Experimental study of percutaneous hot ethanol injection therapy (PHEIT) by continuous heating device for hepatocellular carcinoma

Percutaneous ethanol injection therapy (PEIT) is widely used as a local treatment for hepatocellular carcinoma (HCC). However, because only a small amount of ethanol can be used in one PEIT session and because the antitumor effect is limited, this modality is indicated only when there are three or fewer tumors and when the tumor diameter is < or = 3 cm. To obtain a more potent and certain antitumor effect, we have devised a new treatment called percutaneous hot ethanol injection therapy (PHEIT), and developed a Continuous Heating Device with which ethanol can be heated and locally injected at a specified temperature. The continuous Heating Device is composed of three major components: a syringe heater, a needle thermocontroller, and a needle tip thermosensor. A disposable syringe filled with liquid is inserted into the syringe heater, which heats the liquid to a desired temperature by adjusting the voltage. The needle thermocontroller is a puncture guide needle to which a heating device has been attached. The needle-tip thermosensor constantly measures, displays and records the temperature of the liquid at the needle tip during injection. Also, because the Continuous Heating Device is a closed-circuit system, there is no risk of accidental a fire, which ensures procedural safety. It is also possible to use this device to safely heat and inject a variety of other liquids, such as physiological saline and anticancer agents and thus contribute to the widespread development of ultrasound-guided injection therapy.     

Life Cycle Simulation System for Life Cycle Process Planning

To realize closed loop manufacturing, it is essential to design product life cycles and to plan life cycle processes property. Life cycle simulation has been recognized as an effective tool in this direction. In this paper, we present a life cycle simulation system developed as a general tool for life cycle design and management. The system includes functions for modelling and controlling each life cycle process in a flexible manner. The system maintains usage history of products and parts independently taking the reuse of parts into account. Examples of the simulation are shown for both a rapid life cycle scenario and for a part sharing scenario over the product generations.     

Scalability and homogeneity of slot die‐coated metal oxide semiconductor for TFTs

An indium oxide‐based precursor solution has been developed by spin coating method. In order to apply this material to mass production, material, process, and equipment optimizations for slot die coating have been implemented. Slot die coating is a cost‐effective and scalable process and already applied to photoresist materials in the display industry. The indium oxide‐based precursor solution has been coated on bare glasses and thin‐film transistor substrates by a mass production‐type slot die coater. Mobility of over 10 cm²/Vs is achieved for the first time for a large area at an annealing temperature of 350 °C. The homogeneity of the film will be presented.     

Oxygen permeation mechanism in polycrystalline mullite at high temperatures

The oxygen permeability of polycrystalline mullite wafers, serving as a model environmental barrier coating layer on SiC fiber‐reinforced SiC matrix composites, was evaluated at temperatures above 1673 h with an oxygen tracer gas (¹⁸O₂). Oxygen permeation occurred by grain‐boundary (GB) diffusion of oxygen from the high oxygen partial pressure (high‐Po ₂) surface to the low‐Po ₂ surface, with simultaneous GB diffusion of aluminum in the opposite direction. This GB interdiffusion of both oxygen and aluminum proceeded without acceleration or retardation, maintaining the Gibbs‐Duhem relationship. Oxygen permeation related to the GB diffusion of silicon was negligibly small compared to that generated by aluminum GB diffusion, resulting in decomposition of the mullite near the low‐Po ₂ surface. The GB diffusion coefficients for oxygen in the vicinity of the high‐Po ₂ surface were determined directly from the SIMS‐¹⁸O line profiles along individual GBs, as assessed from cross sections of the exposed wafer. The coefficients thus obtained were comparable to those determined in the absence of an oxygen potential gradient and those calculated from an oxygen permeation trial under the assumption of nearly ionic conductivity.     

Modification of transport properties of ion exchange membranes,XIII. Surface-modified cation exchange membranes prepared from polyamines and a copolymer membrane containing p-stryenesulfonyl chloride

A membrane precursor was prepared by the copolymerization of p-styrenesulfonyl chloride and divinylbenzene in the presence of a poly(vinyl chloride) supported cloth. The surface of the membrane was treated with various amines, and then the sulfonyl chloride groups in the internal part of the membrane were hydrolyzed with an aqueous sodium hydroxide solution in organic methanol or acetone solvent. Hydrolysis conditions were examined for the introduction of the sulfonic acid groups. The membrane modified by ethylenediamine exhibited slightly bipolar properties during the electrodialysis of seawater. Surface-modified membranes using tetraethylenepentamine exhibited excellent monovalent cation permselectivity, low membrane electric resistance, and long performance durability during the electrodialysis of seawater.     

On the force feedback control of a manipulator with a compliant wrist force sensorÜber die druckrückführungs-steuerung eines manipulators mit einem nachgiebigen handgelenk-drucksensor

The force feedback algorithm is presented for the manipulator which consists of a high stiffness position servo system with six-degree of freedom and has a compliant six-component force sensor at its wrist. The obtained algorithm has the following three features. First, this algorithm gives the relation between the position and orientation of the wrist at the present step and that of the wrist to be attained at the next step. Second, an efficient calculation method to obtain each joint movement satisfying this relation is proposed. Third, this algorithm reduces the force feedback control to the position feedback control of each joint in case the force sensor is sufficiently compliant compared with its environment.     

Boiling Feature on a Super Water-Repellent Surface

The boiling feature on a super water-repellent (SWR) surface has been studied. The SWR surface has a coating layer of fine particles of nickel and PTFE. Its contact angle to water is 152°in room temperature. The heat transfer surface is facing upward, and the diameter of the heated section is 17 mm. The boiling feature of this surface is completely different from that of usual surfaces. The stable film boiling occurs in very small superheating, and there is no nucleate boiling region. The bubbles generated on the surface coalesce into a vapor film without departing from the surface. The stable vapor film exists even at a surface temperature below the saturation temperature.     

Internal friction behavior of an unidirectionally solidified Al2O3/YAG eutectic at high temperature

The internal friction behavior of a unidirectionally solidified Al₂O₃/YAG eutectic was examined between room temperature and 1400 °C. No internal friction was observed up to 1200 °C. Above 1200 °C, the internal friction drastically increased with increasing temperature and the number of torsional loading cycles. For the 1400 °C test, the internal friction gradually increased with the number of loading cycles and then saturated after 10³ cycles.     

A salient‐pole synchronous generator with permanent magnets between the field poles

In this paper, a new salient‐pole synchronous generator (SG) termed the PMa‐SG is presented. In the PMa‐SG, permanent magnets (PMs) are placed between the pole shoes to reduce the magnetic saturation in the field poles. By using finite element analysis (FEA), the internal magnetic fields and basic characteristics of a 2.8‐MVA PMa‐SG are compared with those of a conventional SG of the same size, and the reduction effect of the magnetic saturation of the PMs is examined. The FEA simulations are also validated by experiments on a 2.0‐kVA prototype machine. The PMs placed between the pole shoes reduce the magnetic saturation in the pole bodies and pole tips and effectively increase the terminal voltage and output power. © 2010 Wiley Periodicals, Inc. Electr Eng Jpn, 174(4): 58–67, 2011; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.21132