Absorption spectra and tautomerism of aminonaphthazarins

2-n-Butylaminonaphthazarin (2) absorbs at 499 and 532 nm in ethanol but at 539 and 577 nm in alkali solution, while 2, 6-bis(n-butylamino)naphthazarin (3) absorbs at 461, 500 and 540 nm in ethanol but at 511 and 545 nm in alkali solution, with only a small bathochromic shift of 5 nm. The absorption curve of 3 was changed by addition of alkali and the λD_max at around 461 nm completely disappeared. In the case of 2-bromo-3, 6-bis(n-butylamino)naphthazarin (4), tautomerism between the 1, 4-quinone and 1, 5-quinone forms was observed and the isosbestic point was observed at 480 nm. Dye 2 easily deprotonated to give the 1, 4-dianion, but dyes 3 and 4 existed as tautomeric mixtures in solution and shifted to 1, 5-quinone forms in alkali solution.     

A simple and fast method to disperse long single-walled carbon nanotubes introducing few defects

A simple and fast dispersion method that incorporates heating is used to disperse long (more than 10 μm) single-walled carbon nanotubes (SWCNTs) with minimal defects. The method enables a dispersed solution of SWCNTs to be produced in less than 10 min in only three steps: (1) addition of the dispersant, (2) heating, and (3) grinding. The dispersion method does not require sonication, which shortens the SWCNTs and can generate surface defects. SWCNT films were prepared from the dispersed solution, and the films exhibited a resistance of 380 Ω/sq at a transparency of 64.8%. This dispersion method can be easily scaled up, making it useful for the preparation of dispersed SWCNTs for commercial and industrial applications.     

Production of d-glucose from pseudo paper sludge with hydrothermal treatment

To convert cellulosic organics contained in industrial paper sludge into glucose, reaction of pseudo paper sludge composed of cellulose and inorganic compounds (calcium carbonate (CaCO₃), talc (Mg₃(Si₄O₁₀)(OH)₂), kaolin (Al₂(Si₂O₅)(OH)₄)) under hydrothermal conditions was studied. Significant amounts of glucose (ca. 23%) could be produced from cellulose in the absence of CaCO₃ for reaction in water at 523 K and 12 min reaction time. On the other hand, in the presence of CaCO3, most glucose decomposed over all conditions, whereas the addition of talc and kaolin to the mixtures increased the glucose yield to about 30%. For the case of chemical recycle of paper sludge with hydrothermal treatment to obtain d-glucose, it can be concluded that it is preferable to separate the calcium carbonate from the paper sludge before hydrothermal treatment.     

Fabrication and Mechanical Properties of Continuously Graded MoSi2–ZrO2(2Y) Materials Using Wet-Molding

Continuously graded MoSi₂-ZrO₂(2Y) materials with high density (97.5% of theoretical) have been fabricated by uniaxial wet-molding, followed by hot pressing (1000°C/1 h/30 MPa) and hot isostatic pressing (1400°C/2 h/196 MPa). Their composition profiles are greatly influenced by the viscosity of mixed solutions of glycerin and ethanol used as a dispersion medium; a linear compositional gradient from MoSi₂/ZrO₂(2Y) 70/30 to 20/80 mol% is obtained from the solution (50/50 vol%) with a viscosity of 20 mPa s. Vickers hardness (Hv) and fracture toughness (KIC) increase from 9.7 to 12.4 GPa and from 5.1 to 12.5 MPa m1/2, respectively, with increasing ZrO₂(2Y) composition.     

Osteoinduction by Functionally Graded Apatites of Bovine Origin Loaded with Bone Morphogenetic Protein-2

Bioresorbable and functionally graded apatites (fg-HAp) ceramics, which are characterized by gradations in crystallinity and the grain size of hydroxyapatite (HAp:Ca₁₀(PO₄)₆(OH)₂), were designed using bovine bone by the calcination and partial dissolution–precipitation method. The fg-HAp ceramics had macropores of 100–600 μm originated from spongy bone, and micropores of 10–160 nm. Fg-HAp ceramics loaded with recombinant human bone morphogenetic protein-2 (rhBMP-2/fg-HAp) were implanted into the subcutaneous tissue of rats. Eight weeks after the implantation, the surface and bulk degradations of the fg-HAp-containing body fluid occured, and small pieces of fg-HAp were incorporated into the induced bone and fatty marrow, suggesting that osteoinduction occurred in conjunction with bone remodeling. The rhBMP-2/fg-HAp ceramics developed could become a resorbable biomimetic material with fast bioresorption and osteoinduction characteristics.     

Preparation of highly mesoporous carbon membranes via a sol-gel process using resorcinol and formaldehyde

This paper reports the preparation of highly mesoporous carbon membranes, which are obtained by the pyrolysis of sol-gel derived mesoporous polymer membranes using resorcinol and formaldehyde (RF). Two series of RF carbon membranes were prepared by changing the resorcinol to catalyst molar ratio. The nitrogen adsorption-desorption measurement shows that the RF carbon membranes possess a well-developed mesoporous structure with controlled pore diameters of 5.48 nm and 13.9 nm. The helium and nitrogen permeances of both RF carbon membranes were independent of the feed pressure, indicating that there was no contribution of viscous flow and the membranes are initially crack-free. The gas permeation result showed that the dominant mechanism of gas transport through both the RF carbon membranes is Knudsen diffusion. With regard to the permeation of condensable gases such as CH₄ and CO₂, it was observed that the surface flow also contributes to the total permeation.