Chemical dehydrofluorination and electrical conductivity of poly(vinylidene fluoride) films

The dehydrofluorination of poly(vinylidene fluoride) (PVDF) powder and films was studied using several kinds of base solution. Especially the reactivity of 1,8-diazabicyclo[5.4.0]-7-undecene (DBU) in ethanol, KOH in 2-propanol and aqueous NaOH solution with tetrabutylammonium bromide was investigated by the change in infrared (IR) and ultraviolet-visible (UV-VI) absorptions of PVDF films. The elimination reactions by DBU or KOH were considered to be accompanied by substitution reaction. The electrical conductivity of dehydrofluorinated PVDF films increased markedly by doping with iodine, and the activation energies of conduction were found to be between 0.4 and 0.5 eV. When a drawn PVDF film was dehydrofluorinated and doped with iodine, anisotropy in conductivity was observed.     

Relationship between electron sensitivity and chemical structures of polymers as electron beam resists. VI: Electron sensitivity of various acetalized poly(vinyl alcohol)s

Acetalized poly(vinyl alcohol)s which were synthesized from poly(vinyl alcohol) (PVA) and aldehyde or ketone were evaluated as electron beam (EB) resists, in order to investigate the relationship between EB sensitivity and chemical structures of the polymers. It was found that the acetalized PVAs were easily crosslinked by EB exposure. The main mechanism of crosslinking may be radical reaction at acetal group. The sensitivity of the acetalized PVA depended on the structure of the acetal group. Acetalized PVAs synthesized from benzaldehyde, in which the electron attracting group was substituted on the benzene ring and from linear aliphatic aldehyde having a long alkyl chain, had high sensitivity. A high sensitivity of 7.2 × 10⁻⁷ C/cm² was attained when the acetalized PVA synthesized from p-chloro-benzaldehyde was used. Acetalized PVAs synthesized from PVA and aldehyde having a cyclic structure had an excellent dry etching durability and were suitable as negative EB resists.     

Synthesis of thermosensitive copolymer beads containing pyridinium groups and their antibacterial activity

Thermosensitive 4VP‐NIPAAm‐4G copolymer beads containing pyridyl groups were first prepared by suspension copolymerization of 4‐vinylpyridine (4VP), N‐isopropylacrylamide(NIPAAm), and tetraethylene glycol dimethacrylate (4G; crosslinking reagent) in a saturated Na₂SO₄ aqueous solution in the presence of surfactant and MgCO₃ as dispersants. Then the copolymer beads containing pyridinium groups were obtained by the quaternization of the copolymer beads with various alkyl iodides (CH₃I, C₄H₉I, C₈H₁₇I) in N,N‐dimethylformamide. The 4VP‐NIPAAm‐4G (15 : 97 : 3) copolymer bead and the 4VP‐NIPAAm‐4G copolymer beads quaternized with butyl iodide exhibited high thermosensitivity in water, although the 4VP‐NIPAAm‐4G copolymer beads quaternized with methyl iodide or octyl iodide hardly exhibited thermosensitivity. All the quaternized copolymer beads exhibited antibacterial activity against Escherichia coli (E. coli), although the 4VP‐NIPAAm‐4G copolymer bead did not. In particular, the copolymer bead quaternized with butyl iodide exhibited the highest antibacterial activity against E. coli at 30°C. It was also found that the antibacterial activity of the quaternized 4VP‐NIPAAm‐4G copolymer beads was greatly affected by not only chain length of alkyl groups in alkyl iodides, with which the 4VP‐NIPAAm‐4G copolymer beads were quaternized, but also by temperature of the solutions. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Photodegradation of tetrahalobisphenol-A (X = Cl, Br) flame retardants and delineation of factors affecting the process

The photoassisted degradation (HPLC-UV absorption), dehalogenation (HPLC-IC) and mineralization (TOC decay) of the flame retardants tetrabromobisphenol-A (TBBPA) and tetrachlorobisphenol-A (TCBPA) were examined in UV-irradiated alkaline aqueous TiO₂ dispersions (pH 12), and for comparison the parent bisphenol-A (BPA, an endocrine disruptor) in pH 4–12 aqueous media to assess which factor impact most on the photodegradative process. Complete degradation (2.7–2.8 × 10⁻² min⁻¹) and dehalogenation (1.8 × 10⁻² min⁻¹) of TBBPA and TCBPA occurred within 2 h of UV irradiation, whereas only 45–60% mineralization (2.3–2.7 × 10⁻³ min⁻¹) was complete within 5 h for the flame retardants at pH 12 and ca. 80% for the parent BPA. Factors examined in the pH range 4–12 that impact the degradation of BPA were the point of zero charge of TiO₂ particles (pH_pzc; electrophoretic method), particle or aggregate sizes of TiO₂ (light scattering), and the relative number of OH radicals (as DMPO–OH adducts; ESR spectroscopy) produced in the UV-irradiated dispersion. Dynamics of BPA degradation (2.0–2.4 × 10⁻² min⁻¹) were pH-independent and independent of particle/aggregate size, but did correlate with the number of OH radicals, at least at pHs 4 to 8–9, after which the rates decreased somewhat at pH > 9 with decreasing adsorption owing to Coulombic repulsive forces between the very negative TiO₂ surface and the anionic forms of BPA (pK_as ca. 9.6–11.3), even though the number of OH radicals continued to increase at the higher pHs.     

Drag reduction of aqueous suspensions of fine solid matter in pipe flows

It is well known that drag reduction properties of polymer solutions in pipe flows are classified into two categories, based on the relationship between the friction factor and the Reynolds number. The degree of drag reduction either increases with an increase in the Reynolds number or is independent of the Reynolds number. In the latter case, the drag reduction behavior is referred to as type B behavior. In this study, the pressure losses of aqueous suspensions of biofibers and graphene oxide flat particles in pipe flows were measured to clarify the effect of the shape of suspended fine solid matter on the friction factor. The experimental results demonstrated that the behavior of the friction factor corresponded with the type B behavior of drag reduction. The mean velocity profile in the range of the turbulent flow was also estimated from the friction factor data.     

A Novel LRRK2 Variant p.G2294R in the WD40 Domain Identified in Familial Parkinson’s Disease Affects LRRK2 Protein Levels

Leucine-rich repeat kinase 2 (LRRK2) is a major causative gene of late-onset familial Parkinson’s disease (PD). The suppression of kinase activity is believed to confer neuroprotection, as most pathogenic variants of LRRK2 associated with PD exhibit increased kinase activity. We herein report a novel LRRK2 variant—p.G2294R—located in the WD40 domain, detected through targeted gene-panel screening in a patient with familial PD. The proband showed late-onset Parkinsonism with dysautonomia and a good response to levodopa, without cognitive decline or psychosis. Cultured cell experiments revealed that p.G2294R is highly destabilized at the protein level. The LRRK2 p.G2294R protein expression was upregulated in the patient’s peripheral blood lymphocytes. However, macrophages differentiated from the same peripheral blood showed decreased LRRK2 protein levels. Moreover, our experiment indicated reduced phagocytic activity in the pathogenic yeasts and α-synuclein fibrils. This PD case presents an example wherein the decrease in LRRK2 activity did not act in a neuroprotective manner. Further investigations are needed in order to elucidate the relationship between LRRK2 expression in the central nervous system and the pathogenesis caused by altered LRRK2 activity.     

In situ measurement of lithium mass transfer during charging and discharging of a Ni–Sn alloy electrode

The charging (lithiation) and discharging (delithiation) of a Ni–Sn alloy electrode was examined by means of holographic interferometry and laser scanning confocal microscopy (LSCM). The developing concentration profile of Li⁺ ion during discharging (delithiation) of the Ni–Sn alloy electrode agreed reasonably well with the prediction based on transient diffusion theory, indicating that the cell configuration successfully suppressed natural convection due to the electrochemical reaction. The morphological variation of Ni–Sn alloy electrode during charge/discharge cycle could be observed very clearly by in situ LSCM. It was found that the contraction of active material during the discharge (delithiation) initiates cracks in the Ni–Sn alloy electrode.     

Molecular recognition by wall-assembling-type nanocavity in aqueous media

Steroid cyclophanes, each having a macrocyclic ring attached to four bile acid moieties via chiral lysine connectors, were synthesized, and the binding of the 2-naphthylphenylketone (guest) to the steroid cyclophanes in water was investigated. The circular dichroism spectra of the steroid cyclophane with cholic acid and L-lysine were significantly affected by the binding of the guest, and the induced circular dichroism based on the absorption of the achiral guest was also observed. The binding of the guest to the steroid cyclophane with cholic acids and D-lysines induced changes in the circular dichroism spectra with the opposite sign of the molecular ellipticities. An induced circular dichroism spectral change was not observed upon binding of the guest to the analogous host without OH sites. These results strongly suggest that the guest is conformationally fixed through hydrogen bonding between the carbonyl group of the guest and the steroidal hydroxyl group of the host. The assembly of only four steroid residues on the macrocyclic ring probably provided a hydrophobic nanocavity for hydrogen bonding.