Ultra micro glutamate sensor using platinized carbon-fiber electrode and integrated counter electrode

An integrated ultra micro glutamate sensor has been constructed with a 7 μm diameter platinized carbon-fiber disk (PCD) electrode and a platinum thin-film (PTF) counter electrode fabricated on the glass capillary tube. By platinization, the electrode activity of the carbon fiber is improved. In order to obtain a stable response, a pulse potential is applied for hydrogen peroxide measurement. The PTF counter electrode shows good stability and can be used as a substitute for a silver-silver chloride electrode. Since the integrated PCD electrode shows good characteristics as a hydrogen peroxide sensor, glutamate oxidase is immobilized onto the tip of the PCD electrode to construct the ultra micro glutamate sensor. The sensor shows stable response to glutamate and a response time within 12 s. The calibration range for glutamate measurement is 50–800 μM.     

Thermal and mechanical properties of bio-based polymer networks by thiol-ene photopolymerizations of gallic acid and pyrogallol derivatives

Allylated pyrogallol (A3PG) and acrylated pyrogallol (Ac3PG) as bio-based trienes, and allylated gallic acid (A4GA) and acrylated allyl gallate (Ac3A1GA) as bio-based tetraenes were synthesized from pyrogallol and gallic acid, respectively. Thiol-ene photopolymerizations of the bio-based polyenes and a pentaerythritol-based primary tetrathiol (pS4P) at the allyl/SH ratio of 1/1 produced photo-cured resins (A3PG-pS4P, Ac3PG-pS4P, A4GA-pS4P and Ac3A1GA-pS4P). The FT-IR spectral analysis revealed that thiol-ene reactions of thiol/allyl and thiol/acryloyl groups smoothly proceeded. Gel fractions of acryl-based cured resins were a little higher than those of allyl-based cured resins. The swelling test and dynamic mechanical analysis revealed that GA- and acryl-based cured resins exhibited higher crosslinking densities than PG- and allyl-based cured resins, respectively. A higher order of tan δ peak temperature was Ac3PG-pS4P (48.3 ° C) > Ac3A1GA-pS4P (24.1 ° C) > A4GA-pS4P (22.1 ° C) > A3PG-pS4P (?7.8 ° C). Ac3PG-pS4P displayed the highest 5 % weight loss temperature, tensile strength and tensile modulus among all of the cured resins.     

Effects of supplied gas humidity change on PEFC transient power generation

Polymer electrolyte fuel cells (PEFCs, PEMFCs) are gaining increasingly more attention as clean and efficient energy‐conversion devices. Vapor and liquid transport has a strong impact on the power generation characteristics and efficiency of PEFCs, and so proper water management is needed for efficiency and durability. However, water transport factors are not well understood, particularly during unsteady operation—often the case in vehicles and distributed stationary power generators. In this study, to understand and generalize the effects of local water transport on PEFC performance, transient mass transport characteristics inside a PEFC were investigated experimentally and numerically. For this purpose, we developed an unsteady two‐dimensional numerical model based on mass‐ and charge‐conservation equations in the channel, gas diffusion layer (GDL), and membrane electrode assembly (MEA). As necessary parameters for model development, we measured the water content of the MEA, the membrane resistivity, the activation overvoltage, overall mass transfer coefficient, and so on. The membrane resistivity greatly increases as the relative humidity decreases. The activation overvoltage is also affected by the relative humidity, and not only by the current density and oxygen activity. Current load and voltage changes are frequently used as PEFC transient inputs, but lead to very complicated and intractable phenomena such as changes in the amount of generated water and electro‐osmosis, state of the electrical double layer, and so on. Hence, stepwise changes in the relative humidity of the supplied gas were adopted in this study. The experimental and numerical transient responses were in good agreement under most operating conditions, and the reliability of our measurement methods for the water transport properties and our numerical model were confirmed. Here we discuss the dominant factor in the transient responses, and conclude that the transport resistance at the PEM–GDL interface is the largest and most dominant factor in a relatively dry state under unsteady operating conditions. © 2011 Wiley Periodicals, Inc. Heat Trans Asian Res; Published online in Wiley Online Library ( wileyonlinelibrary.com/journal/htj ). DOI 10.1002/htj.20371     

Improving the shelf life stability of vacuum-packed fresh-cut peaches (Prunus persica L.) by radio frequency heating in water

The present study aimed to investigate the influence of radio frequency (RF) heating at 70 and 80 °C, in comparison with the traditional conventional heating. The RF heating technology was applied for maintaining the colour and textural quality as well as inactivating the enzymatic activity of polyphenol oxidase (PPO) and reducing the Escherichia coli growth in packaged fresh-cut peach samples. To evaluate this, 120 g of freshly cut peach fruit was placed in heat-resistant plastic bags, and 50 mL of sugar solution (12°Brix) was added to each bag and vacuum-packed for conventional heating and radio frequency (RF) heating. Our results demonstrated that the RF heating process could reduce the heating time by up to 83% at 70 and 80 °C as compared to conventional heating. Moreover, RF heating at 70 and 80 °C reduced the PPO enzymatic activity, which caused enzymatic browning, up to 85.46% and 93.5%, respectively, as compared to 40.86% reduction only for conventional heating. Furthermore, RF heating completely inhibited E. coli growth. Collectively, we demonstrated that RF heating is an emerging and promising technology for improving the quality of fresh-cut fruits such as peach during various storage conditions. The present study provides relatively novel information on the effectiveness of RF heating in maintaining the quality of fresh-cut peaches. In the future, we would like to investigate the effectiveness of RF heating on other agricultural products.     

Neuronal synchronization and ionic mechanisms for propagation of excitation in the functional network of immortalized GT1-7 neurons: optical imaging with a voltage-sensitive dye

Immortalized gonadotropin releasing hormone (GnRH) neurons (GT1 cell line) in culture release GnRH in a pulsatile manner, suggesting that GT1 cells form a functional neuronal network. Optical imaging techniques and a voltage-sensitive fluorescent dye (RH795) were used to study the mechanism of neuronal synchronization and intercellular communication in cultured GT1-7 cells (one of the subclones of the GT1 cell line). The majority (79%) of GT1-7 cells in contact with one another revealed synchronized fluctuations in spontaneous neuronal activity. When a cell in contact with other cells was electrically stimulated, the evoked excitation was propagated to neighbouring cells. The ionic mechanisms involved in the propagation of electrical signals between interconnected GT1-7 cells were investigated using various blockers of Na+, Ca2+ and K+ channels. The propagation of stimulus-evoked excitation was prevented by the voltage-dependent Na+ channel blocker tetrodotoxin. It was also prevented by the voltage-dependent Ca2+ channel blockers, Ni+ (nonselective), nimodipine (L-type) and flunarizine (T-type > L-type), but not apparently affected by omega-agatoxin IVA (P- and Q-type) and omega-conotoxin MVIIA (N-type). The propagation was not influenced by the K+ channel blockers, quinine, tetraethylammonium and Ba2+, but in some cases, it was enhanced by 4-aminopyridine (4-AP) and prevented by apamin. These results suggest that voltage-dependent Na+ channels and L- and T-type Ca2+ channels are involved in the propagation of electrical signals in the GT1-7 neuronal network. Ionic mechanisms, through 4-AP- or apamin-sensitive K+ channels, also seem to be involved in the regulation of signal propagation. These mechanisms may underlie the functioning of the neuronal network formed by immortalized GnRH neurons.     

Improvement of dielectric strength on transformer winding using new aramid paper

Large power transformers using perfluorocarbon liquid have advantages of high dielectric strength, excellent cooling ability, and nonflammability. To make the transformer more compact, it is very important to improve the insulation material. Recently, the authors succeeded in developing a new type of aramid insulation paper which has no fluff on its surface to avoid field concentration. In this study, an outline of the developed paper and the experimental results of the insulation strength on turn-to-turn and intercoil models are described. It was found that the new aramid paper increases the insulation strength 1.2 (turn-to-case) to 1.7 (intercoil case) times that of the existing insulating paper.