Electrochemical properties of iron rust

In order to elucidate the electrochemical properties of iron rust, galvanostatic cathodic polarization of rusted steel and rust electrodes, prepared by fixing a piece of rust plate on an acrylic plate with conductive adhesive, was examined. The change in the amount of crystalline substances in the rust layer was observed by X-ray diffraction. The electrochemically active intermediate substances, could not be identified by X-ray diffraction, but their behaviour was distinguished from that of crystalline substances. The rest potential of the rust electrode was controlled by the equilibrium potential of intermediate substances. “An overlapping dual electrode” model is proposed for rusted steel in aqueous solution. Beneficial elements added to weathering steel inhibit the formation of crystalline magnetite in the cathodic reduction process of rust and increase the electrical resistance of the rust layer.     

Influence of chromium on the local structure and morphology of ferric oxyhydroxides

The extended X-ray absorption fine structure (EXAFS) method and transmission electron microscopy (TEM) have been used for characterizing the local structure and morphology of ferric oxyhydroxides, α-FeOOH and γ-FeOOH, with and without chromium. These ferric oxyhydroxide powders were prepared from aqueous solutions containing iron and chromium ions. Radial structural functions for iron obtained by Fe K edge EXAFS spectra showed that the linkage of structural units formed by FeO₆ octahedra in γ-FeOOH is distorted by chromium addition, while such distortion in α-FeOOH is not clearly detected. On the other hand, Cr K edge EXAFS spectra showed that the local structure around chromium does not necessarily correspond to the local structure around of iron, which is observed by Fe K edge EXAFS spectra. This suggests that the structural units containing iron and chromium are heterogeneously distributed in these ferric oxyhydroxides. The local structural information was discussed coupled with morphological features of these ferric oxyhydroxides observed by TEM.     

Difference between mechanical alloying and mechanical disordering in the amorphization reaction of Al50Ta50 in a rod mill

Amorphous Al₅₀Ta₆₀ alloy powders have been synthesized by mechanical alloying (MA) from elemental powders of aluminium and tantalum, and mechanical disordering (MD) from crystalline intermetallic compound powders of AlTa respectively using the rod milling technique. The mechanically alloyed and the mechanically disordered alloy powders were characterized by X-ray diffraction, scanning electron microscopy, electron probe microanalysis, transmission electron microscopy, differential thermal analysis, differential scanning calorimetry and chemical analysis. The results have shown that the crystal-to amorphous transformation in the MD process occurs through one stage, while the crystallineto-amorphous formation in the MA process occurs through three stages. At the early and intermediate stages of the MA time, heating the alloy powders to 700 K leads to the formation of an amorphous phase by a solid-state amorphizing reaction. At the final stage of the MA time, the amorphous phase is crystallized through a single sharp exothermic peak. Contrary to this, amorphous alloy powders produced by MD are crystallized through two broad exothermic peaks.     

Dynamic recrystallization by rapid heating followed by compression for a 17Ni–0.2C martensite steel

A 17Ni–0.2C martensite steel was rapidly heated below the austenite formation temperature and deformed in compression. Continuous dynamic recrystallization was observed. The behavior is similar to that in a ferrite–pearlite steel but the onset strain is much smaller. Sub-micron ferrite grains were obtained through the dynamic recrystallization.     

Embedded blended learning within an Algebra classroom: a multimedia capture experiment

This two‐group, pretest‐posttest, quasi‐experimental study compared secondary students' learning of Algebra II materials over a 4‐week period when identical instruction by the same teacher was delivered through either embedded blended learning (treatment group; n = 32) or a live‐lecture classroom (control group; n = 24). For both groups, instruction was delivered in a normal classroom setting. A math test and a student survey were used to measure students' learning of Algebra II and satisfaction with the instruction. Students in the treatment group showed significantly greater gains in Algebra II test scores and evaluated their learning experiences significantly more positively than did the control group. The great majority (80%) of students in the treatment group preferred the embedded blended learning over traditional live lectures for future learning of math. Students' responses to open‐ended survey questions suggested that students in the treatment group appreciated the: (a) ability to control the pace of instruction; (b) new role of the classroom teacher; (c) lack of distraction in the blended learning environment; and (d) accessibility of the embedded multimedia lessons outside the classroom. This study suggests that screen‐capture instructional technology can be used towards establishing a teacher‐based, embedded blended learning environment within a secondary algebraic classroom.     

A wide view auto‐stereoscopic 3D display with an eye‐tracking system for enhanced horizontal viewing position and viewing distance

This paper describes the development of auto‐stereoscopic three‐dimensional (3D) display with an eye‐tracking system for not only the X‐axis (right–left) and Y‐axis (up–down) plane directions but also the Z‐axis (forward–backward) direction. In the past, the eye‐tracking 3D system for the XY‐axes plane directions that we had developed had a narrow 3D viewing space in the Z‐axis direction because of occurrence of 3D crosstalk variation on screen. The 3D crosstalk variation on screen was occurred when the viewer's eye position moved back and forth along the Z‐axis direction. The reason was that the liquid crystal (LC) barrier pitch was fixed and the LC barrier was able to control the only barrier aperture position. To solve this problem, we developed the LC barrier that is able to control the barrier pitch as well as the barrier aperture position in real time, corresponding to the viewer's eye position. As a result, the 3D viewing space has achieved to expand up to 320–1016 mm from the display surface in the Z‐axis direction and within a range of ±267 mm in the X‐axis direction. In terms of the Y‐axis direction, the viewing space is not necessary to be considered, because of a stripe‐shaped parallax barrier.     

Repeatedly foldable AMOLED display

In this study, a 5.9‐inch foldable active‐matrix organic light emitting diode (AMOLED) display was developed. A folding test was performed repeatedly. The display survived the folding test (100,000 folds) with a curvature radius of 2 mm. To protect an organic light emitting diode (OLED) against moisture, inorganic passivation layers are provided on the upper and lower sides of the flexible display. Using our transfer technology, high density passivation layers can be obtained. The measured water vapor transmission rate of the layer is 7 × 10^?6 g/m²?day or less, which improves OLED reliability. With these techniques, we have developed a book‐type display, which is repeatedly foldable like a book, and a tri‐fold display including a display area, which is foldable in three.     

Emerging From the Cocoon? Revisiting the Tele‐Cocooning Hypothesis in the Smartphone Era

The tele‐cocooning hypothesis posits that mobile communication increases interaction with communication rich ties, while simultaneously weakening interaction with communication weak ties. In this study, we demonstrate how smartphones can be used to mitigate tele‐cocooning behavior by stimulating interaction with communication weak ties. Using a smartphone application to collect non‐identifying mobile communication log data, we conducted a field experiment with 193 Japanese participants. The treatment consisted of onscreen reminders designed to stimulate interaction with communication weak ties. The results indicate that the treatment promoted the activation of communication weak ties and the acquisition of information through those ties, suggesting that smartphones can be utilized to promote access to social capital.     

HD/SHD still image database system and image distribution in broadband network applications

This paper focuses on a practical design for an efficient scalable image database and retrieval system over broadband networks. It describes a concrete solution for the implementation of HD/SHD (high-definition/super-high-definition) still image retrieval services which can be used in different applications. The structure of the complete system, consisting of a directory server, an image server, and MMI (man-machine interface) devices, has been presented, detailing each element and their corresponding functions. The desired HD/SHD image is displayed on the HD-PDP (plasma display panel) with the aid of image matching. The proposed system generates image index automatically, eliminating special skills in preparing index images and crucially reducing the processing time (from 35 min to 110 s), and does not use keywords. It has been also shown that these indices can be used for quite accurate image retrieval, i.e., the system provides high precision rates (currently up to 98%) to the user, eliminating troubles encountered in the image retrieval operations due to limitation on the user’s age, culture, knowledge, and languages.The broadband IP networks currently have a number of issues from the viewpoint of practical system operations, and so the requirements and issues needed for the networks are discussed from the viewpoint of in-service performance, differentiation among different types of services, secure connections, and so on, focusing on handling of HD/SHD still images.     

Lithography with UV-LED array for curved surface structure

The technology to fabricate high-aspect ratio and micro curved surface structures is needed for optical device fabrication such as micro lens, light guiding device, and so on. In this study, micro curved surface structures were fabricated by using novel lithography technique with UV-LED array and rotary stage (Hanai et al. in Proceedings of the 22nd sensor symposium, pp 516–519, 2005). Smooth surface structures can be fabricated in this technique, because UV-LED which has wide directivity characteristics makes the difference of the UV dose. In addition, the structures can be formed with high uniformity in large area by only one exposure process, because rotation reduces the unevenness of exposure. This technique can control the shapes of structures by changing exposure time and applying gray scale mask method (Waits et al. in Sensors Actuat A 119:245–253, 2005). We fabricated structures of hemisphere, semi-cylinder, and semi-cone by using this technique. High-aspect ratio structures were obtained and they had smooth curved surface. Then, they were used for micro lens fabrication. By using molding technique, micro lenses of the UV curable resin were fabricated on the silicon wafer.