Metastatic Voyage of Ovarian Cancer Cells in Ascites with the Assistance of Various Cellular Components

Epithelial ovarian cancer (EOC) is the most lethal gynecologic malignancy and has a unique metastatic route using ascites, known as the transcoelomic root. However, studies on ascites and contained cellular components have not yet been sufficiently clarified. In this review, we focus on the significance of accumulating ascites, contained EOC cells in the form of spheroids, and interaction with non-malignant host cells. To become resistant against anoikis, EOC cells form spheroids in ascites, where epithelial-to-mesenchymal transition stimulated by transforming growth factor-β can be a key pathway. As spheroids form, EOC cells are also gaining the ability to attach and invade the peritoneum to induce intraperitoneal metastasis, as well as resistance to conventional chemotherapy. Recently, accumulating evidence suggests that EOC spheroids in ascites are composed of not only cancer cells, but also non-malignant cells existing with higher abundance than EOC cells in ascites, including macrophages, mesothelial cells, and lymphocytes. Moreover, hetero-cellular spheroids are demonstrated to form more aggregated spheroids and have higher adhesion ability for the mesothelial layer. To improve the poor prognosis, we need to elucidate the mechanisms of spheroid formation and interactions with non-malignant cells in ascites that are a unique tumor microenvironment for EOC.     

Friction-induced ultra-fine and nanocrystalline structures on metal surfaces in dry sliding

Sliding friction tests of pin-on-disc type were carried out for carbon steel, pure iron and pure copper, and the microstructure and hardness near the sliding surfaces were investigated in detail. It was found that patchy transfer layers with ultra-fine (<200 nm) structures were produced on the disc surfaces. Nanocrystalline grains of 30–50 nm were identified for carbon steel, and submicron sized grains of 100–150 nm were observed in pure copper. The thicknesses of the ultra-fine structures were in the range of 10–50 μm, depending on the specimen material, sliding speed and applied load. The hardness near the sliding surface of pure iron was increased compared with the matrix. It was suggested that the hardening was due to the very fine structure formed by severe plastic deformation, but not due to phase transformation caused by thermal effects.     

An Approach to a Higher‐Power‐Density Power Supply for a 380‐V DC Distribution System

A methodology for realizing a higher‐power‐density DC‐DC converter has been proposed for a power unit installed in a 380‐V DC distribution system. The possibility of the converter design will be strengthened by using the series–parallel connection topology for isolated DC‐DC converters. A converter prototype with a power density of 10 W/cm³ has been fabricated, and the feasibility of the converter design has been confirmed experimentally. This result contributes to the realization of a highly efficient and highly space‐saving 380‐V DC distribution system. © 2013 Wiley Periodicals, Inc. Electr Eng Jpn, 186(3): 51–62, 2014; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.22494     

Wet dispersion mechanism of fine aggregates in multiphase flow with solid beads under simple shear

Clarifying the disintegration mechanism of aggregates in multiphase fluid flow coupled with beads and particulates is important for the optimum design of a wet dispersion process using a stirred media mill. Thus, we develop a numerical method for simulating multiphase flow with beads and particulates using a discrete element method and computational fluid dynamics, and we use the four‐way coupling simulation to study the fluid‐bead‐particulate‐coupled phenomenon that occurs in a simple shear box. The results show that the dominant force causing aggregate disintegration is the fluid force, rather than the bead contact force, because aggregates rarely collide with beads, contact force of which is too small to disintegrate aggregates. Furthermore, aggregates with strong aggregation force are effectively disintegrated by the fluid flow with a dominant high pure‐shear rate induced near the bead surfaces by the expansive force, rather than the compressive force. © 2014 American Institute of Chemical Engineers AIChE J 60: 4076–4085, 2014     

EFFECT OF STEPWISE CHANGE OF DRYING RATE ON MICROSTRUCTURE EVOLUTION IN POLYMER FILMS

The effect of the drying rate of the solvent on microstructure evolution in thin films of immiscible polystyrene/polycarbonate blends was investigated by applying a stepwise change in air velocity. The polymer blend was dissolved in tetrahydrofuran and cast on a glass substrate to form a thin liquid film. The drying rate of the solvent was measured by a gravimetric technique, and the phase-separated structure in the film was observed by optical microscopy. The results indicated that cellular structures of droplet arrays were formed in the phases evolved primarily during the early stage of drying, and the droplets then coalesced in the intermediate stage to form bigger droplets. The size of the first evolved phase decreased with increasing time at a high drying rate, whereas larger droplets were obtained with longer high drying rate regimes. These results suggested that the droplets were induced by secondary phase separation which was strongly affected by the drying rate of the solvent.     

Evaluation of the historical records of lead pollution in the annual growth rings and bark pockets of a 250-year-old Quercus crispula in Nikko,Japan

The annual growth rings and bark pockets of a 250-year-old Japanese oak (Quercus crispula), collected from the Nikko National Park, Japan in 2000 AD, were analysed by ICP mass spectrometry. The annual rings, sampled in 5-year increments, recorded Pb concentrations from 0.01 to 0.1 mg kg(-1) and there was no significant change in concentration with time. In contrast, bark pocket samples dating from 1875 to the present showed a progressive increase in Pb concentration with time, from approximately 0.1 to 10 mg kg(-1). Shoots of epiphytic moss growing on the tree trunk contained 17 mg kg(-1) Pb. The bark pockets recorded historical increases in airborne Pb pollution accompanying the industrialisation of Japan, which was initiated by the opening of Japan's borders from 1854. This increase was not reflected by the annual rings. The 206Pb/207Pb isotope ratio of the bark pockets decreased from approximately 1.18 to 1.16 from 1964 to the present, indicating changes in the sources of Pb pollution. The 206Pb/207Pb isotope ratio of the moss shoots was similar to the current bark (1.16). The data showed bark pockets to be more effective than annual rings for recording historical change in airborne lead pollution.     

Molecular mechanism of magnet formation in bacteria

Magnetic bacteria have an ability to synthesize intracellular ferromagnetic crystalline particles consisting of magnetite (Fe3O4) or greigite (Fe3S4) which occur within a specific size range (50-100 nm). Bacterial magnetic particles (BMPs) can be distinguished by the regular morphology and the presence of an thin organic membrane enveloping crystals from abiologically formed magnetite. The particle is the smallest magnetic crystal that has a regular morphology within the single domain size. Therefore, BMPs have an unfathomable amount of potential value for various technological applications not only scientific interests. However, the molecular and genetic mechanism of magnetite biomineralization is hardly understood although iron oxide formation occurs widely in many higher animals as well as microorganisms. In order to elucidate the molecular and genetic mechanisms of magnetite biomineralization, a magnetic bacterium Magnetospirillum sp. AMB-1, for which gene transfer and transposon mutagenesis techniques had been recently developed, has been used as a model organism. Several findings and information on the BMPs formation process have been obtained within this decade by means of studies with this model organism and its related one. Biomineralization mechanism and potential availability in biotechnology of bacterial magnets have been elucidated through molecular and genetic approach.     

Proof-testing and probabilistic lifetime estimation of glass fibers for sensor applications

The mechanical reliability of sensing glass fiber is one of the important problems in the practical use of fiber-optic sensors. To ensure long-term reliability on a mass-production level, a method of proof-testing is applied to a sensing glass fiber that will be subjected to mechanical deformation in its service situation. We propose to employ a higher strain level (screening level) in the proof-testing with a fiber-recoating technique that can suppress excessive damage during the testing. We consider a standard lifetime of 15 years of automotive applications and ensure a practical level of failure probability by a model calculation by using the strength data of a prototype fiber with the method of fracture-mechanics theory.     

Elimination of ioversol by hemodialysis

PURPOSE: The dialysability of ioversol was investigated in 12 patients with chronic renal failure, on 4-h hemodialysis. MATERIAL AND METHODS: One hundred ml of ioversol (320 mg I/ml) was injected in less than 10 min during CT. Hemodialysis was commenced within 30 min of starting the contrast medium injection and was continued for 4 h. Blood was sampled before and at 15 min, 30 min, 1 h, 2 h, and 4 h after the start of hemodialysis. Mean dialysance of ioversol was 114 to 129 ml/min and the elimination rate was 82.5 +/- 5.1% 4 h after starting hemodialysis. The half-life of ioversol during hemodialysis was 1.80 +/- 0.38 h. The only side effects of the ioversol injection were heat sensations, which were experienced by 3 patients. RESULTS: As ioversol was effectively removed from the body during the 4 h of hemodialysis and no severe adverse reactions were observed, we conclude that ioversol is suitable for use in hemodialyzed patients.