Studies on fish scale collagen of Pacific saury (Cololabis saira)

We purified and characterized Type I collagen from the scales of the Pacific saury (Cololabis saira) and compared it with collagen from other organisms. Subunit composition of C. saira collagen (2α1 + α2) was similar to that of red sea bream (Pagrus major) and porcine collagen. C. saira collagen did not form a firm gel after neutralization of pH in solution. The temperature of denaturation (24–25 °C) of C. saira collagen was slightly lower than that of P. major collagen (26–27 °C). The contents of proline and hydroxyproline were lower in red sea bream and Pacific saury collagen than in porcine collagen. Circular dichroism spectra and Fourier-transformed infrared spectra showed that heat denaturation caused unfolding of the triple helices in all three collagens.     

A Computational Drug Metabolite Detection Using the Stable Isotopic Mass-Shift Filtering with High Resolution Mass Spectrometry in Pioglitazone and Flurbiprofen

The identification of metabolites in drug discovery is important. At present, radioisotopes and mass spectrometry are both widely used. However, rapid and comprehensive identification is still laborious and difficult. In this study, we developed new analytical software and employed a stable isotope as a tool to identify drug metabolites using mass spectrometry. A deuterium-labeled compound and non-labeled compound were both metabolized in human liver microsomes and analyzed by liquid chromatography/time-of-flight mass spectrometry (LC-TOF-MS). We computationally aligned two different MS data sets and filtered ions having a specific mass-shift equal to masses of labeled isotopes between those data using our own software. For pioglitazone and flurbiprofen, eight and four metabolites, respectively, were identified with calculations of mass and formulas and chemical structural fragmentation analysis. With high resolution MS, the approach became more accurate. The approach detected two unexpected metabolites in pioglitazone, i.e., the hydroxypropanamide form and the aldehyde hydrolysis form, which other approaches such as metabolite-biotransformation list matching and mass defect filtering could not detect. We demonstrated that the approach using computational alignment and stable isotopic mass-shift filtering has the ability to identify drug metabolites and is useful in drug discovery.     

Focused ion beam processing to fabricate ohmic contact electrodes on a bismuth nanowire for Hall measurements

Ohmic contact electrodes for four-wire resistance and Hall measurements were fabricated on an individual single-crystal bismuth nanowire encapsulated in a cylindrical quartz template. Focused ion beam processing was utilized to expose the side surfaces of the bismuth nanowire in the template, and carbon and tungsten electrodes were deposited on the bismuth nanowire in situ to achieve electrical contacts. The temperature dependence of the four-wire resistance was successfully measured for the bismuth nanowire, and a difference between the resistivities of the two-wire and four-wire methods was observed. It was concluded that the two-wire method was unsuitable for estimation of the resistivity due to the influence of contact resistance, even if the magnitude of the bismuth nanowire resistance was greater than the kilo-ohm order. Furthermore, Hall measurement of a 4-μm-diameter bismuth microwire was also performed as a trial, and the evaluated temperature dependence of the carrier mobility was in agreement with that for bulk bismuth, which indicates that the carrier mobility was successfully measured using this technique.

PACS

81.07.Gf     

Exploratory research on creep and fatigue properties of 9Cr-steels for the steam generator of an FBR

Research on the applicability of 9Cr-steels to the steam generator of the demonstration fast breeder reactor was performed by the Subcommittee of the Japan Welding Engineering Society as a four-year program from 1985. In this program, exploratory tests, which included tensile, creep rupture and low-cycle fatigue tests, were conducted on three kinds of 9Cr-steels (Mod.9Cr-1Mo, 9Cr-1Mo-V-Nb, and 9Cr-2Mo) and their weldments. This paper describes the summary of results obtained in this program. Among the tested 9Cr-steels, Mod.9Cr-1Mo steel shows the best creep rupture strength and its weldment indicates almost the same level of creep rupture strength and the base metal at 500 and 550°C. The low-cycle fatigue properties of Mod.9Cr-1Mo steel is also discussed from its relation to the tensile properties.     

Analysis of measured isotopic compositions of high-burnup PWR MOX and UO2 fuels in the MALIBU program

The measured isotopic compositions of fuel samples taken from high-burnup spent PWR MOX and UO₂ assemblies in the MALIBU program has been analyzed by lattice physics codes. The measured isotopes were U, Np, Pu, Am, and Cm isotopes and about 30 major fission product nuclides. The codes used in the present study were a continuous-energy Monte Carlo burnup calculation code (MVP-BURN) and a deterministic burnup calculation code (SRAC) based on the collision probability method. A two-dimensional multi-assembly geometrical model (2 × 2 model) was mainly adopted in the analysis in order to include the fuel assemblies adjoining the relevant fuel assembly, from which the samples were taken. For the MOX sample, the 2 × 2 model significantly reduces the deviations of the calculated results from the measurements compared with a single assembly model. The calculation results of MVP-BURN in the 2 × 2 model reproduce the measurements of U, Np, and Pu isotopes within 5% for the MOX sample of 67 GWd/t. The deviations of their calculated results of U, Np, and Pu isotopes from the measurements are less than 7% for the UO₂ sample of 72 GWd/t.     

Acetate and ethanol production from H2 and CO2 by Moorella sp. using a repeated batch culture

The growth inhibition of Moorella sp. HUC22-1 by undissociated acetic acid was analyzed using a non-competitive inhibition model coupled with a pH inhibition model. In the cells grown on H2 and CO2, the inhibition constant, K(p) of the undissociated acetic acid was 6.2 mM (164 mM as the total acetate at pH 6.2, pKa = 4.795, 55 degrees C), which was 1.5-fold higher than that obtained in cells grown on fructose. When a pH-controlled batch culture was performed using a fermentor at pH 6.2 with H2 and CO2, a maximum of 0.92 g/l of dry cell weight and 339 mM of acetate were produced after 220 h, which were 4.4- and 6.8-fold higher than those produced in the pH-uncontrolled batch culture, respectively. In order to reduce acetate inhibition in the culture medium, a repeated batch culture with cell recycling was performed at a constant pH with H2 and CO2. At a pH of 6.2, the total acetate production reached 840 mmol/l-reactor with 4.7 mmol/l-reactor of total ethanol production after 420 h. When the culture pH was maintained at 5.8, which was the optimum for ethanol production, the total ethanol production reached 15.4 mmol/l-reactor after 430 h, although the total acetate production was decreased to 675 mmol/l-reactor.     

Organic electrolyte solutions for rechargeable lithium batteries

Several combinations of organic solvents and lithium salts have been examined as electrolytes for ambient-temperature, rechargeable lithium batteries. Ethers (1,2-dimethoxyethane, tetrahydrofuran, 1,3-dioxolane, etc.) have been used as the base solvents, as they are electrochemically stable and have a low reactivity towards lithium metal. In the main, mixed-solvent systems have been adopted to improve the solubility of electrolytes and, hence, the electrolytic conductivity of the solution. The charge/discharge characteristics of the lithium negative electrode have been examined in these electrolytes. The cycling characteristics of Li/TiS₂ cells with the electrolytes containing crown ethers have also been investigated. The electrochemical properties of the electrodes and the charge/discharge characteristics of these cells are markedly influenced by the composition of the electrolyte.

The electrode reaction mechanisms are briefly discussed for these systems.     

Porous TiO2 thin films synthesized by a spray pyrolysis deposition (SPD) technique and their application to dye-sensitized solar cells

Titanium dioxide (TiO₂) thin films were synthesized on glass substrates from titanium(IV)oxy acetylacetonate 2-butanol solution by a spray pyrolysis deposition (SPD) technique. The films consisted of TiO₂ leaflets and showed the oriented growth along the (2 0 0) direction. The surface area of the film was successfully increased by adding a small amount of aluminum(III) acetylacetonate (AA) in the source solution. This is because AA sublimates easily during the film formation to leave many pores within the film. A dye-sensitized solar cell was constructed with the TiO₂ film which was deposited on the fluorine-doped tin(IV) oxide layer by the SPD technique. The conversion efficiency of the cell was effectively enhanced as high as 3.2% at AA content of 0.6 at% in the source solution, attributing to the fact that the amount of a dye anchored on the surface of TiO₂ layer was the highest at this AA content. Although the conversion efficiency is relatively low, this finding leads to the possibility of an industrial production of a dye-sensitized solar cell in the near future.     

Effects of size and shape of dispersed poly(butylene terephthalate) on isothermal crystallization kinetics and morphology of poly(lactic acid) blends

The isothermal crystallization kinetics and morphology of the poly(lactic acid) (PLA) blends containing three different sizes of both spherical and fibrous poly(butylene terephthalate) (PBT) domains have been comparatively investigated by differential scanning calorimetry (DSC) and polarized optical microscopy (POM). The dynamic DSC measurement reveals that PBT domains significantly increase the degree of crystallinity of the PLA. Furthermore, the Avrami model is employed to evaluate the crystallization kinetics under isothermal conditions and it is found that PBT acts as nucleating agent, leading to a high overall crystallization rate constant k and shortened crystallization half time t_1/2. Furthermore, the crystallization rate of PLA is promoted with the incorporation of PBT with a large specific surface area. The average Avrami index n of all samples lies within the range of 3.3 ? 4.0, suggesting that morphologies of PBT do not affect the nucleation mechanism; however, the depression of equilibrium melting temperature in the blends ascribes the reductions of perfectness and size of the PLA crystallites. Besides, the nucleation of PLA crystallites around PBT fibers is probably faster than those around PBT spheres because the PBT chains oriented at the fiber surface as a result of flow‐induced crystallization during melt stretching may serve as the primary nuclei for PLA chains to drastically crystallize at the fiber surface. POLYM. ENG. SCI., 56:258–268, 2016. © 2015 Society of Plastics Engineers     

Thermal and gas permeation properties of copolymers derived from 3‐methacryloxypropyltris(trimethylsiloxy)silane and adamantyl group‐containing methacrylate derivatives

Novel copolymer membranes derived from three types of adamantyl group‐containing methacrylate derivatives and 3‐methacryloxypropyltris(trimethylsiloxy)silane (SiMA) were synthesized via free radical polymerization. The thermal and permeation properties of these copolymer membranes were investigated. Copolymer membranes with less than 11.9 mol % adamantane content exhibited good membrane forming abilities that are suitable for permeation measurement. The decomposition temperature of all copolymers increased up to approximately 40–80°C with increasing adamantane content compared with poly(SiMA). Moreover, the glass transition temperature (T_g) of all copolymers increased up to approximately 46–60°C with increasing adamantane content compared with the theoretical value, which was estimated from Fox equation. 1‐Adamantyl methacrylate copolymer had the highest fractional free volume among the three types of adamantly group‐containing methacrylate derivatives. The gas permeability coefficient of this copolymer increased by 22–45% with increasing adamantane content compared with that of poly(SiMA). © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43129.