Flexible and Conductive 3D Printable Polyvinylidene Fluoride and Poly(N,N‐dimethylacrylamide) Based Gel Polymer Electrolytes

In this work, 3D printable gel polymer electrolytes (GPEs) based on N,N‐dimethylacrylamide (DMAAm) and polyvinylidene fluoride (PVDF) in lithium chloride containing ethylene glycol solution are synthesized and their physicochemical properties are investigated. 3D printing is carried out with a customized stereolithography type 3D gel printer named “Soft and Wet Intelligent Matter‐Easy Realizer” and free forming GPE samples having variable shapes and sizes are obtained. Printed PVDF/PDMAAm‐based GPEs exhibit tunable mechanical properties and favorable thermal stability. Electrochemical proprieties of the printed GPEs are carried out via impedance spectroscopy in the temperature range of 25–90 °C by varying PVDF content. Ionic conductivity as high as 6.5 × 10^?4 S cm^?1 is achieved at room temperature for GPE containing low PVDF content (5 wt%) and conductivity of the GPEs is increased as temperature rises.     

Grafting of poly(ethylene-block-ethylene oxide) onto a vapor grown carbon fiber surface by γ-ray radiation grafting

To modify the surface of vapor grown carbon fiber (VGCF), poly(ethylene-block-ethylene oxide) (PE-b-PEO, M_n=1400, PEO content=50 wt%) was successfully grafted onto the surface by using γ-ray irradiation of the PE-b-PEO-adsorbed VGCF in solvent-free system. It is found that the percentage of polymer grafting reached 15.0% when the PE-b-PEO-adsorbed VGCF was irradiated by γ-ray over 40 kGy dose at 110 °C, but at the lower irradiation temperature of 75 °C, the grafting reaction scarcely proceeded. This indicates that polymer radicals formed by γ-ray irradiation were successfully trapped by VGCF surface above melting point of PE-b-PEO. On the other hand, when the dispersion of VGCF in THF solution of PE-b-PEO was irradiated, the percentage of PE-b-PEO grafting was less than 4.0%. It was confirmed by a field-emission scanning electron microscope (FE-SEM) that the surface of the VGCF was uniformly covered by grafted PE-b-PEO. In addition, the surface free energy of ungrafted and PE-b-PEO-grafted VGCF was determined.     

An Additional Insight into the Correlation between the Distribution Ratios and the Aqueous Acidity of the TODGA System

Abstract

Extraction of Eu(III) and Am(III) from HNO₃ into the organic solvents using N,N,N′,N′‐tetraoctyl‐diglycolamide (TODGA) was investigated in order to study the detailed extraction reaction. The chemical species: 1:2 for metal:TODGA complex is present in polar diluents. On the other hand, the metal complexes need three or more TODGA molecules to remain stable in non‐polar diluents. The HNO₃ concentration dependence on the distribution ratio suggests that HNO₃ participates in the metal extraction. Infrared spectra indicate that the carbonyl oxygen coordinates with Eu(III), and luminescence lifetimes suggest that there are no water molecules in the inner coordination sphere of the extracted Eu‐complex.     

Determination of number-average and weight-average molecular weights of polymer sample from diffusion and sedimentation velocity measurements in theta solvent

Several methods to determine number-average molecular weight M_n and weight-average molecular weight M_w, of a polymer sample are proposed from diffusion and sedimentation velocity measurements at the θ point. According to these methods, M_n and M_w are determined from the diffusion constant vs. molecular weight relationship, and also from the equations of Svedberg and Flory–Mandelkern, using the 2nd-order and the –2nd-order diffusion constants. These methods have been applied to four samples of polydisperse polystyrene in the θ solvent, cyclohexane at 35°C. It was experimentally ascertained that M_n and M_w of each sample determined by the present methods were in good agreement with the results of column fractionation, light scattering, and calculated values from molecular weight distribution curve within experimental errors. It is concluded that the present methods are useful for determining M_n and M_w, since the reliabilities of M_n and M_w values, which are fundamental quantities of polymer characterization, can be raised by comparing the experimental data observed by conventional methods such as osmotic pressure, light scattering, and the Archibald method with those observed by the present methods.     

Hydrogen and carbon dioxide adsorption with tetra‐n‐butyl ammonium semi‐clathrate hydrates for gas separations

Gas adsorption rates of H₂, CO₂, and H₂‐CO₂ gas mixture (H₂/CO₂ = 3.4) with tetra‐n‐butyl ammonium salt (bromide, chloride, and fluoride) semi‐clathrate hydrate particles were measured at 269 K to assess their properties for gas separation. Equilibrium gas occupancies in the S‐cages of the particles were in order of (high to low) for hexagonal structure‐I, tetragonal structure‐I, and superlattice of cubic structure‐I structures with the maximum fractional occupancy by CO₂ being about 40%. The CO₂ diffusion rate depended on the anion size of the salt, which is attributed to distortion of the S‐cage that is close to the molecular size of CO₂. Simulations of semi‐clathrate hydrate particles with theory showed that H₂/CO₂ selectivities could be as high as 36 (3.0 mol% TBAF) and that selectivities for an ideal membrane (3.3 mol% TBAF) could be >100 (269 K, 0.3–4.5 MPa). Semi‐clathrate hydrates have wide application as separation media for gas mixtures. © 2014 American Institute of Chemical Engineers AIChE J, 61: 992–1003, 2015     

Corrosion characteristics of reduced activation ferritic steel, JLF-1 (8.92Cr–2W) in molten salts Flibe and Flinak

Static corrosion tests were performed in molten salts, LiF–BeF₂ (Flibe) and LiF–NaF–KF (Flinak), at 500 °C and 600 °C for 1000 h. The purpose is to investigate the corrosion characteristics of reduced activation ferritic steels, JLF-1 (8.92Cr–2W) in the fluids. The concentration of hydrogen fluoride (HF) in the fluids was measured by slurry pH titration method before and after the exposure. The HF concentration determined the fluoridation potential. The corrosion was mainly caused by dissolution of Fe and Cr into the fluids due to fluoridation and/or electrochemical corrosion. Carbon on the surface might be dissolved into the fluids due to the corrosion, and this resulted to the decrease of carbide on the surface. The corrosion depth of the JLF-1 specimen, which was obtained from the weight losses, was 0.637 μm in Flibe at 600 °C and 6.73 μm in Flinak at 600 °C.     

Carrier Transport and Optical Properties of InGaN SQW With Embedded AlGaN$delta$-Layer

We investigate the carrier transport and optical properties of a thick InGaN single quantum well (SQW) where an AlGaN delta-layer is embedded. By way of simulation, it is found that the carrier density distribution in the active region is more uniform in such a QW structure, compared to a double QW (DQW) configuration showing a discontinuity in the hole quasi-Fermi level due to the large effective mass of the holes along with the strong piezoelectric field. Through the photoluminescence (PL) measurements, we have shown that the PL peak energy varies depending sensitively on the delta-layer thickness, providing an extra degree of freedom in the wavelength-tuning control. In particular, such a QW structure is highly desired for long-wavelength emission as the wavelength tuning can be achieved with lower indium composition. The embedded delta-layer also increases the wave function overlap between holes and electrons, thereby shortening the PL lifetime. The results of PL measurements are shown to be consistent with the self-consistent numerical results. A possible application of the proposed QW structure is to the design of long-wavelength light-emitting diodes and laser diodes     

Simultaneous design of the sensory morphology and controller of mobile robots

This paper proposes a method for automatic design of the sensory morphology of a mobile robot. The proposed method employs two types of adaptations, ontogenetic and phylogenetic, to optimize the sensory morphology of the robot. In ontogenetic adaptation, reinforcement learning searches for the optimal policy, which is highly dependent on the sensory morphology. In phylogenetic adaptation, a genetic algorithm is used to select morphologies with which the robot can learn tasks faster. Our proposed method was applied to the design of the sensory morphology of a line‐following robot. We performed simulation experiments to compare the design solution with a hand‐coded robot. The results of the experiments revealed that our robot outperformed the hand‐coded robot in terms of the following accuracy and learning speed, although our robot had fewer sensors than the hand‐coded one. We also built a physical robot using the design solution. The experimental results revealed that this physical robot used its morphology effectively and outperformed the hand‐coded robot. © 2010 Wiley Periodicals, Inc. Electr Eng Jpn, 172(1): 48–57, 2010; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20965     

LiErO2 formation on Er2O3 in static and natural convection lithium

Er₂O₃ is candidate material for insulating coating to prevent the magnetohydrodynamic (MHD) pressure drop in the self-cooled liquid Li blanket system. Although Er₂O₃ is stable material, detailed chemical behavior in liquid Li is not clear. Corrosion behavior of bulk Er₂O₃ in Li is investigated in static and flowing condition in the present study. After these tests, good compatibility of Er₂O₃ was confirmed and slight formation of LiErO₂ was detected by XRD analysis. This chemical behavior did not change in a static and flowing tests, however some of the corrosion product of LiErO₂ was removed easily by the Li flow. Intensity of LiErO₂ peaks in XRD spectrum suggests that the temperature gradient may affect the reaction rate in the natural convection loop. Since corrosion rate of Er₂O₃ is very small, slight change in state will be important information to evaluate lifetime of coating.     

High‐current lightning discharges in winter

Lightning electric‐field waveforms related to power line faults in winter have been identified. Most of those waveforms appear to be associated with upward lightning discharges with absolute peak currents of over 100 kA. They are quite different from common return‐stroke waveforms, and the lightning discharges which produce these characteristic waveforms are called GC (Ground to Cloud) flashes. These high‐current lightning discharges are distributed around the coastline in different ways depending on their polarities. The spatial distributions of high‐current lightning discharges around Japan are also investigated. It is revealed that the region of Honshu Island along the coastline of the Sea of Japan belongs to the area in which the density of high‐current lightning flashes is the highest in Japan through the year. © 2009 Wiley Periodicals, Inc. Electr Eng Jpn, 170(1): 8–15, 2010; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20874