Study of melting and crystallization behavior of polyacrylonitrile using ultrafast differential scanning calorimetry

The thermal behavior of polyacrylonitrile (PAN) has been investigated using X-ray diffraction, differential scanning calorimetry (DSC), and ultrafast DSC. In conventional DSC, it is difficult to prevent the concurrent occurrence of the exothermic reactions of PAN with melting. However, in the ultrafast DSC curve, the exothermic peak due to these reactions disappears over the temperature range 0–400 °C at heating rates above 250 °C s⁻¹. Alternatively, the glass transition and the melting of PAN are observed over the temperature range 109–129 °C and 335–362 °C, respectively. Moreover, upon cooling from the molten state at a rate of −7500 °C s⁻¹, PAN crystallization is observed at 204 °C. These findings were observed repeatedly during heating and cooling measurements. From the extrapolation analysis, the zero-entropy-production melting temperature of PAN is found to lie in the temperature range 320–350 °C. Finally, the equilibrium melting temperature of PAN is estimated to be ca. 465 °C.     

Thermal Analysis for Package Cooling Technology Using Phase-Change Material by Using Thermal Network Analysis and CFD Analysis With Enthalpy Porosity Method

This paper describes a transient cooling technology for electronic equipments using phase-change material (PCM). The module is made of low-cost materials, yet it is designed to achieve a reasonably high level of heat transfer performance. Paraffin is used as the PCM. In previous our report, we can estimate the cooling performance of PCM by using a thermal network method, which cannot calculate melted PCM flow. In this paper, we consider the heat transfer phenomena of PCM module more deeply by using computational fluid dynamics (CFD) analysis with an enthalpy porosity method. By using this method, we can calculate phase-change phenomena and flow phenomena of melted PCM with CFD analysis. First, we briefly explain the results of the experiment and the thermal network analysis. Then we describe the details of CFD analysis with the enthalpy porosity method. In this calculation, melted PCM flow and heat absorption of latent heat can be analyzed. Therefore, we can discuss the reason why the thermal network analysis can estimate cooling performance of PCM module without dealing with melted PCM flow. The calculation results showed that natural convective flow of melted PCM affects the cooling performance of the PCM module. In the case where the PCM module is set vertically, high temperature and low temperature locations exist on the substrate. If several devices are cooled with the PCM module, device consuming the most power must be set in the lower part of the PCM module. From these results, we can conclude that no natural convective flow occurs in our experiment due to the shape of the PCM module.     

Exploration on efficient similar sentences extraction

Measuring the semantic similarity between sentences is an essential issue for many applications, such as text summarization, Web page retrieval, question-answer model, image extraction, and so forth. A few studies have explored on this issue by several techniques, e.g., knowledge-based strategies, corpus-based strategies, hybrid strategies, etc. Most of these studies focus on how to improve the effectiveness of the problem. In this paper, we address the efficiency issue, i.e., for a given sentence collection, how to efficiently discover the top-k semantic similar sentences to a query. The previous methods cannot handle the big data efficiently, i.e., applying such strategies directly is time consuming because every candidate sentence needs to be tested. In this paper, we propose efficient strategies to tackle such problem based on a general framework. The basic idea is that for each similarity, we build a corresponding index in the preprocessing. Traversing these indices in the querying process can avoid to test many candidates, so as to improve the efficiency. Moreover, an optimal aggregation algorithm is introduced to assemble these similarities. Our framework is general enough that many similarity metrics can be incorporated, as will be discussed in the paper. We conduct extensive experimental evaluation on three real datasets to evaluate the efficiency of our proposal. In addition, we illustrate the trade-off between the effectiveness and efficiency. The experimental results demonstrate that the performance of our proposal outperforms the state-of-the-art techniques on efficiency while keeping the same high precision as them.     

Pulverization mechanism of hydrogen storage alloys on microscale packing structure

In-situ and transient visualizations of the packing structure of a hydrogen storage alloy bed are carried out using an X-ray computed tomography (CT) system. The packing structure is clearly observed on the microscale using the CT system. When the alloy bed is subjected to hydrogen absorption–desorption cycles, the pulverization progresses from the lower to the upper regions of the bed. After several hydrogen absorption–desorption cycles, the packing structure in the lower region of the bed changes and the microstructural void decreases slightly. Based on these results, we propose a pulverization mechanism of the packed bed in which the friction between particles affects the pulverization process.     

Characterization of alternative plasticizers in poly(vinyl chloride) sheets for blood containers

This study aimed to optimize the ratio of dioctyl 4‐cyclohexene‐1,2‐dicarboxylate (DOTH) and di‐isononyl‐cyclohexane‐1,2‐dicarboxylate (DINCH^®) for use as plasticizers in poly(vinyl chloride) (PVC) sheets. We also evaluated the biological safety of DOTH for its potential to be part of a safe PVC‐based blood container. The suppression of hemolysis in mannitol‐adenine‐phosphate / red cell concentrates (MAP/RCC) with DOTH/(DINCH^®‐PVC) sheets and the elution of plasticizers from the sheets increased with higher DOTH compositions. The properties of the PVC sheet containing DOTH and DINCH^® in the ratio of 25:33 parts against PVC 100 parts as a weight were almost identical to the PVC sheet made of di(2‐ethylhexyl) phthalate. From a subchronic toxicity test, DOTH did not show any adverse effects on all organs, including the testes, epididymis, liver, and kidneys. The no‐observed‐adverse‐effect level was 300 mg/kg body weight/day in a rat. These results suggest that DOTH/DINCH^® (25:33) is a promising candidate for the replacement of di(2‐ethylhexyl) phthalate in blood containers. J. VINYL ADDIT. TECHNOL., 22:520–528, 2016. © 2015 Society of Plastics Engineers     

A Moment Method of the Log-Normal Size Distribution with the Critical Size Limit in the Free-Molecular Regime

The present work proposes new formulations of the moment in the free-molecular size regime involving (1) boundary equations at the critical size for evaporation, condensation, and nucleation, and (2) b coefficient functions for coagulation that are improved by two parameters (standard deviation and nondimensional critical size). Using these formulations based on the error function, the critical particle size is readily introduced into the log-normal moment method for applications in general aerosol dynamics. In the situation that the particle size distribution is located near the critical size, the proposed moment method (which considers the critical size limit) improves predictions of total particle number and particle volume concentrations as compared with previously well-used log-normal moment methods for sizes ranging from 0 to ∞. However, as the size distribution approaches to the continuum size regime, the influence of the critical size becomes smaller. Thus, the new formulations are expected to improve microphysical parameterization in the free-molecular regime in aerosol-transport models.

Copyright 2014 American Association for Aerosol Research     

Mechanism of enhanced impact strength of poly(vinyl chloride) modified by acrylic graft copolymer

The mechanism of enhanced PVC impact strength of poly(vinyl chloride) modified by an acrylic graft copolymer was studied by the three-point bending test on a U-notched bar. In the mechanism, the void formation from the modifier released the constrained strain. The release suppresses the stress below the fibril strength in the material; consequently, stable deformation can develop over a large area and, thus, the impact strength of PVC modified by the acrylic graft copolymer is improved. © 1996 John Wiley & Sons, Inc.