Fabrication of nano-sized oxide composite coatings and photo-electric conversion/electron storage characteristics

Titanium dioxide TiO₂ can be used as a photo-anode to give generated electrons to the metal substrate under illumination. The transition metal oxide such as iron oxide Fe₂O₃ can be used to store electrons generated by the photo-electric conversion function of TiO₂ under the illuminated situation while the electrons are discharged from the transition metal oxide to the metal substrate in the dark. In this paper, coatings of nano-sized composite of TiO₂ and Fe₂O₃ were fabricated by the Warm Spray process, in which the feedstock powder is accelerated by a supersonic gas jet with speed above 1.0 km s^- 1 and temperature between 800 and 2500 K, and then impacted onto the target substrate continuously to form coatings. The coatings of TiO₂ and Fe₂O₃ nano-composite fabricated by Warm Spray showed no thermal deterioration such as phase transformation and particle growth of the feedstock during the spray process. The coatings fabricated by the Warm Spray had larger photo-current and the electron charge/discharge capacity than that by a conventional HVOF process. In addition, these characteristics were improved by decreasing the primary particle size of TiO₂ and Fe₂O₃.     

Thermodynamic,transport and radiation properties of high-temperature CF3I and transient conductance of residual arc sustained in axial CF3I flow

The present paper reports fundamental properties of CF₃I under high-temperature conditions to find out the usefulness of CF₃I as an arc-quenching gas. Firstly, particle compositions of CF₃I were theoretically calculated in a temperature range from 300 to 30 000 K. Secondly, thermodynamic, transport and radiation properties of the CF₃I were also obtained for pressures 0.1–1.0 MPa. Finally, the transient process of a conductance of a residual arc in CF₃I was derived to compare with those in other arc-quenching gases. In addition, an arc extinguishing capability of CF₃I in a thermal re-ignition region was derived to find out whether CF₃I shows a higher capability than CO₂, N₂ and air. © 2006 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

The correlation between the ionic degree of covalent bond comprising polymer main chain and the ionic yield due to mechanical fracture

The mechanical force to polymeric materials in vacuum at 77 K produces mechano radicals, mechano anions and mechano cations due to homogeneous and heterogeneous scissions of the covalent bonds comprising polymer main chain. The ionic degree of the covalent bond was estimated by calculating the “absolute ΔMulliken atomic charge,” which was defined as the difference between the Mulliken atomic charges of the two adjacent atoms comprising the covalent bond of the polymer main chain. The ionic yield of the covalent bond increased with increasing the absolute ΔMulliken atomic charge. The empirical formula for the ionic yield was obtained with the absolute ΔMulliken atomic charge, and indicates that the ionic yield could be estimated from its chemical structure.     

Synthesis of Metastable Tetragonal (t') Zirconia–Ceria Solid Solutions by the Polymerized Complex Method

Homogeneous metastable tetragonal ( t ') solid solutions of ZrO₂— x mol% CeO₂ ( x = 20 and 50) were successfully synthesized by the organic polymerized complex method. The citric acid-ethylene glycol solution containing Zr and Ce ions was polymerized at about 140°C and then heat-treated at about 350°C to obtain a precursor. The black precursor was heated at 450°C and then fired up to 1300° or 1590°C, resulting in the homogeneous solid solutions.     

Promotion of hydrogen permeation on metal-dispersed alumina membranes and its application to a membrane reactor for methane steam reforming

A mesoporous membrane for selective separation of hydrogen was prepared usingthe sol-gel method. Some metal salts such as RuCl₃, Pd(NH₃)₄Cl₂, RhCl₃,, and H ₂PtCl₆, were added to the boehmite sol and coated on a porous alumina substrate before firing at 500°C. It was foundthat the permeability of hydrogen and the separation factor for a hydrogen-nitrogen gaseous mixture of these metaldispersed membranes exceeded the limitations of the Knudsen diffusion mechanism. Although the gas permeation through a neat alumina membrane is governed by the Knudsen diffusion, the metals dispersed in alumina membranes were effective in promoting hydrogen permeation. These metaldispersed alumina membranes were also used in a membrane reactor for methane steam reforming at low temperature. In the temperature range of 300 to 500°C, the membrane reactor attained a methane conversion twice as high as the equilibrium value of the packed bed catalytic reactor system as a result of the selective removal of hydrogen from the reaction system.     

Structural Changes of Scandia-Doped Zirconia Solid Solutions: Rietveld Analysis and Raman Scattering

Powder X-ray diffractometry (XRD) and Raman scattering measurements were used to study the structural changes of compositionally homogeneous metastable ZrO₂ solid solutions induced by ScO_1.5 doping. The crystal structures of monoclinic, tetragonal, cubic, and rhombohedral (Sc₂Zr₇O₁₇, ß-phase) solid-solution phases have been refined by using the Rietveld analysis of the XRD data at room temperature of arc-melted ZrO₂- X ScO_1.5 ( X = 0, 2, …, 20, and 22 mol%) samples. The results can be interpreted as indicating that the structures of the monoclinic and tetragonal phases approach those of the tetragonal and cubic phases, respectively, by ScO_1.5 doping. Raman scattering, as well as XRD, was useful to investigate the phase assemblage. Moreover, we could obtain Raman spectra of the ß-phase probably for the first time.     

Vitamin E reduces cholesterol esterification and uptake of acetylated low density lipoprotein in macrophages

The effects of vitamin E on cholesteryl ester (CE) metabolism in 1774 cells were examined. Pretreatment of 1774 cells with vitamin E at concentrations above 50 μM significantly decreased acetylated low density lipoprotein (LDL)-induced incorporation of [¹⁴C]oleate into CF in cells in a dose-dependent manner. This was partly due to vitamin E Also significantly inhibiting the uptake of [³H]CE-labeled acetylated LDL by 1774 cells. A trend existed toward suppression of acyl-CoA:cholesterol acyltransferase (ACAT) activity in the cell lysate at high vitamin E concentration, but there was no effect on hydrolysis of CE. These data indicate that vitamin E reduces the uptake of modified LDL and suppresses ACAT activity, resulting in less cholesterol esterification in macrophages; a novel mechanism underlying the antiatherogenic properties of vitamin E.     

Compact electrostatic levitator for diffraction measurements with a two axis diffractometer and a laboratory x-ray source

A compact electrostatic levitator was developed for the structural analysis of high-temperature liquids by x-ray diffraction methods. The size of the levitator was 200 mm in diameter and 200 mm in height and can be set up on a two axis diffractometer with a laboratory x-ray source, which is very convenient in performing structural measurements of high-temperature liquids. In particular, since the laboratory x-ray source allows a great amount of user time, preliminary or challenging experiments can be performed with trial and error, which prepares and complements synchrotron x-ray experiments. The present small apparatus also provides the advantage of portability and facility of setting. To demonstrate the capability of this electrostatic levitator, the static structure factors of alumina and silicon samples in their liquid phases were successfully measured.     

数控机床的防碰撞系统

当今世界的制造业正面临着高附加价值加工的转换,复合加工机、5轴联动机床、5面体加工中心等最新加工设备层出不穷。但是在加工车间,随着这些以复合加工机为代表的机械结构的复杂化,机械运动和机械操作也越来越复杂。在机加工操作中,刀具和工件以及夹具的干涉、机床单元的干涉比以前更加易于发生,需要操作工小心和熟练地操作。因此,迫切需求让机床操作工安全操作的机床。     

Friction-induced ultra-fine and nanocrystalline structures on metal surfaces in dry sliding

Sliding friction tests of pin-on-disc type were carried out for carbon steel, pure iron and pure copper, and the microstructure and hardness near the sliding surfaces were investigated in detail. It was found that patchy transfer layers with ultra-fine (<200 nm) structures were produced on the disc surfaces. Nanocrystalline grains of 30–50 nm were identified for carbon steel, and submicron sized grains of 100–150 nm were observed in pure copper. The thicknesses of the ultra-fine structures were in the range of 10–50 μm, depending on the specimen material, sliding speed and applied load. The hardness near the sliding surface of pure iron was increased compared with the matrix. It was suggested that the hardening was due to the very fine structure formed by severe plastic deformation, but not due to phase transformation caused by thermal effects.