Ring hydrogenation of naphthalene and 1-naphthol over supported metal catalysts in supercritical carbon dioxide solvent

Catalytic ring hydrogenations of naphthalene and 1-naphthol were studied over several supported metal catalysts in supercritical carbon dioxide solvent at low temperature. Higher concentration of hydrogen in supercritical carbon dioxide and lower reaction temperature were responsible for higher catalyst activity and selectivities to the desired partial ring hydrogenated products as compared with those observed in organic solvent for the same catalyst.     

Dehydration of Gels and Glasses in the Systems B2 O3-SiO2 and ZrO2-SiO2 Prepared by the Sol-Gel Process from Metal Alkoxides

Dehydration of gels prepared by the sol-gel process from metal alkoxides in the systems B₂O₃-SiO₂ and ZrO₂-SiO₂ was determined by measuring the shrinkage of the gel on heating. Dehydration was enhanced with increased ZrO₂ content, whereas it decreased with B₂O₃ content. Diffusion of water was also measured in the nonporous glasses obtained by heating the gels. The diffusion rate was independent of the composition of the glass.     

Thermal strain of high strength polyethylene fiber in low temperature

High strength polyethylene fiber (Toyobo, Dyneema® fiber: hereinafter abbreviated to DF) has a negative thermal expansion coefficient. Relation between fiber structure and thermal strain of DF used as reinforcement of DF reinforced plastic (DFRP) for cryogenic use was investigated. The crystallinities and orientation angles of several kinds of polyethylene fibers having different modulus from 15 to 134Gpa (herein after abbreviated to DFs) were measured by NMR and X‐ray. We obtained the parameters of the mechanical series‐parallel model composed of crystal and amorphous by crystallinity and modulus. Thermal expansion coefficients of DFs were estimated by mechanical series‐parallel model. All DFs having different modulus showed negative thermal expansion coefficients in the temperature range from 180 to 300K, and absolute values of those markedly increased by increasing tensile modulus of DF. The estimated thermal expansion coefficients showed negative values, and thermal strains showed a similar curve to observed ones mostly. Average thermal expansion coefficients in the temperature range from 180 to 300K estimated by mechanical model agreed with the observed ones. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 2918–2925, 2004     

Alternative technologies for biotechnological fuel ethanol manufacturing

The challenges of implementing biorefineries on a global scale include socioeconomic, financial, and technological constraints. In particular, the development of biorefineries is tightly linked to the continued availability of fermentation raw materials. These constraints can be relaxed by the use of diverse raw materials, while advances that confer higher flexibility would enable biotechnological plant managers to swiftly react to volatile markets. In conventional processes, Saccharomyces cerevisiae grows on a relatively limited range of substrates, and produces only a single product—ethanol. Given the observed maturity of the S. cerevisiae fermentation technology, alternatives to baker's yeast may be needed to tip the economic balance in favour of biotechnological ethanol. These alternative fermentation technologies may allow a greater diversity of substrates to be used to produce an individually tailored mix of ethanol and other chemicals. Copyright © 2007 Society of Chemical Industry     

Influence of activated carbon pore structure on oxygen reduction at catalyst layers supported on rotating disk electrodes

Carbon materials are often used as catalyst supports, and for catalysts in electrodes of a polymer electrolyte fuel cell, carbon black has been used. Recently, it was found, however, that activated carbon could replace carbon black and besides, significantly improve the activity of the electrode catalyst layer for oxygen reduction. In the present study, to optimize the pore structure of activated carbon for further activity improvement, the influence of the pore structure on the activity was investigated using activated carbon of various specific surface areas and mean pore diameters. A catalyst layer was formed from activated carbon loaded with platinum and a polymer electrolyte. The activity of the layer was measured in an oxygen-saturated perchloric acid solution, supporting the layer on a rotating glassy carbon disk electrode. We found that increases in the specific surface area and mean pore diameter increased the activity and that the latter was more effective than the former mainly due to the enhanced mass-transfer in the pores; the catalyst layer formed from activated carbon with the largest mean pore diameter was the most active. Unless pores excessively develop and lose connections between particles, a large pore diameter is therefore desired for the fuel cell electrodes.     

The electrocatalytic activities of the Pd-doped MnO2 for the chlorine evolution reaction

The anodic evolution of chlorine on the massive β-MnO₂ doped with various amounts of Pd was investigated in acidic chloride solution. A second-order relation was found between the rate of the chlorine evolution reaction and the number of active Pd sites at the electrode surface. And it was confirmed that, in the relatively low doped electrodes, the active sites are more effectively dispersed on the surface with microscopic homogeneity. From the activation energies, it was also suggested that the reaction mechanism on the MnO₂ doped with relatively small amounts of Pd is somewhat different from that on the pure PdO electrode.     

The reaction of polypropylene with maleic anhydride

An addition reaction of maleic anhydride with polypropylene takes place in the presence of radical reagents or sunlight. The initial rate of the reaction was proportional to the concentration of polypropylene and maleic anhydride, and one-half power of the concentration of the radical reagents. The increase in the temperature from 80 to 120°C increased the rate of the reaction and di-cumyl peroxide was effective as a radical reagent for this reaction. Ionic crosslinked rubber-like polymers were obtained from the reaction of maleic polypropylene with some alkali metal compounds. They showed the characteristic absorption band due to ? COO^? in their infrared spectra.     

Synthesis and electrode performance of layered nickel dioxide containing alkaline ions

Several polymorphs of layered nickel dioxide were prepared by using the chemical insertion of alkaline ions into Li_0.10NiO₂. We used aqueous AOH (A = Li, Na, K) solutions as reducing agents. Sodium and potassium insertion resulted in hydrated layered compounds that can be classified as γ-NiOOH with high crystallinity, while lithium insertion occurred without hydration. We discuss the coordination environment around the A⁺ ions for these inserted compounds. The thermal behavior, analyzed using high temperature (HT) X-ray diffraction (XRD) and thermogravimetric (TG) measurements, indicated that heating the hydrate at 150 °C yielded its dehydrate. The electrode performance of the nickelate was studied in lithium cells. We discuss the effect of interlayer water on cell rechargeability and the similarity between these nickelate and hydrated manganese dioxide (birnessite).     

Influence of the nigrosine dye on the thermal behavior of polyamide 66

To reveal the effect of the nigrosine dye, that the addition of the dye lowers the crystallization point (T_c) of molten polyamide resins with substantially no shift in the melting point (T_m), thus suppressing the crystallization enhancement of the crystalline nucleation agents, the characteristics of polyamide 66 (PA‐66) containing nigrosine dye EX (N‐EX) were investigated. Differential scanning calorimetry (DSC) analysis showed that the addition of N‐EX reduced the crystallization rate and T_c of molten PA‐66 with substantially no shift in T_m, and the crystallization enthalpy per unit of weight of PA‐66 was substantially constant. T_c of molten PA‐66 was lowered with an increase in the amount of N‐EX and reached its maximum at 13 wt % N‐EX. Dynamic mechanical analysis showed that the glass‐transition temperature and the secondary glass‐transition temperature increased with an increasing amount of the dye. On the other hand, the DSC and X‐ray diffraction results indicated that no dye molecule was present in the crystal structure of PA‐66. This effect of the nigrosine dye on PA‐66 is in contrast to those of crystalline nucleation agents, plasticizers, and antiplasticizers. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 3270–3274, 2006     

Granulation of a hardmetal powder for spark plasma sintering

A fluidized bed granulation method, pressure swing granulation (PSG), was applied to granulation of a hardmetal powder without pressing lubricants for making the upstream process of spark plasma sintering (SPS) more efficient.

The properties of the granules were examined and compared with those of spray dried granules and extruded ones under the present system using a sieve.

Spherical granules between 0.15 and 0.84 mm in diameter difficult to obtain by the spray drying were obtained with high yield. The flowability of the granules was far better than that of spray dried granules and similar to that of extruded ones. Iron contamination and oxidization during pressure swing granulation were tolerable to the real production.