strength applied at fabrication process and matrix properties, such as the dielectric constant and the Young's modulus, on “pseudo‐1‐3 piezoelectric ceramic/polymer composite” in order to further enhance the piezoelectricity of that. The pseudo‐1‐3 piezoelectric ceramic/polymer composite consists of linearly ordered piezoelectric ceramic particles in polymer material. Silicone gel, silicone rubber, urethane rubber, and poly‐methyl‐methacrylate, which exhibit different dielectric constants and Young's modulus, were used as matrices to evaluate the matrix influence. The piezoelectricity of the pseudo‐1‐3 piezoelectric ceramic/polymer composite was evaluated using the piezoelectric strain constant d₃₃. The d₃₃ is one of the indices of the piezoelectric properties for piezoelectric materials. As a result, it was confirmed that d₃₃ of the pseudo‐1‐3 piezoelectric ceramic/polymer composite increased with the increase of the electric filed strength applied at fabrication process, though, it reached a constant value at a certain strength value. Further it was confirmed that dielectric constant of the matrix had a small influence on d₃₃ of the pseudo‐1‐3 piezoelectric ceramic/polymer composite, however, in case of matrix of lower Young's modulus, d₃₃ was increase. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41817.     

Effect of Ga2O3 on Sintering and Phase Stability of Sc2O3‐Doped Tetragonal Zirconia Prepared via Aqueous Solution Route

The effects of the presence of Ga₂O₃ on low‐temperature sintering and the phase stability of 4, 5, and 6 mol% Sc₂O₃‐doped tetragonal zirconia ceramics (4ScSZ, 5ScSZ, and 6ScSZ, respectively) were investigated. A series of zirconia sintered bodies with compositions (ZrO₂)_0.99?x(Sc₂O₃)_x(Ga₂O₃)_0.01, x = 0.04, 0.05, and 0.06 was fabricated by sintering at 1000°C to 1500°C for 1 h using fine powders that were prepared via the combination of homogeneous precipitation method and hydrolysis technique using monoclinic zirconia sols synthesized through the forced hydrolysis of an aqueous solution of zirconium oxychloride at 100°C for 168 h. The presence of 1 mol% Ga₂O₃ was effective in reducing sintering temperature necessary to fabricate dense bodies and enabled to obtain dense sintered bodies via sintering at 1100°C for 1 h. The phase stability, that is, low‐temperature degradation behavior of the resultant zirconia ceramics was determined under hydrothermal condition. The zirconia ceramics codoped with 1 mol% Ga₂O₃ and 6 mol% Sc₂O₃ (1Ga6ScZ) fabricated via sintering at 1300°C for 1 h showed high phase stability without the appearance of monoclinic zirconia phase, that is the tetragonal‐to‐monoclinic phase transformation was not observed in the 1Ga6ScZ after treatment under hydrothermal condition at 150°C for 30 h.     

Phase separation behavior and morphology development of phenolic resin/PMMA/hexamethylenetetrarnine blends

Summary In order to obtain materials with nanopores which will be applicable for many fields, the structures of the cured blends of phenolic resin (PhN), poly(methyl methacrylate) (PMMA) and curing agent were studied. After PMMA was extracted from cured blends, the structures of cured phenolic resins were observed with SEM. As a results, it was found that nanosized continuous pore structures were formed in extremely wide composition region if curing temperature was high.     

Enzymatic syntheses of N-lauroyl-β-alanine homologs in organic media

Enyzmatic amidation of the primary amines β-alanine ethyl ester and 3-aminopropionitrile with methyl laurate by means of immobilized lipase (Candida antarctica lipase, CAL) resulted in the formation in good yield of N-lauroyl-β-alanine ethyl ester and 3-(N-lauroylamino)-propionitrile, respectively. When 3-amino-propionitrile was used as substrate, diisopropyl ether was a suitable solvent. Changing the reaction temperature (12–80°C) did not affect the yields, and room temperature was a suitable temperature for this reaction. In the investigation of reaction conditions, the use of equimolar amounts (5 mmol) of substrate and ester, along with 0.5 g of CAL, in diisopropyl ether gave the best yield (99.3%) after 24 h of incubation at 24°C. The enzyme activity in the amidation reaction did not decrease even after six uses. With β-alanine ethyl ester hydrochloride as substrate, diisopropyl ether was unsuited as a solvent owing to the low solubility of the substrate in this solvent. In this reaction, the best yield (82.0%) was attained by using dioxane as solvent. CAL achieved higher extents of amide synthesis with long-chain than with short-chain ester substrates. The enzyme accepted only nonbulky primary amines as substrates.     

Human behavior in a staircase during a total evacuation drill in a high‐rise building

Many studies have been conducted on the evacuation behavior on the staircases of buildings, but very little data are available for a situation with many occupants in a crowded high‐rise building. Therefore, this study investigated the evacuation behavior of a large number of evacuees on the staircase of a 25‐story high‐rise building. A total evacuation drill was conducted with 2088 evacuees, and the behavior of 1136 evacuees on the landings of the south staircase was recorded by a video recorder on the ceiling. The relationship between the density and speed of the evacuees on the landings was analyzed from the evacuation data for two situations: without and with merging in the stair flow. The evacuation stair flow in this drill had merging occupants entering from the floors, but no one entered from the lower floors during the latter period of the drill. Therefore, the flow during the latter period was treated as non‐merging flow, for which it was observed that, when the staircase was fully crowded, the density on the landings in the moving situation was different from that in the stopped situation. Moreover, the density on the landings was different from that on the treads. Furthermore, in the merging flow, a merging ratio of approximately 50:50 occurred during the congested evacuation. Copyright © 2016 John Wiley & Sons, Ltd.