Atomically resolved imaging by low-temperature frequency-modulation atomic force microscopy using a quartz length-extension resonator

Low-temperature ultrahigh vacuum frequency-modulation atomic force microscopy (AFM) was performed using a 1 MHz length-extension type of quartz resonator as a force sensor. Taking advantage of the high stiffness of the resonator, the AFM was operated with an oscillation amplitude smaller than 100 pm, which is favorable for high spatial resolution, without snapping an AFM tip onto a sample surface. Atomically resolved imaging of the adatom structure on the Si(111)-(7x7) surface was successfully obtained.     

Monitoring behaviour of catabolic genes and change of microbial community structures in seawater microcosms during aromatic compound degradation

The behaviour of microbial populations responsible for degradation of the aromatic compounds, phenol, benzoate, and salicylate, and changes of microbial community structures in seawater microcosms were analysed quantitatively and qualitatively using MPN–PCR and PCR–DGGE. The purpose of the study was to investigate the ecology of the entire microbial community during bioremediation. Bacterial populations possessing catechol 1,2-dioxygenase (C12O) DNA were evidently the primary degraders of phenol and benzoate, but others possessing catechol 2,3-dioxygenase (C23O) DNA increased to enhance substrate degradation under high-load conditions when the substrates were present for long periods. However, salicylate degradation was evidently facilitated by specific bacterial populations possessing C23O DNA. PCR–DGGE analyses suggested that bacterial populations already relatively dominant in the original microcosm contributed to phenol degradation. Bacteria composing a minor fraction of the original population apparently increased and contributed to benzoate degradation. Bacterial populations possessing C23O DNA were responsible for salicylate degradation, however, and different degrading bacteria were evidently selected for, depending on the initial salicylate concentration. Microbial community structure tended to be simplified by aromatic compound degradation. Thus, microbial monitoring can elucidate the behaviour of bacterial populations responsible for aromatic compound degradation and be used to assess the effects of bioremediation on intact microbial ecosystems.     

The preparation of copper fine particle paste and its application as the inner electrode material of a multilayered ceramic capacitor

Well size-controlled copper fine particles (diameter: 100-300?nm) were used as the inner electrode material of multilayered ceramic capacitors (MLCCs). The particles were dispersed in terpineol to form a printing paste with 50?wt% copper particles. The MLCC precursor modules prepared by the layer-by-layer printing of copper and BaTiO(3) particles were cosintered. Detailed observation of the particles, paste, and MLCCs before and after sintering was carried out by electron microscopy. The sintering temperature of Cu-MLCC was as low as 960?°C. The permittivity of these MLCCs was successfully measured with the copper inner layers.     

Fabrication of oriented ZnO nanopillar self-assemblies and their application for photovoltaic devices

Organic photovoltaic devices based on a blend of poly(3-hexylthiophene) and a fullerene have been studied by inserting oriented zinc oxide nanopillars which were fabricated by a new method at low temperature (343?K). The dependence of the photovoltaic performance on the zinc oxide morphology was investigated, and it is concluded that the oriented zinc oxide nanopillar array plays an important role in collecting photogenerated electrons and acts as a conducting path to the electrode. Insertion of the oriented zinc oxide nanopillars in the photovoltaic cells produced enhanced performance with a power conversion efficiency of 1.22% under AM1.5 illumination.     

Size-controlled oxidation-resistant copper fine particles covered by biopolymer nanoskin

Size-controlled oxidation-resistant copper fine particles were prepared from insoluble CuO micron-sized particles. The particle sizes were quite uniform and could be varied only by the concentration of the complex reagent from 45 to 175 nm. No template material was needed for size control. Gelatin was selected as the protective polymer. Addition of protease after formation of copper fine particles decomposed preferentially loop and tail parts of gelatin. The remaining nanoskin gelatin layer, covered on the particle surface, prevents oxidation of copper.     

Imaging the passage of a single hydrocarbon chain through a nanopore

Molecular transport through nanoscale pores in films, membranes and wall structures is of fundamental importance in a number of physical, chemical and biological processes. However, there is a lack of experimental methods that can obtain information on the structure and orientation of the molecules as they pass through the pore, and their interactions with the pore during passage. Imaging with a transmission electron microscope is a powerful method for studying structural changes in single molecules as they move and for imaging molecules confined inside carbon nanotubes. Here, we report that such imaging can be used to observe the structure and orientation of a hydrocarbon chain as it passes through nanoscale defects in the walls of a single-walled carbon nanotube to the vacuum outside, and also to study the interactions between the chain and the nanopore. Based on experiments at 293 K and 4 K we conclude that the major energy source for the molecular motions observed at 4 K is the electron beam used for the imaging.     

Radiophotoluminescence dosimetry using a small spherical glass: a preliminary phantom study

A radiophotoluminescence dosimetry has been proposed using a spherical silver-activated phosphate glass with a diameter of 1.5 mm. A 6 MV photon dose of 2 Sv (2 Gy) was delivered to 14 spherical glass samples placed between two solid water phantoms at a depth of 10 cm. The samples were positioned within a 20 x 20 mm(2) centred at beam axis to ensure uniform dose absorption. A normalised output from a read-out system was obtained by simultaneously measuring luminescence from a non-irradiated reference and that from an irradiated reference to eliminate background contamination and time-varying fluctuation of the readout system, leading to a normalised standard deviation of 1.8%. A dose up to 3.5 Sv (3.5 Gy) was delivered to three spherical glass samples positioned between two solid water phantoms at a depth of 10 cm. The normalised output increased linearly with the applied dose.     

Syntheses and characterizations of a new calixarene-porphyrin conjugate as electron transfer system

A new calixarene-based donor-acceptor system, cone conformer 1, was prepared for the first time. In this compound, the calix[4]arene serves to juxtapose a tri-chloroquinone acceptor near the porphyrin photo-donor plane. As to the conformational control, the cone conformer 1 gave two peaks of phenolic OH groups at 8.40 and 8.43 ppm. This shows that cone conformer 1 is stabilized by intramolecular hydrogen bonds. The fluorescence intensity of 1 was 35% of that for the control compound 2. This means the tri-chloroquinone group in 1 efficiently quenched the fluorescence of ZnP*. The shortest edge-to-edge separation of the chromophores of 1 is ca. 8 A (as judged by CPK models). This provides a new calixarene-based supramolecular system in which through-space donor-to-acceptor electron transfer is observed upon photoexcitation.