Influence of Water on the Compression Behavior of Decomposed Granite Soil

In order to investigate the influence of water on compression characteristics of decomposed granite soils, single-particle crushing and one-dimensional compression tests were carried out on three types of decomposed granite soils as well as on quartz-rich silica sand under both dry and wet conditions. Results showed that the initial crushing strength of a single particle was reduced and strength variability increased due to the weakening effects induced by the presence of water. Moreover, it was observed that the one-dimensional compression behavior of decomposed granite soil was related to the initial crushing strength. Finally, the magnitude of initial crushing strength was also affected by the degree of weathering of the soil.     

A novel ferromagnetic thermo-stent for plaque stabilization that self-regulates the temperature

The purpose of this study is to investigate the vascular wall with a thermally self-regulating, cylindrical stent made of a low Curie temperature ferromagnetic alloy. Physiologic saline was circulated in the silicone model vessel implanted with the stent. The stent-temperature remained nearly constant for variable saline flows, saline temperatures, and magnetic flux densities. Stent implants of this type in human blood vessels could potentially enable thermotherapy and temperature determination without catheterization.     

Saccharomyces cerevisiae Big1p,a putative endoplasmic reticulum membrane protein required for normal levels of cell wall beta-1,6-glucan

Deletion of Saccharomyces cerevisiae BIG1 causes an approximately 95% reduction in cell wall beta-1,6-glucan, an essential polymer involved in the cell wall attachment of many surface mannoproteins. The big1 deletion mutant grows very slowly, but growth can be enhanced if cells are given osmotic support. We have begun a cell biological and genetic analysis of its product. We demonstrate, using a Big1p-GFP fusion construct, that Big1p is an N-glycosylated integral membrane protein with a Type I topology that is located in the endoplasmic reticulum (ER). Some phenotypes of a big1Delta mutant resemble those of strains disrupted for KRE5, which encodes another ER protein affecting beta-l,6-glucan levels to a similar extent. In a big1Deltakre5Delta double mutant, both the growth and alkali-soluble beta-l,6-glucan levels were reduced as compared to either single mutant. Thus, while Big1p and Kre5p may have similar effects on beta-l,6-glucan synthesis, these effects are at least partially distinct. Residual beta-l,6-glucan levels in the big1Deltakre5Delta double mutant indicate that these gene products are unlikely to be beta-l,6-glucan synthase subunits, but rather may play some ancillary roles in beta-l,6-glucan synthase assembly or function, or in modifying proteins for attachment of beta-l,6-glucan.     

A carbon dioxide gas sensor by combination of multivalent cation and anion conductors with a water-insoluble oxycarbonate-based auxiliary electrode

A compact and inexpensive carbon dioxide gas sensor was successfully realized by the combination of a divalent magnesium ionic conductor of Mg0.7(Zr0.85Nb0.15)4P6O24 and a divalent oxide anion conducting ZrO2-Y2O3 solid electrolyte with the water-insoluble Li- and Ba-codoped Nd2O2CO3 solid solution as the auxiliary electrode. The sensor response was continuous and reproducible, and the present sensor also demonstrated a theoretical Nernst response in the atmosphere where water vapor, nitrogen oxides, ammonia, etc., coexist. The exposure of the present sensor to water dew and variation in oxygen concentration does not interfere with the sensor response, which will be a great advantage in applying the in situ practical CO2 detection in combustion exhaust gas atmospheres.     

Numerical prediction of fraction of eutectic phase in Sn−Ag−Cu soldring using the phase-field method

A combination of macroscale solidification simulation and phase-field calculation is employed to predict the volume fraction of the eutectic phase in Sn-4.0 mass% Ag-XCu solder alloys (X=0.5–1.1 mass%). The solidification simulation incorporates the cooling rate in the phase-field simulation. We assume the residual liquid solidifies as eutectic phase when the driving force for the nucleation of Cu₆Sn₅ amounts to a critical value, which is determined based on the experimental data. Though the calculation results depend on the experimental data, the obtained fractions are about 40% for 0.5 mass% Cu and more than 90% for 1.1 mass% Cu alloy, which shows good agreement with the experimental data.     

Space charge behavior in polymer film based on increment of capacitance under AC high field

Polymer materials have excellent dielectric and insulation properties; however, those properties in AC high field region have not been known well. Recently we established an evaluation method of high‐field AC dissipation current waveform of polymer materials 1 . AC dissipation current waveforms of polyethylene and polypropylene films show nonlinear distortion in AC high‐field region. This nonlinearity was thought to be related to the behavior of AC space charge formation in the sample near electrodes. The properties of space charge formed under AC high field at power frequency seem to differ from those formed under DC high field. The measurement of AC space charge distribution is not so easy due to the resolution limit of the space charge measurement. We studied the dielectric properties of biaxially oriented polypropylene (BOPP) film under AC high field up to 120 °C. It was found that tan δ, AC dissipation current (Ixr), and unbalanced component of capacitive current (ΔIxc) increased when the temperature became higher. In particular, ΔIxc increased above some threshold field and was considered to be due to the AC space charge formation. This AC space charge layer near electrode is thought to be formed due to carrier injection under AC high‐field application. Usually, the carrier mobility becomes smaller on lowering the temperature. Most of the carriers injected from the electrode are trapped near the electrode in the sample film. But in the high‐temperature region, the carrier mobility becomes larger and the carrier injection starts to increase from lower field. Many more carriers are injected from the electrode. It is thought that some of the injected carriers are trapped inside the sample film; the others go through the sample to the opposite side. © 2002 Wiley Periodicals, Inc. Electr Eng Jpn, 141(2): 8–16, 2002; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.10018     

Ipidacrine (NIK-247), a novel antidementia, rapidly enters the brain and improves scopolamine-induced amnesia in rats during the Morris water maze task

The effects of single and repeated administrations of ipidacrine (NIK-247, 9-amino-2, 3, 5, 6, 7, 8-hexahydro-1H-cyclopenta [b] quinoline monohydrochloride monohydrate) on scopolamine-induced spatial learning deficit were investigated in rats using the Morris water maze task. A single oral administration of ipidacrine (0.3 and 1 mg/kg) reduced the increased total latency induced by scopolamine in this task. The repeated administration of ipidacrine (1 mg/kg) of once a day for 5 successive days reduced the increased total latency induced by scopolamine to the levels of the saline-treated control rats in this task. In this pharmaco-kinetic study, ipidacrine was rapidly taken up into the brain within 5 min. Moreover, higher drug levels were observed mainly in the cortex and hippocampus, which both play important roles in learning and memory. Thus, a previous study together with this investigation indicate that ipidacrine improves amnesia which consists of the impairment of the working and reference memory in various animal models, suggesting that ipidacrine is a useful candidate for the therapy of patients with Alzheimer's disease.     

Correlation in Staphylococcus aureus infections between toxic shock syndrome toxin-1 production and clinical feature

Catastrophic stress induced by Hanshin-Awaji earthquake seems to promote rheological deterioration associated with high blood pressure, increased blood viscosity due to hemoconcentration and increased fibrinogen level. These changes lead to prolonged endothelial cell dysfunction demonstrating high levels of von Willebrand factor, tissue type plasminogen activator and plasmin.alpha 2 plasmin inhibitor complex, and accelerate fibrin turnover as the result of a high D-dimer level from the post earthquake period until 4-6 months later. There were remarkable changes in biochemical parameters except for uric acid, BUN, triglyceride level. An increase in these acute changes caused by mental and physical stress might trigger obstructive thrombus in coronary arteries in the elderly after an earthquake. In conclusion, earthquake induced stress could be considered a transient cardiovascular risk factor.     

Tan δ of ethylene-propylene rubber in cryogenic temperature region–effects of additives and sample thickness

The authors have been developing extruded polymer insulated superconducting power cables. Dielectric loss in electrical insulation cannot be ignored in superconducting cables since conductor loss in the cables is minimal. Studies so far show that ethylene-propylene rubber (EPR) is suitable as an electrical insulating material in the extruded polymer insulated superconducting cable design because it demonstrates excellent mechanical and relatively good electrical qualities at a cryogenic temperature. Widely used EPR includes some kinds of additives; however, their effect on tan δ of EPR at cryogenic temperature remains unknown. The effect of additives such as crosslinking agent and fillers on tan δ of EPR was examined at temperatures of between 4.2 K and 300 K. Thickness dependence of tan δ was also measured using EPR films of different thickness and an extruded EPR insulated cable sample. The results show that additives increase tan δ of relatively thin films of EPR even in the cryogenic temperature region; however, they do not have an intolerable dielectric loss in comparison with conductor loss and heat inflow of the superconducting cable. The remedy to tan δ increase due to the polymer contraction relative to shielding wires has been established.     

Aging behavior and surge endurance of 870-900 nm AlGaAs lasers with nonabsorbing mirrors

The reliability of 870-900 nm AlGaAs TJS lasers has been investigated. An emission wavelength longer than 870 nm is realized by utilizing the band tailing effect due to heavy Zn-diffusion in the active region. A nonabsorbing mirror structure is employed to eliminate both gradual degradation and catastrophic damage of the facets. Stable continuous operation for over 10 000 hours has been confirmed at ambient temperatures higher than 50°C and output powers more than 5 mW/ facet. MTTF longer than 10⁵hours is expected for screened devices. Surge endurance has been improved to be nearly one order of magnitude higher than that for a conventional structure.