Evaluation of MPN method combined with PCR procedure for detection and enumeration of Vibrio parahaemolyticus in seafood

Vibrio parahaemolyticus densities in spiked and naturally contaminated seafood samples were enumerated by the MPN method combined with a PCR procedure (MPN-PCR method) targeting the species-specific thermolabile hemolysin gene (tlh), and by the MPN method using subcultivation of alkaline-peptone-water (APW) enrichment culture on thiosulfate-citrate-bile-sucrose (TCBS) agar (MPN-TCBS method). In the samples spiked with both V. parahaemolyticus and V. alginolyticus, the numbers of V. parahaemolyticus enumerated by the MPN-PCR method were similar to, or higher than the numbers of spiked cells, whereas those enumerated by the MPN-TCBS method were below the numbers of spiked cells. In naturally contaminated seafood samples, the numbers of V. parahaemolyticus enumerated by the MPN-PCR method were higher than those by the MPN-TCBS method. In the case of the MPN-TCBS method, isolation of V. parahaemolyticus from some APW cultures was difficult because of the overgrowth of many colonies other than V. parahaemolyticus (e.g., V. alginolyticus) on TCBS agar. In contrast, the PCR technique could detect tlh from APW culture without isolation of V. parahaemolyticus, so the possibility of failing to obtain a positive result in APW culture by the MPN-PCR method was considered to be lower than that by the MPN-TCBS method. Furthermore, utilization of the PCR technique reduces the time and labor required for the biochemical identification tests used in the MPN-TCBS method. For the detection and enumeration of V. parahaemolyticus in seafood, especially for samples that show many colonies other than V. parahaemolyticus on TCBS agar, the MPN-PCR method may be more convenient and reliable than the MPN-TCBS method.     

The protein encoded by cancer/testis gene D40/AF15q14 is localized in spermatocytes, acrosomes of spermatids and ejaculated spermatozoa

We have previously identified and cloned a human gene, D40, that is preferentially expressed in testis among normal organs, while it is widely expressed in various human tumor cell lines and primary tumors derived from different organs. In this report, we have examined the expression and localization of this protein in human testis with an antibody specific to D40 protein. In Western analyses, the anti-D40 antibody recognized a major band with a molecular mass of 300 kDa and a minor band of 250 kDa. These bands were not observed in the testis lysates from patients with Sertoli-cell-only syndrome and with Kleinfelter syndrome, who lack germ cells of the testis, indicating that D40 protein is expressed in the germ cells of normal testis. Immunohistochemical studies have revealed that D40 protein is highly expressed in spermatocytes and in the pre-acrosome of round spermatids. In the acrosome, D40 protein expression is observed not inside but outside the acrosome membrane. This is consistent with the finding that the amino-acid sequence at the amino terminal of the D40 protein lacks a hydrophobic signal peptide that is required for proteins to translocate to the membrane. Expression of D40 protein is observed in the acrosome of ejaculated spermatozoa as well, although the level is low compared with that in the pre-acrosome of spermatids. These results suggest that D40 protein plays important roles in spermatogenesis, especially in the formation and maintenance of the acrosome.     

Low‐Energy Electron Beam Induced Charging and Secondary Electron Emission Properties of FEP Film Used on Satellite Surfaces

Many kinds of insulating materials are used outside a spacecraft. They include FEP films, polyimide films, and so on, and are used as thermal control materials. These materials are exposed to a charged‐particle environment around the spacecraft. Thus then become charged due to charged particles, especially electrons. It has been pointed out that charging of these materials is likely to cause discharges on the surfaces. From this viewpoint, we investigated the charging potential characteristics of 127‐μm‐thick FEP film, a typical thermal control material, by exposing it to electron irradiation at various energies below 20 keV. In the dependence of the charging potential on the electron energy, we found that the electron energy at which no charge‐up occurs is about 2.7 keV. This appears to be the energy at the which secondary electron emission yield becomes unity. This indicates that electron irradiation of FEP film with energies lower than 2.7 keV induces positive charging. From the charge decay characteristics after electron irradiation, the volume resistivity of the film was also obtained as a function of the electric fields in the bulk of the FEP film.     

Characteristics of a-Si solar cells prepared by the super chamber at a high substrate temperature

A new approach to high-performance a-Si solar cells was studied. a-Si films prepared at a high substrate temperature (> 250°C) have a higher absorption coefficient and a low Si H₂ bond density. the effect of deposition temperature on the open-circuit voltage (V_oc) has been investigated systematically for glass/SnO2 Ipin/metal and glass/metal/nip/indium tin oxide (ITO) structure a-Si solar cells. The V_oc is found to depend strongly on the thermal history of the p/i interface. A short-circuit current of 19.5 mA/cm⁻⁻² was achieved for an a-Si solar cell using an a-Si i-layer with a thickness of 4000 Å, which was prepared at a substrate temperature of 270°C.     

Decomposition characteristics of biodegradable plastics made from sago starch‐extraction residue

Biodegradable plastics were synthesized for the effective use of sago starch‐extraction residue, which has been discarded as a waste. Two types of esterified sago starch‐extraction residue, P‐SP and L‐SP, were obtained. It had black color for P‐SP₁₆₀ (esterified by palm oil) to light yellow color for L‐SP₈₀ (esterified by lauric acid) and showed high carbon content, ranging from 399.3 to 537.1 g kg⁻¹. Biodegradable plastics from the residue, which had high esterification degree showed thermoplasticity and slower decomposition in Andisols in Japan and Inceptisols in Philippines. The esterification degrees of P‐SP₁₆₀ and L‐SP were 3.23 and 2.95 to 5.18 mmol g⁻¹, respectively. In addition, L‐SP₈₀ exhibited the most appropriate thermal softening behavior by heating. The cumulative decomposition of P‐SP₁₆₀ in Andisols and Inceptisols showed 16.7 and 32.8% of total carbon during 31 day of the incubation. On the other hand, the decomposition rates of L‐SP₈₀ in Andisols and Inceptisols were less than 10% of total carbon during 31 day of the incubation. The addition of triacetin as plasticizer to P‐SP₁₆₀ and L‐SP₈₀ remarkably influenced the decomposition rate of both molded P‐SP₁₆₀ and L‐SP₈₀. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Two-step migration of particles in evaporating bimodal suspension films at high Peclet numbers

During the drying of bimodal colloidal suspensions containing particles of various sizes, smaller particles preferentially migrate to the top surface under particular drying conditions, leading to undesirable drying defects in batteries and in other coating applications. Despite extensive previous studies, the migration mechanism is far from being understood because few in situ observations are available to support the hypotheses. To remedy this, we use real-time photoluminescence (PL) microscopy to investigate the migration of small fluorescent latex particles co-dispersing with large nonemissive latex particles. Comparing the measured PL intensity with that predicted by a model allows us to determine the quantity of small particles near the evaporating surface. The results reveal that the fluorescent particles segregate in two steps: The primary segregation occurs early in the evaporation stage, whereas the secondary stepwise migration occurs when the air–liquid interface invades the particle consolidation layer. The latter migration is attributed to the flow-induced motion of small particles that move through interstitial spaces between large particles.     

Multicomponent diffusion in phase-separating polymer blends with different frictional interactions: a mean-friction model

We present a compact formula for describing the mean frictional forces acting on a molecule in multicomponent systems. The friction-based diffusion theory of Zielinski and Hanley was extended to newly include the friction-average molar velocity as a reference frame. The results showed that the previous diffusion theories are unified by the friction-average concept by properly choosing the average velocity. The present model based on the diffusivity-related molar average velocity provides better predictions for the diffusive flux in a ternary miscible liquid compared to the other existing theories. The application of the model in phase-separating ternary systems revealed that the introduction of a highly diffusive third component into demixing polymer blends promotes a particular enhancement of the spinodal decomposition due to the difference in the frictional interactions between polymers.     

Needle penetrometry with variable force loading for measuring viscosity of pelletized coal upon heating

A needle penetrometry was performed loading steady force in a range from 1×10⁻³ to 2 N to pelletized coal upon heating via a cylindrical needle. From the observed effects of shear rate on apparent viscosity of softening coal pellet, defined as the shear-rate to shear-stress ratio, it was found that the pellet behaved as a Newtonian fluid for shear rates lower than a critical one while as a pseudo-plastic fluid for higher shear rates. The penetrometry was also carried out varying the force with time. The variable force loading enabled to maintain the shear rate well below the critical one, and thereby to measure the apparent viscosity of coal pellets as Newtonian fluids over a temperature range from 600 to 800 K. Upon heating at 10 K min⁻¹, the apparent viscosity of Goonyella coal pellet decreased from about 10¹⁰ Pa s at 640 K down to a minimum of about 10⁴ Pa s at 755 K, and increased up to 10⁹ Pa s at 800 K. In a course of heating as above, the viscosity of Blind Canyon coal pellet decreased above 600 K, underwent a minimum of about 10⁶ Pa s at 715 K, and increased up to 10¹⁰ Pa s at 770 K. Decreasing the heating rate from 10 to 3 K min⁻¹ caused the minimum viscosities of the pellets to increase by 1-2 orders of magnitude.     

Metastatic Voyage of Ovarian Cancer Cells in Ascites with the Assistance of Various Cellular Components

Epithelial ovarian cancer (EOC) is the most lethal gynecologic malignancy and has a unique metastatic route using ascites, known as the transcoelomic root. However, studies on ascites and contained cellular components have not yet been sufficiently clarified. In this review, we focus on the significance of accumulating ascites, contained EOC cells in the form of spheroids, and interaction with non-malignant host cells. To become resistant against anoikis, EOC cells form spheroids in ascites, where epithelial-to-mesenchymal transition stimulated by transforming growth factor-β can be a key pathway. As spheroids form, EOC cells are also gaining the ability to attach and invade the peritoneum to induce intraperitoneal metastasis, as well as resistance to conventional chemotherapy. Recently, accumulating evidence suggests that EOC spheroids in ascites are composed of not only cancer cells, but also non-malignant cells existing with higher abundance than EOC cells in ascites, including macrophages, mesothelial cells, and lymphocytes. Moreover, hetero-cellular spheroids are demonstrated to form more aggregated spheroids and have higher adhesion ability for the mesothelial layer. To improve the poor prognosis, we need to elucidate the mechanisms of spheroid formation and interactions with non-malignant cells in ascites that are a unique tumor microenvironment for EOC.