Modification of bismaleimide resin by poly(propylene phthalate), poly(butylene phthalate) and related (co)polyesters

Aromatic polyesters were prepared and used to decrease the brittleness of the bismaleimide resin composed of 4,4′-bismaleimidediphenyl methane (BMI) and o,o′-diallyl bisphenol A (DBA) (Matrimid 5292 resin). The aromatic polyesters included poly(propylene phthalate) (PPP), poly(2,2-dimethylpropylene phthalate) (PDPP), poly(butylene phthalate) (PBP) and poly(butylene phthalate-co-butylene terephthalate) (50mol% terephthalate unit) (PBPT). The polyesters were effective modifiers for decreasing the brittleness of the bismaleimide resin. For example, inclusion of 20wt% PPP (MW 18700) led to 50% increase in the fracture toughness (K_IC) with retention of flexural properties and a slight loss of the glass transition temperature, compared with the mechanical and thermal properties of the unmodified cured bismaleimide resin. Micro-structures of the modified resins were examined by scanning electron microscopy and dynamic viscoelastic analysis. The thermal stability of the modified resins was slightly lower than that of the unmodified resin as determined by thermogravimetric analysis. The toughening mechanism is discussed in terms of the morphological and dynamic viscoelastic behaviour of the modified bismaleimide resin system. © 1998 SCI.     

High-efficiency GaAs and GaInP solar cells grown by all solid-state molecular-beam-epitaxy

We report the initial results of GaAs and GaInP solar cells grown by all solid-state molecular-beam-epitaxy (MBE) technique. For GaAs single-junction solar cell, with the application of AlInP as the window layer and GaInP as the back surface field layer, the photovoltaic conversion efficiency of 26% at one sun concentration and air mass 1.5 global (AM1.5G) is realized. The efficiency of 16.4% is also reached for GaInP solar cell. Our results demonstrate that the MBE-grown phosphide-contained III-V compound semiconductor solar cell can be quite comparable to the metal-organic-chemical-vapor-deposition-grown high-efficiency solar cell.     

Dietary Guar Gum Reduces Lymph Flow and Diminishes Lipid Transport in Thoracic Duct-Cannulated Rats

Guar gum has a well-recognized hypolipidemic effect. This effect is thought to be due to the physicochemical properties of guar gum, which may cause changes in adsorption of lipids or the viscosity of the intestinal contents. Guar gum is a non-specific absorption inhibitor of any type of lipid-soluble compound. Permanent lymph duct cannulation was performed on rats to investigate the effects of dietary guar gum on lymph flow and lipid transport. Rats fed a 5% guar gum diet were compared with those fed a 5% cellulose diet, and lymph was collected after feeding. The water-holding capacity (WHC), settling volume in water (SV), and viscosity of guar gum were compared with those of cellulose. Rats fed with the guar gum diet had significantly lower lymph flow and lymphatic lipid transport than did rats fed with the cellulose diet. The WHC, SV, and viscosity of guar gum were significantly higher than those of cellulose. We propose that dietary guar gum reduces lymph flow and thereby diminishes lipid transport by means of its physicochemical properties related to water behavior in the intestine.     

Separation of Small Particles Suspended in Liquid by Nonuniform Traveling Field

A study of size and charge-dependent separation of small particles in liquid using a traveling-field-type electric curtain device is made. The principle of the separation is to make use of the spatial harmonic components of the rotating traveling field produced by such a device, the first harmonic propagating in one direction, which plays a dominant role in the region distant from the electrodes, and the second harmonic propagating in the opposite direction, which becomes dominant near the electrodes. Small particles brought into this field undergo circular motion and, as a result of field nonuniformity, are repelled from the electrodes and drift in the direction of the dominant harmonics. The lighter or more charged particles are strongly repelled from the electrodes and swept by the first harmonic, while the heavier or less charged particles can approach the electrodes and are transported by the second harmonic in the opposite direction, thus enabling separation by mass and charge. First a theoretical investigation of this method is made to clarify the operation conditions for the separation, then the experimental observations of particle motion are made and scaling laws of transport velocity with the applied voltage and frequency are confirmed. Finally, an example of a cell separator design using this method is presented.     

Polymers degradable under environmental conditions through end-modification of poly(α-methylstyrene) derivatives

To induce degradabilities in polymers in response to environmental conditions, the end-modification reactions of poly(α-methylstyrene) derivatives were carried out. When diphenylphosphine chloride was used as a modifier for the living end of para-substituted PMS, the coupling efficiency was ca. 50%. 2-Phenylallyl halide derivatives such as 2-phenylallyl bromide, 2-(4-tolyl)allyl bromide, and α-trifluoromethylstyrene were found to be suitable end-modification agents. For example, ω-2-phenylallyl PMS was prepared with almost quantitative functionality by the reaction of the living PMS with 2-phenylallyl bromide. In a similar way, ω-3,3-difluoro-2-phenylallyl and ω-2-(4-tolyl)allyl PMS derivatives were synthesized. Based on thermogravimetric analysis, onset of the degradation temperature of the end-modified PMS derivatives decreased in the following order: ω-hydrogen- > ω-3,3-difluoro-2-phenylallyl- > ω-2-phenylallyl- > ω-2-(4-tolyl)allyl-PMS. Actually, the onset temperature of ω-2-(4-tolyl)allyl-PMS derivatives was 50°C lower than that of ω-H-PMS derivatives. These results indicate that the active species is produced effectively at the end unsaturated bond, which initiates the depolymerization of the polymer at rather low temperatures. Ionic degradation of these polymers was also investigated using butyllithium as an anionic initiator and methanesulfonic acid as a cationic initiator. Tendencies similar to the thermal degradation were observed. Therefore, it is concluded that a 2-phenylallyl substituent at the end of the PMS chain induces effective degradation through several mechanisms such as radical, anionic and cationic depolymerization reactions.     

Novel Heneicosadienoic and Tricosadienoic Acid Isomers in Ovaries of Marine Archaeogastropods

To investigate unusual odd-chain fatty acids (FA) from gonads of archaeogastropods, limpets Cellana grata and Cellana toreuma, a subfraction enriched in FA with two double bonds extracted from the gonads was obtained by using argentation thin-layer chromatography. The resulting fraction was analyzed by using capillary gas chromatography-mass spectrometry of its methyl esters, 3-pyridylcarbinol esters and pyrrolidide derivatives. Six novel all-cis diene isomers were identified as 7,18-heneicosadienoic (21:2Δ7,18), 8,14-tricosadienoic (23:2Δ8,14), 9,15-tricosadienoic (23:2Δ9,15), 7,18-tricosadienoic (23:2Δ7,18), 9,18-tricosadienoic (23:2Δ9,18), and 9,20-tricosadienoic (23:2Δ9,20) acids. In the present study, the differences in the proportion of tricosadienoic acid isomers between the ovary lipids of C. grata and C. toreuma were recognized.     

Voltammetric study of electrocatalysis for dioxygen reduction by trinuclear rutheniumammine complex confined in a polymer membrane

Electrocatalytic O₂ reduction was studied using a modified electrode coated with a Nafion membrane (Nf) dispersing a trinuclear ruthenium ammine complex ([(NH₃)₅Ru^IIIORu^IV(NH₃)₄ORu^III(NH₃)₅]Cl₆, Ru-red). When measuring cyclic voltammogram under O₂ atmosphere (at 0.5 mV s⁻¹), catalytic currents due to O₂ reduction were found to develop below −0.2 V (vs. Ag/AgCl). Since Ru-red undergoes irreversible decomposition into the mononuclear complexes via the reduced state (Ru^III-Ru^III-Ru^III) (∼−0.1 V), it is suggested that the electrocatalysis originates from the decomposed species (initial active species: Ru^II(NH₃)₅(OH₂) and Ru^II(NH₃)₄(OH₂)₂) rather than from the Ru-red. Although the present electrocatalyst was also applied to H₂O₂ reduction system, the catalytic activity was found to be poor from the voltammetric behavior. It appeared that the kinetics of the electrocatalysis is much faster in the O₂ reduction than in the H₂O₂ one. A selective and direct catalysis for O₂ reduction into H₂O was suggested from a ring-disk voltammogram to take place by an aggregate of the mononuclear ruthenium complexes in the polymer matrix. In addition, it was found that electrocatalytic O₂ reduction involves a slow kinetic process, so that factors affecting the overall kinetics were discussed in terms of the catalysis mechanism.     

Toughening of cycloaliphatic epoxy resins by poly(ethylene phthalate) and related copolyesters

Poly(ethylene phthalate) (PEP) and poly(ethylene phthalate–co‐ethylene terephthalate) were used to improve the brittleness of the cycloaliphatic epoxy resin 3,4‐epoxycyclohexylmethyl 3,4‐epoxycyclohexane carboxylate (Celoxide 2021?), cured with methyl hexahydrophthalic anhydride. The aromatic polyesters used were soluble in the epoxy resin without solvents and effective as modifiers for toughening the cured epoxy resin. For example, the inclusion of 20 wt % PEP (MW, 7400) led to a 130% increase in the fracture toughness (K_IC) of the cured resin with no loss of mechanical and thermal properties. The toughening mechanism is discussed in terms of the morphological and dynamic viscoelastic behaviors of the modified epoxy resin system. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 388–399, 2002; DOI 10.1002/app.10363     

Dietary conjugated linolenic acid in relation to CLA differently modifies body fat mass and serum and liver lipid levels in rats

The present study compared the effect of dietary conjugated linolenic acid (CLNA) on body fat and serum and liver lipid levels with that of CLA in rats. FFA rich in linoleic acid, α-linolenic acid, CLA, or CLNA were used as experimental fats. Male Sprague-Dawley rats (4 wk old) were fed purified diets containing 1% of one of these experimental fats. After 4 wk of feeding, adipose tissue weights, serum and liver lipid concentrations, serum tumor necrosis factor (TNF)-α and leptin levels, and hepatic β-oxidation activities were measured. Compared with linoleic acid, CLA and, more potently, CLNA were found to reduce perirenal adipose tissue weight. The same trend was observed in the weight of epididymal adipose tissue. CLNA, but not CLA, was found to significantly increase serum and liver IG concentrations. Serum FFA concentration was also increased in the CLNA group more than in the other groups. The activity of β-oxidation in liver mitochondria and peroxisomes was significantly higher in the CLNA group than in the other groups. Thus, the amount of liver TG exceeded the ability of hepatic β-oxidation. Significant positive correlation was found between the adipose tissue weights and serum leptin levels in all animals (vs. perirenal: r=0.557, P<0.001; vs. epididymal: r=0.405, P<0.05). A less significant correlation was found between adipose tissue weights and serum TNF-α level (vs. perirenal: r=0.069, P<0.1; vs. epididymal: r=0.382, P<0.05). Although the mechanism for the specific effect of CLNA is not clear at present, these findings indicate that in rats CLNA modulated the body fat and TG metabolism differently from CLA.     

Oxidative coupling of methane over LaCoO3−δ-based mixed oxides

The catalytic activity of LaCoO_3–-based mixed oxides for the oxidative coupling of methane has been tested by TPR and cyclic reaction. Characterization has been done by XRD, TGA and Mössbauer spectrometry. It is likely that the perovskite-crystal structure containing hypervalent metal ions has an important role and that unique structural oxygen species in the perovskite contribute to the partial oxidation of methane.