Pb-free surface-finishing on electronic components’ terminals for Pb-free soldering assembly

Pb-free solderable surface finishing is essential to implement Pb-free solder assembly in order to meet with the growing demand of environmental consciousness to eliminate Pb from electronic products. Two types of widely applicable Pb-free surface finishing technologies are developed. One is the multilayer-system including Pd with Ni undercoat. Heat-resistance of Pd enables whole-surface-plating on to leadframe before IC-assembling process. The other is the double-layer-system with low-melting-point-materials, for example, thicker Sn underlayer and thinner Sn-Bi alloy overlayer, dilutes Sn-Bi alloy’s defects of harmful reactivity along with substrate metal and mechanical brittleness with keeping its advantages of solder-wettability and no whisker.     

High Field ESR System and Its Application to the Study of Quantum Spin Systems

Developments of the high field ESR system in Kobe University is presented. Using Gunn oscillators and backward traveling oscillators (BWO), we can cover the frequency region from 30 to 1183.6 GHz with the use of InSb detector. Pulsed magnetic field up to 30 T is available and we are now trying to extend the field up to 40 T. Temperature range is from 1.8 to 300 K. Using this system, we studied S=1/2 ladder like system Cu₂(C₅H₁₂N₂)₂Cl₄, and found a new magnetic transition at 10.1 T at 1.8 K. The temperature dependence of ESR in Cu₂(C₅H₁₂N₂)₂CI₄ shows g-shift below 8 K which corresponds to the maximum of the magnetic susceptibility. The g-shift below 8 K suggests the increase of the quantum fluctuation in the system, and the role of the quantum fluctuation in Cu₂(C₅H₁₂N₂)₂CI₄ is discussed.     

Reactivity of layered vanadium pentoxide hydrate with ultrafine metal oxide, TiO2 and ZrO2, particles in an aqueous system

The interactions between vanadium pentoxide hydrate (V₂O₅·nH₂O) sol and colloid solutions of ultra fine titanium dioxide TiO₂ and zirconium dioxide particles ZrO₂ were studied. When mixed with an intrinsic V₂O₅·nnH₂O sol, TiO₂ particles in the mixed sol are sandwiched by V₂O₅·nH₂O layer sheets to form intercalation compounds. An Interlayer distance of V₂O₅·nH₂O was increased by this treatment and the surface area was also increased from 7.9 m² g^–1 for the V₂O₅·nH₂O to ca. 50 m² g^–1. When the TiO₂ sol was contacted with K-type V₂O₅·nH₂O, microporous nature appeared in the sample and the surface area incrased up to ca. 100 m² g^–1. The porous structure was maintained up to 300°C, above which materials were separated into two phases, anhydrous V₂O₅ and anatase type TiO₂. Ultrafine ZrO₂ particles were intercalated stoichiometrically in both intrinsic and K-type V₂O₅·nH₂O giving ZrO₂-V₂O₅·nH₂O for all the mixing ratios from ZrO₂/V₂O₅ = 5 to 20. Physico-chemical properties were almost unvaried and the materials were nonporous. Their surface areas are around 50 m² g^–1 for the former and around 60 m² g^–1 for the latter. The layered structure was maintained up to 300°C above which the sample was crystallized into ZrV₂O₇. The reaction temperature is about 150°C lower than that the heated mixture of ZrO₂ and V₂O₅ powders. The electron microscope observations of the prepared materials showed that the number of the stacked layers was decreased from more than 10 sheets for the sample before intercalation to about 2–4 sheets by exfoliation. This indicates that V₂O₅·nH₂O is exfoliated by ion exchangeably reacting to ultrafine titanium oxide and zirconium oxide particles.     

Health-monitoring technologies for alumina-fiber-reinforced plastics

Transmitted light could detect matrix cracks that occurred in the early stages of fracture of alumina-fiber-reinforced plastics (alumina-FRPs); these cracks could not be detected by acoustic emission (AE). An optical-fiber Bragg grating (FBG) sensor could detect the matrix cracks but it must be embedded in the FRPs. To determine which wavelength is sensitive to the defects in the FRP, the spectra of the transmitted and reflected light were measured. The intensity of the transmitted light, especially in the visible region (wavelength: 400–800 nm), decreased as the bending stiffness of the test piece decreased. It is thus concluded that to monitor the decrease in bending stiffness of FRPs, a simple sensor using a visible ray is good enough. And this transmitted-light NDE technique can work in the strong electromagentic field associated with a superconductor. It will therefore be useful for detecting defects in the FRP of the load-support system in service.     

Simple digitally programmable attenuator using FG-MOSFETs

A very simple digitally programmable attenuator using FG-MOSFETs (floating-gate MOSFETs) is presented. HSPICE simulations of the circuit demonstrate a THD of less than -32 dB and a variable gain range of -13 to -31 dB with a supply voltage of ±1.5 V, load resistance of 10 kΩ and input signal of 3 V_p-p     

A stochastic damage accumulation model for crack initiation in high-cycle fatigue

A stochastic damage accumulation model for crack initiation in high-cycle fatigue is proposed. It is assumed that the fatigue damage is accumulated in the form of dislocations under the repeated stress and that the slip band crack is initiated when the strain energy due to a local pile-up of dislocations exceeds a critical value. The size of an initiating crack is the cell size, derived from a probabilistic argument and its depth is determined in relation to the stored dislocation energy. Our theoretical results are compared with the experimental data from a low-carbon steel S20C in order to examine the consistency of our model.     

Estimating reflection parameters from a single color image

This article proposes a method for estimating various parameters of a reflection model from a single color image of an object. We used an RGB charge-coupled device (CCD) camera for imaging and parameter estimation. We assumed the object surface is composed of an inhomogeneous dielectric material and used the Phong model to describe the surface's dichromatic reflection. This approach also generalizes to objects with smooth convex surfaces     

Novel expansion/shrinkage modulation of 2D layered MOF triggered by clathrate formation with CO(2) molecules

Crystal-to-crystal transformation from a 3D interpenetrated-type MOF {[Cu(BF(4))(2)(bpy)(H(2)O)(2)] (bpy)} (1) to a 2D square-grid-type [Cu(BF(4))(2)(bpy)(2)] (2) (bpy = 4,4'-bipyridine) was observed. It was derived from dehydration and confirmed by in situ FT-IR, TG, and elemental analysis. Moreover, we elucidate the novel expansion/shrinkage dynamic modulation of 2 triggered by clathrate formation with gas molecules.     

All-solid-state Z-scheme in CdS-Au-TiO2 three-component nanojunction system

Natural photosynthesis, which achieves efficient solar energy conversion through the combined actions of many types of molecules ingeniously arranged in a nanospace, highlights the importance of a technique for site-selective coupling of different materials to realize artificial high-efficiency devices. In view of increasingly serious energy and environmental problems, semiconductor-based artificial photosynthetic systems consisting of isolated photochemical system 1 (PS1), PS2 and the electron-transfer system have recently been developed. However, the direct coupling of the components is crucial for retarding back reactions to increase the reaction efficiency. Here, we report a simple technique for forming an anisotropic CdS-Au-TiO2 nanojunction, in which PS1(CdS), PS2(TiO2) and the electron-transfer system (Au) are spatially fixed. This three-component system exhibits a high photocatalytic activity, far exceeding those of the single- and two-component systems, as a result of vectorial electron transfer driven by the two-step excitation of TiO2 and CdS.