Enzymatic syntheses of N-lauroyl-β-alanine homologs in organic media

Enyzmatic amidation of the primary amines β-alanine ethyl ester and 3-aminopropionitrile with methyl laurate by means of immobilized lipase (Candida antarctica lipase, CAL) resulted in the formation in good yield of N-lauroyl-β-alanine ethyl ester and 3-(N-lauroylamino)-propionitrile, respectively. When 3-amino-propionitrile was used as substrate, diisopropyl ether was a suitable solvent. Changing the reaction temperature (12–80°C) did not affect the yields, and room temperature was a suitable temperature for this reaction. In the investigation of reaction conditions, the use of equimolar amounts (5 mmol) of substrate and ester, along with 0.5 g of CAL, in diisopropyl ether gave the best yield (99.3%) after 24 h of incubation at 24°C. The enzyme activity in the amidation reaction did not decrease even after six uses. With β-alanine ethyl ester hydrochloride as substrate, diisopropyl ether was unsuited as a solvent owing to the low solubility of the substrate in this solvent. In this reaction, the best yield (82.0%) was attained by using dioxane as solvent. CAL achieved higher extents of amide synthesis with long-chain than with short-chain ester substrates. The enzyme accepted only nonbulky primary amines as substrates.     

Morphological study by TEM on uniaxially oriented thin films of PET, PEN and their blends

Uniaxially oriented thin films of poly(ethylene terephthalate) (PET), poly(ethylene 2,6-naphthalene dicarboxylate) (PEN) and their blends were prepared by applying shear strain to their respective melts, and the resulting morphologies were studied by transmission electron microscopy. Selected-area electron diffraction of each film revealed well-defined uniaxial orientation of polymer chains in the shearing direction. In the uniaxially oriented thin film of PEN, stacked-lamellar structure with the average long period of 27 nm consisting of a crystalline region about 15 nm thick and an amorphous one about 12 nm thick was found here and there in the dark-field image: PEN-type. On the other hand, stacked-lamellar structure was rarely observed in the case of PET: PET-type. In PET/PEN blends, the morphologies changed from the PET-type to the PEN-type with increasing content of PEN.     

Characteristic properties of cutting fluid additives derived from the adducts of diamines and acid chlorides

A number of N,N′-diacylalkyldiamines were prepared from the reaction of acid chlorides with 1,8-diaminooctane and 1,12-diaminododecane and screened for anti-rust properties and antimicrobial activity in spent coolants of water-based cutting fluids. Aqueous solutions of N,N′-dihexanoyl-1,8-diaminooctane and N,N′-isobutyroyl-1,12-diaminododecane showed good anti-rust properties for water-based cutting fluids. Aqueous emulsions of N,N′-dibutyroyl-, dipentanoyl-, dihexanoyl- and dioctanoyl-1,12-diaminododecane showed good lubricities and antimicrobial activity for water-based cutting fluids.     

Effect of fatty acids on the strain‐induced crystallization of natural rubber detected by tear energy measurements

The strain‐induced crystallization of natural rubber (NR) was investigated by the measurement of the tear energy of a crosslinked blend consisting of NR and noncrystalline styrene–butadiene rubber (SBR). When NR was dispersed into the SBR matrix, the tear energy of SBR increased at various temperatures and tear rates. After the application of the principle of time–temperature superposition to the tear energy according to the Williams–Landel–Ferry equation, two distinct curves were found for the NR/SBR blend with respect to the reduced tear rate, despite the fact that the tear energy of SBR or the SBR/SBR blend gave its own single composite curve. When the fatty acid in the NR/SBR blend was removed by acetone extraction, the tear energy of the blend drew a single composite curve. The conversion of the two curves into the single composite curve for the NR/SBR blend suggested that the tear energy depended on the strain‐induced crystallization of NR dispersed in the SBR matrix, which was suppressed by the removal of the fatty acid. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 613–619, 2005     

Anatase-Type TiO2 and ZrO2-Doped TiO2 Directly Formed from Titanium(III) Sulfate Solution by Thermal Hydrolysis: Effect of the Presence of Ammonium Peroxodisulfate on their Formation and Properties

Anatase-type TiO₂ powder containing sulfur with absorption in the visible region was directly formed as particles with crystallite in the range 15–88 nm by thermal hydrolysis of titanium(III) sulfate (Ti₂(SO₄)₃) solution at 100°–240°C. Because of the presence of ammonium peroxodisulfate ((NH₄)₂S₂O₈), the yield of anatase-type TiO₂ from Ti₂(SO₄)₃ solution was accelerated, and anatase with fine crystallite was formed. Anatase-type TiO₂ doped with ZrO₂ up to 9.8 mol% was directly precipitated as nanometer-sized particles from the acidic precursor solutions of Ti₂(SO₄)₃ and zirconium sulfate in the presence and the absence of (NH₄)₂S₂O₈ by simultaneous hydrolysis under hydrothermal conditions at 200°C. By doping ZrO₂ into TiO₂ and with increasing ZrO₂ content, the crystallite size of anatase was decreased, and the anatase-to-rutile phase transformation was retarded as much as 200°C. The anatase-type structure of ZrO₂-doped TiO₂ was maintained after heating at 1000°C for 1 h. The favorable effect of doping ZrO₂ to anatase-type TiO₂ on the photocatalytic activity was observed.     

Phase separation behavior and morphology development of phenolic resin/PMMA/hexamethylenetetrarnine blends

Summary In order to obtain materials with nanopores which will be applicable for many fields, the structures of the cured blends of phenolic resin (PhN), poly(methyl methacrylate) (PMMA) and curing agent were studied. After PMMA was extracted from cured blends, the structures of cured phenolic resins were observed with SEM. As a results, it was found that nanosized continuous pore structures were formed in extremely wide composition region if curing temperature was high.     

Proton conducting acid-base mixed materials under water-free condition

In recent years, a lot of attentions have been paid for a development of water-free polymer electrolyte membranes fuel cells (PEMFC) at intermediate temperatures (above 100 °C) because of many technological advantages of higher temperature operation. However, the proton conductivity of conventional polymer membranes under water-free condition is usually very low and the polymeric membranes are not stable at higher temperatures. So, the development of non-hydrous proton conducting membrane under water-free condition has been a state of the art issue in the advanced PEMFC technology. In this study, non-hydrous protonic conducting material was prepared by the mixing of acidic surfactant of mono-dodecylphosphate (MDP) and organic base of benzimidazole (BnIm). The proton conductivity and thermal stability of MDP-BnIm mixed material increased with the mixing ratio of BnIm. Maximum proton conductivity of MDP-BnIm mixed material (BnIm mixing ratio of 200 wt.%. vs. MDP) was found to be 1×10⁻³ S cm⁻¹ at 150 °C under water-free condition.     

Application of High Temperature Corrosion-Resistant Materials and Coatings Under Severe Corrosive Environment in Waste-to-Energy Boilers

Corrosion-resistant materials (CRMs) and coatings are key technologies to increase power generation efficiency and reduce maintenance in waste-to-energy (WTE) plants. Corrosion environment became severe as steam temperatures have increased. The steam condition of more than 400 °C/3.9 MPa became possible in WTE boilers by using highly durable corrosion-resistant coatings, such as thermal spray of Al/80Ni20Cr alloy, HVOF-sprayed NiCrSiB alloy, Alloy 625 weld overlay for waterwall tubes and also superheater tubes. Also, the use of 310S type stainless steels and high Cr-high Mo-Ni base and high Si-Cr-Ni-Fe alloys have progressed because of a better understanding of corrosion mechanisms. Furthermore, high durability coatings using cermet and ceramic materials were applied to high temperature superheaters. This paper describes the major developments and the application of CRMs and coating technologies in the last 30 years in WTE plants, the corrosion mechanisms of alloys, the deterioration mechanisms of spray coating layers, and future subjects for the development of corrosion-resistant materials and coatings.     

Mean–variance relationship of the number of flows in traffic aggregation and its application to traffic management

We consider the mean–variance relationship of the number of flows in traffic aggregation, where flows are divided into several groups randomly, based on a predefined flow aggregation index, such as source IP address. We first derive a quadratic relationship between the mean and the variance of the number of flows belonging to a randomly chosen traffic aggregation group. Note here that the result is applicable to sampled flows obtained through packet sampling. We then show that our analytically derived mean–variance relationship fits well those in actual packet trace data sets. Next, we present two applications of the mean–variance relationship to traffic management. One is an application to detecting network anomalies through monitoring a time series of traffic. Using the mean–variance relationship, we determine the traffic aggregation level in traffic monitoring so that it meets two predefined requirements on false positive and false negative ratios simultaneously. The other is an application to load balancing among network equipments that require per-flow management. We utilize the mean–variance relationship for estimating the processing capability required in each network equipment.     

Autonomic load balancing of flow monitors

In monitoring flows at routers for flow analysis or deep packet inspection, the monitor calculates hash values from the flow ID of each packet arriving at the input port of the router. Therefore, the monitors must update the flow table at the transmission line rate, so high-speed and high-cost memory, such as SRAM, is used for the flow table. This requires the monitors to limit the monitoring target to just some of the flows. However, if the monitors randomly select the monitoring targets, multiple routers on the route will sometimes monitor the same flow, or no monitors will monitor a flow. To maximize the number of monitored flows in the entire network, the monitors must select the monitoring targets while maintaining a balanced load among them. We propose an autonomous load-balancing method where monitors exchange information on monitor load only with adjacent monitors. Numerical evaluations using the actual traffic matrix of Internet2 show that the proposed method improves the total monitored flow count by about 50% compared with that of independent sampling. Moreover, we evaluate the load-balancing effect on 36 backbone networks of commercial ISPs.