Practical Application of ±250‐kV DC‐XLPE Cable for Hokkaido–Honshu HVDC Link

The long‐term dc properties of DC‐XLPE insulation materials, which have been developed for dc use, were investigated. It was found that the lifetime of DC‐XLPE under dc voltage application is extended by the addition of nano‐sized filler. The time dependence of the space charge distribution at 50 kV/mm was observed for 7 days. Almost no accumulation of space charge in DC‐XLPE was found. The 250‐kV DC‐XLPE cables and accessories were manufactured and subjected to a type test and PQ test for use in the Hokkaido–Honshu dc link facility owned by the Electric Power Development Co., Ltd. These tests were performed under conditions that included a polarity reversal test for line commutated converter (LCC) systems as recommended in CIGRE TB 219. The test temperature was 90 °C. The type test and PQ test were successfully completed. The DC‐XLPE cable and accessories were installed in summer 2012 for the Hokkaido–Honshu dc link. After the installation of the dc extruded cable system, a dc high‐voltage test at 362.5 kV (=1.45 PU) for 15 min was successfully completed in accordance with CIGRE TB 219. This dc extruded cable system was put into operation in December 2012 as the world's highest‐voltage extruded dc cable in service and the world's first dc extruded cable for a LCC system including polarity reversal operation.     

Frequency of Upward Lightning Hits to Wind Turbines in Winter

In recent years, frequent damage to wind turbines by winter lightning has been reported in the region along the Sea of Japan. It is a serious finding that lightning hits concentrate on wind turbines in this region. The authors investigated the increase rate of the frequency of lightning hits on wind turbines due to wind turbine construction by using LLS (lightning location system) data. As a result, an experimental formula to estimate the increase rate of the frequency of lightning hits on wind turbines as a function of parameters related to the construction conditions, namely the height of wind turbines, the height above sea level, and the latitude, is proposed.     

Chlorine Gas Sensing Properties of ZnO-CaO Ceramics

The chlorine gas sensing properties of pure ZnO (PZ) and CaO-added ZnO (CAZ) ceramics with relative densities of 48–65% were investigated from 25–380°C in Cl₂ concentration range from 0.9 ppm to 20 ppm using air or N₂ as a carrier gas. In the entire temperature range, the conductivity of PZ and CAZ ceramics decreased by introducing Cl₂ gas. 3 mol% CAZ showed a Cl₂ sensitivity ((0)/(Cl₂)) of 10 for 0.9 ppm Cl₂ in air at 300°C, suggesting its usefulness for sensing of a low-concentration Cl₂ gas below 1 ppm. The CaO addition was found to decrease the Cl₂ sensitivity but to improve the recovery process after removing Cl₂ gas. These effects are attributed to changes in the amount and stability of adsorbed oxygen and to subsequent changes in Cl₂ adsorption behavior.     

Improvement of production efficiency of spray-synthesized HKUST-1

Spray synthesis of metal–organic frameworks (MOFs) is desirable for scaled production. In this study, we designed a new apparatus for spray-synthesizing MOFs, wherein an upward spraying and swirling air flow was applied to prevent loss of the precursor solution. We evaluated the effects of the flow rate and temperature of swirling air, temperature of the reactor tube, initial feed rate of the precursor solution, and precursor concentration on the yield, purity, space–time yield (STY), BET surface area, and average particle size. The swirling air flow along with re-spraying of the solution accumulated on the upward spray nozzle improved yield significantly. The highest STY was 45.7 kg/m³/day obtained at a precursor feed rate of 5 mL/min; the highest surface area was 1,872 m²/g obtained at a precursor concentration of 1.38 mol/L. The sample with the highest surface area exhibited 2.60 wt% of hydrogen adsorption capacity at 77 K and 1 bar, with 7.6–6.1 kJ/mol of heat of hydrogen adsorption.     

Review of various measurement methodologies of migration ion influence on LCD image quality and new measurement proposal beyond LCD materials

Nowadays, thin‐film transistor liquid crystal displays (TFT‐LCDs) have realized high reliability of display characteristics by improving liquid crystal (LC) materials and cell fabrication processes. In order to improve display reliability, measurement methodologies are important to see the progress of improvement of materials and processes; thus, our group has proposed voltage holding ratio (VHR), ion impurity, residual direct current (DC) and elastic constants for LC cells, and the optical anisotropy of an alignment layer on indium tin oxide (ITO) glass substrate for LCD industry. In case of an ion impurity, we have succeeded in measuring the ion impurity amount in TFT‐LCD. Furthermore, we have recently proposed ion impurity measurement methodology for beyond LCD applications that are organic light emitting diode (OLED) and organic photovoltaics (OPV). In this review, I introduce each measurement methodology for LCDs and beyond LCDs in detail.     

Structural characterization of photoreduced complete and incomplete cubane-type molybdenum oxide clusters in CO and their catalytic behavior in propene metathesis reaction

SiO2-impregnated complete and incomplete cubane-type molybdenum oxide clusters such as [(RhCp*)₄Mo₄O₁₆] (I) and [(RhCp*)₂Mo₃O₉(OMe)₄] (II) were photoreduced with a UHP-Hg lamp (> 365 nm) in CO, resulting in the formation of catalytically active species for propene metathesis at 300 K. The CO-photoreduced Mo oxide clusters were characterized by EXAFS, IR, XPS and TPD technique. The results suggest that the Mo-O_4c (four-centered bridging oxygens) in I were specifically reduced with CO under the illumination to produce two sets of subcarbonyl species, e.g., those characteristic of the IR bands at 2061 and 2021 cm^–1, which were thermally inactive for the¹³CO exchange reaction but very active under illumination at 300 K, possibly assignable to Mo(CO)x (x = 2, 3), whereas those at 2092 and 2035 cm^–1 due to Rh(CO)₂, which were readily exchangeable with¹³CO at 300 K in dark. Removal of both carbonyls attached on Rh and Mo in photoreduced I and II by evacuation at 375–440 K led to the formation of oxygen-deficient Mo⁴+/Mo⁵⁺ sites, which exhibited high catalytic activities in propene metathesis at 300 K to produce an equimolar mixture of ethene and 2-butenes. The CO-photoreduced incomplete cubane Mo oxide cluster (II) exhibited higher activities and higher trans/cis ratios of 2-butenes in the reaction, compared with those on the photoreduced I.     

Dehydrogenation of Cyclohexane Over Ni Based Catalysts Supported on Activated Carbon using Spray-pulsed Reactor and Enhancement in Activity by Addition of a Small Amount of Pt

The polycrystalline silver after pre-treated with oxygen at high temperature was found to show excellent activity and selectivity in the process of direct dehydrogenation of methanol to anhydrous formaldehyde and the active oxygen species for this reaction was observed and proposed as the active centeres with in situ Raman scattering.     

Colour and Constitution of 1,4-Naphthoquinonoid Dyes - Modified PPP MO Calculations and Substituent Effects

Calculation of the n-electron excitation energies of naphthoquinonoid dyes has been carried out by means of the Pariser—Parr—Pople (PPP) method using the variable, β,γ-approximation. A good linear correlation between the observed and calculated values for the first π-π* excitation was found for a new series of naphthoquinonoid dyes. The effect of substituents on the colour of different dyes was studied on the basis of these calculated results, i.e. HOMO—LUMO energy levels and π-electron-density changes accompanying the excitation. The intramolecular charge-transfer character of the π-π* transition was shown to be the same as occurs in some anthraquinonoid dyes.     

Electrodeposition of amorphous gold alloy films

The process for electroplating amorphous gold-nickel-tungsten alloy that we developed previously based on the addition of a gold salt to a known amorphous Ni-W electroplating solution was investigated further using the X-ray diffraction (XRD) method for the purpose of quickly surveying the effects of various experimental variables on the microstructure of the alloy. In this system the gold concentration in the plating bath was found to be critical; i.e., when it is either very low or very high, the deposit becomes crystalline to XRD. The deposit composition varies linearly with the mole ratio of Au to Ni in solution, and the alloy deposit is amorphous to XRD when the atomic ratio of Au/Ni in the deposit is between 0.5 and 1.5. At suitable concentrations of the metal ions, the deposit contains essentially no tungsten. By extending the work on the Au-Ni-W system, an amorphous Au-Co alloy plating process was also developed.