Manipulating the chemical affinity and kinetics of 3D silica particle network via the phase-separation technique

We developed a simple and versatile technique for a particle’s self-organizing-network based on a non-solvent induced micro-phase separation (NIPS). When a good solvent vaporizes from a particle dispersion in a ternary solution including the polymer, good solvent and non-solvent, the suspension is separated into the polymer network and non-solvent phase. If the affinity between the particles and polymer is sufficient enough, the particles are entrapped in the polymer network and particle network can be achieved. To expand this technique to particles with various physical properties, the surface of the particles was identified using the Hansen dispersibility parameter (HDP). From a comparison of the HDP of the unmodified and modified silica, an NH₂ group is suitable for entrapment of the silica by cellulose acetate as the polymer. However, with an increase in number of the silica particles, entrapment of the silica in the polymer was prevented. Control of the phase separation rate by the lowering temperature leaded to entrapment of silica particles in the polymer network. The proposed technique is effective not only for spherical oxide particles, but also for non-oxides, various shapes and structures. Depending on particle characteristics, functional films and bulk materials for thermal insulation, light diffusion, and electro conductivity can be obtained.     

Morphological control of ZnO particles synthesized via a new and facile aqueous solution route

Zinc oxide with a diversity of well-defined morphologies was synthesized via a simple aqueous solution route by decomposing Zn_xO_y(OH)_z precursor at suitable reaction conditions. Flower-like ZnO composed of rods was obtained by treating Zn_xO_y(OH)_z precursor in the reaction solution at 90 °C for 6 h. The precipitate of layer-like Zn_xO_y(OH)_z precursor was decomposed by drying at 90 °C for 24 h in air, resulting in the formation of ZnO microtubes.     

Effects of Fruiting Bodies of Basidiomycetes on Yeast Growth Rates

The effects of edible fruiting of Basidiomycetes on growth of Saccharomyces cerevisiae and other yeast strains were examined. The growth rates were significantly increased in the presence of fruiting bodies but there was no significant difference growth yield between cultures with and without fruiting bodies. Growth rates of yeast cells were promoted in both synthetic and natural media.     

Full‐duplex analogue/digital data transmission using lasers coupled to GI fibre and its application

This paper describes a low‐cost version of a full‐duplex optical fibre analogue/digital data transmission link whose practical implementation is simplified by using a pair of laser diodes, each having a built‐in photodiode for monitoring the laser output power, and its application to vibration test data transmission. The transmission link sends digital data of up to 9600 bps in one direction, and analogue data of DC to 100 kHz and image data specified by an NTSC colour video signal in the opposite direction, all at the same time through one GI optical fibre. Being simple in configuration and stable against noise, this type of link has a variety of applications within factory, home and offices. Copyright © 2001 John Wiley & Sons, Ltd.     

Fine structures of residual strain distribution in Fe-Doped lnP-100) wafers grown by the LEC and VCZ methods

By using a high-spatial-resolution scanning infrared polariscope, in-plane components of residual strain have been characterized quantitatively in 2′Φ wafers of Fe-doped InP( 100) single crystals grown by the liquid-encapsulated Czochralski (LEC) and the vapor pressure controlled Czochralski (VCZ) methods. The twodimensional distribution maps of LEC-grown wafers reveal characteristic fine structures such as slip-like patterns originated from crystallographic glides during the crystal growth process, highly strained spots and filaments due to inclusions or voids inside the wafer, or due to scratches on the surface. The sliplike patterns are seldom observed in the VCZ-grown wafers. The residual strain value averaged over the whole region of wafer is also examined, together with etch pit density and resistivity, as a function of the solidified fraction. It is found that the residual strain in the Fe-doped InP crystals grown by the LEC and VCZ methods mainly depends on the thermal stress during the growth process rather than on the impurity-hardening effect of Fe.Key words: InP, infrared polariscope, liquid-encapsulated Czochralski (LEC) method, residual strain, vapor pressure controlled Czochralski (VCZ) method     

Polymorphism in the promoter region of the alpha 2A adrenergic receptor gene and mood disorders

Alpha 2 adrenergic receptors are thought to play a crucial role in the etiology or treatment of mood disorders. Polymorphism(s) in the promoter region of the alpha 2 receptor may affect the gene expression and be associated with mood disorders. We studied the previously reported polymorphisms of the alpha 2A receptor gene at position-1291 in 114 healthy controls and 103 mood disorder patients. There was statistically no difference between controls and patients in either the genotype or the allele frequency. There was statistically no difference between the genotype and the clinical characteristics. Our results suggest there is no association between this polymorphism in the promoter region of the alpha 2A receptor gene and mood disorders.     

Fabrication of semi-conductive ceramics by combination of gelcasting and reduction sintering

In this study, we propose a new process to fabricate electrically semi-conductive alumina by the combination of gelcasting and reduction sintering. The process is similar to the conventional gelcasting method except for varying amounts of methacrylamide monomer dosages at 2.83, 5.50, and 8.04 wt% relative to the mass of the slurry. Correspondingly, the rheological evaluation of aqueous slurry was conducted. The resulting fluidity exhibited that monomer dosage until 8.04 wt% yielded slurry viscosity of 1628 MPA·s at shear rate of 20 s⁻¹, which was feasible for gelcasting without noticeable casting defects. The freshly gelled bodies were demolded, carefully dried, and then sintered at different schedules in nitrogen atmosphere. The reduction-sintered samples were re-sintered in air for comparative evaluation of physical property. The sintered alumina body was characterized by electrical resistance, X-ray diffraction, and scanning electron microscopy. The results showed that monomer additions and sintering schedule significantly affect in lowering electrical resistivity. The obtained lowest value was 3.6 × 10⁶ Ω-cm with 8.04 wt% monomer dosage and sintering at 1550°C with 2 h holding time. The resulting material is classified as semi-conductive, which is potential for electrostatic shielding applications. The effect of physical property and microstructure on electrical conductivity and the corresponding reaction mechanism were discussed in details.     

Mmic technology for communication systems

MMIC technology is recently progressing at a rapid rate and is now being applied in communications systems. However, there remain few practical applications. This is mainly due to the high cost of conventional mmics because of the small market size and specialized needs. This paper introduces three new technical approaches that overcome the problems: uniplanar mmic, line unified fet^lufet), and multilayer mmic. Concepts and several examples of these technologies are described. It is shown that these technologies are effective not only for cost reduction but also for increased performance. In addition, one example of system application is described.     

Boron-doped hydrogenated amorphous carbon films grown by surface-wave mode microwave plasma chemical vapor deposition

We report the effects of boron (B) doping on optical and structural properties of the hydrogenated amorphous carbon thin films grown by surface-wave mode microwave plasma (SW-MWP) chemical vapor deposition (CVD) on n-type silicon and quartz substrates at room temperature. Argon and acetylene were used as a carrier and carbon source gases respectively. Analytical methods such as X-ray photoelectron spectroscopy (XPS), Nanopics 2100/NPX200 surface profiler, JASCO V-570 UV/VIS/NIR spectroscopy, Fourier transform infrared spectroscopy (FT-IR) and Raman spectroscopy were employed to investigate the properties of the films. Low atomic concentration of B (0.08 at.%) was found in the doped film. The optical band gap of the undoped film was 2.6 eV and it decreased to 1.9 eV for the B-doped film. Structural property shows the crystalline structure of the film and it has changed after incorporating B as a dopant. The structural modifications of the films leading to being more graphite in nature were confirmed by the Raman and FT-IR characterization.     

Identifying rotation and oscillation in surface tension measurement using an oscillating droplet method

We proposed a new approach to identify the frequencies of droplet rotation and m=±2 oscillation that degrade the accuracy of surface tension measurement by an oscillating droplet method. Frequencies of droplet rotation and m=±2 oscillation can be identified by a phase unwrapping analysis of time dependence of the deflection angle for the maximum diameter of the droplet image observed from above. The present method was validated, using test data with given frequencies. © 2008 Wiley Periodicals, Inc. Heat Trans Asian Res, 37(7): 421–430, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.20214