Vibration analysis of a contact slider/gimbal of a flexible disk drive

 To design contact-type gimbal system for a newly developed removable flexible disk drive called Card size flexible disk drive (CFDD) (Shinpuku et al., 2001; Ryoson et al., 2001), the gimbal's vibration characteristics in the disk-rotation direction were measured and simulated using FEM. To determine the relationship between vibration and friction in the head disk interface (HDI), a hard disk was also used. The friction characteristics were inserted into the FEM model based on the results. The gimbal was modified to suppress vibration amplitude to half in both simulation and experiment. Received: 5 July 2001/Accepted: 1 November 2001 Paper presented at the 12th Annual Symposium on Information Storage and Processing Systems, Santa Clara, CA, USA, 28–29 June, 2001.     

Visualization of epileptogenic phenomena using cross-correlation analysis: localization of epileptic foci and propagation of epileptiform discharges

The main objectives of the preoperative evaluation of a patient with medically intractable epileptic seizures are localization of the foci and propagation of the epileptiform discharges. Electrocorticographic (ECoG) data of intractable focal epilepsy were analyzed using an AR model, wavelet analysis, and cross-correlation analysis. In order to derive the time-shifts, the cross correlations of the epileptiform discharges were calculated between electrodes for every unit of time. Further analyses were made by means of a set of contour maps of the time-shifts and sequential two- and three-dimensional visualizations of the time-shift maps in order to localize the epileptic foci and study their propagation process. Two types of foci and propagation were revealed in the results. In the first type, epileptiform discharges were generated at localized focal sites and spread quickly to other sites. In the second type, the foci of epileptiform discharges, which appeared soon after the former bursts, were localized at more than one site, and the discharges tended to spread more slowly. The findings suggest that epileptic phenomena can be caused by at least two kinds of mechanisms in one patient: in the former, the propagation might be mediated through synaptic projections, while in the latter, the extracellular diffusion of an excitatory factor might play an important role. In addition, our newly developed visualization technique for the localization of epileptic foci and the propagation of epileptiform discharges should prove useful in the study of epileptogenesis etiology.     

Space charge behavior in polymer film based on increment of capacitance under AC high field

Polymer materials have excellent dielectric and insulation properties; however, those properties in AC high field region have not been known well. Recently we established an evaluation method of high‐field AC dissipation current waveform of polymer materials 1 . AC dissipation current waveforms of polyethylene and polypropylene films show nonlinear distortion in AC high‐field region. This nonlinearity was thought to be related to the behavior of AC space charge formation in the sample near electrodes. The properties of space charge formed under AC high field at power frequency seem to differ from those formed under DC high field. The measurement of AC space charge distribution is not so easy due to the resolution limit of the space charge measurement. We studied the dielectric properties of biaxially oriented polypropylene (BOPP) film under AC high field up to 120 °C. It was found that tan δ, AC dissipation current (Ixr), and unbalanced component of capacitive current (ΔIxc) increased when the temperature became higher. In particular, ΔIxc increased above some threshold field and was considered to be due to the AC space charge formation. This AC space charge layer near electrode is thought to be formed due to carrier injection under AC high‐field application. Usually, the carrier mobility becomes smaller on lowering the temperature. Most of the carriers injected from the electrode are trapped near the electrode in the sample film. But in the high‐temperature region, the carrier mobility becomes larger and the carrier injection starts to increase from lower field. Many more carriers are injected from the electrode. It is thought that some of the injected carriers are trapped inside the sample film; the others go through the sample to the opposite side. © 2002 Wiley Periodicals, Inc. Electr Eng Jpn, 141(2): 8–16, 2002; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.10018     

Tan δ of ethylene-propylene rubber in cryogenic temperature region–effects of additives and sample thickness

The authors have been developing extruded polymer insulated superconducting power cables. Dielectric loss in electrical insulation cannot be ignored in superconducting cables since conductor loss in the cables is minimal. Studies so far show that ethylene-propylene rubber (EPR) is suitable as an electrical insulating material in the extruded polymer insulated superconducting cable design because it demonstrates excellent mechanical and relatively good electrical qualities at a cryogenic temperature. Widely used EPR includes some kinds of additives; however, their effect on tan δ of EPR at cryogenic temperature remains unknown. The effect of additives such as crosslinking agent and fillers on tan δ of EPR was examined at temperatures of between 4.2 K and 300 K. Thickness dependence of tan δ was also measured using EPR films of different thickness and an extruded EPR insulated cable sample. The results show that additives increase tan δ of relatively thin films of EPR even in the cryogenic temperature region; however, they do not have an intolerable dielectric loss in comparison with conductor loss and heat inflow of the superconducting cable. The remedy to tan δ increase due to the polymer contraction relative to shielding wires has been established.     

Apertureless tip-enhanced Raman microscopy with confocal epi-illumination/collection optics

It is demonstrated that confocal epi-illumination/collection optics can be effectively used to generate surface-enhanced Raman scattering at the near-field region of a gold-coated tip for an atomic force microscope operated in semi-contact tapping mode. When the tip, with a 50-nm apex radius, was illuminated by a highly focused laser beam at 532 nm and approached the isolated diamond particle, with a size of approximately 1 microm, the Raman signal was enhanced by approximately 10(3). This result is in good agreement with numerical simulations performed by the finite difference time-domain method. Since our apertureless microscope is based on readily available conventional components, there is wide room for improvements and modifications by common users in various applications of micro-Raman analysis.     

Large graded-index preforms fabricated by high-rate VAD

A large preform for 220 km of fibre was fabricated with the vapour-phase axial deposition (VAD) method. The deposition rate for the core was 1.7 g/min. Optical fibre drawn from a part of the preform had optical attenuation of 0.58 dB/km and bandwidth 500 MHz km0.9 at a wavelength of 1.3 ?m.