Light‐Activated,Multi‐Semiconductor Hybrid Microswimmers

Using a dynamic fabrication process, hybrid, photoactivated microswimmers made from two different semiconductors, titanium dioxide (TiO₂) and cuprous oxide (Cu₂O) are developed, where each material occupies a distinct portion of the multiconstituent particles. Structured light‐activated microswimmers made from only TiO₂ or Cu₂O are observed to be driven in hydrogen peroxide and water most vigorously under UV or blue light, respectively, whereas hybrid structures made from both of these materials exhibit wavelength‐dependent modes of motion due to the disparate responses of each photocatalyst. It is also found that the hybrid particles are activated in water alone, a behavior which is not observed in those made from a single semiconductor, and thus, the system may open up a new class of fuel‐free photoactive colloids that take advantage of semiconductor heterojunctions. The TiO₂/Cu₂O hybrid microswimmer presented here is but an example of a broader method for inducing different modes of motion in a single light‐activated particle, which is not limited to the specific geometries and materials presented in this study.     

The Influence of Carbon Nitride Nanosheets Doping on the Crystalline Formation of MIL‐88B(Fe) and the Photocatalytic Activities

In this research, bulk graphitic carbon nitride (g‐C₃N₄) is exfoliated and transferred to the carbon nitride nanosheets (CNNSs), which are then coupled with MIL‐88B(Fe) to form the hybrid. From the results of the powder X‐ray diffraction, scanning electronic microscopy and thermogravimetric analysis, it is found that the doping of CNNSs on the surface of MIL‐88(Fe) could maintain the basic structure of MIL‐88B(Fe), and the smaller dimension of CNNSs might influence the crystallization process of metal‐organic frameworks (MOFs) compared to bulk g‐C₃N₄. Besides, the effects of the CNNSs incorporation on photocatalysis are also investigated. Through the photoluminescence spectra, electrochemical measurements, and photocatalytic experiments, the hybrid containing 6% CNNSs is certified to possess the highest catalytic activity to degrade methylene blue and reduce Cr(VI) under visible light. The improvement of the photocatalytic performance can be attributed to the matched energy level which favors the formation of the heterojunctions. Besides, it promotes the charge migration such that the contact between MOFs and CNNSs is more intimate, which can be inferred from the electronic microscopy images. Finally, a possible photocatalytic mechanism is put forward by the relative calculation and the employment of the scavengers to trap the active species.     

Highly Uniform Resistive Switching Properties of Solution‐Processed Silver‐Embedded Gelatin Thin Film

The silver‐embedded gelatin (AgG) thin film produced by the solution method of metal salts dissolved in gelatin is presented. Its simple fabrication method ensures the uniform distribution of Ag dots. Memory devices based on AgG exhibit good device performance, such as the ON/OFF ratio in excess of 10⁵ and the coefficient of variation in less of 50%. To further investigate the position of filament formation and the role of each element, current sensing atomic force microscopy (CSAFM) analysis as well as elemental line profiles across the two different conditions in the LRS and HRS are analyzed. The conductive and nonconductive regions in the current map of the CSAFM image show that the conductive filaments occur in the AgG layer around Ag dots. The migration of oxygen ions and the redox reaction of carbon are demonstrated to be the driving mechanism for the resistive switching of AgG memory devices. The results show that dissolving metal salts in gelatin is an effective way to achieve high‐performance organic–electronic applications.     

Green Synthesis of Hierarchically Porous Carbon Nanotubes as Advanced Materials for High‐Efficient Energy Storage

Hierarchically porous carbon nanomaterials with well‐defined architecture can afford a promising platform for effectively addressing energy and environmental concerns. Herein, a totally green and straightforward synthesis strategy for the fabrication of hierarchically porous carbon nanotubes (HPCNTs) by a simple carbonization treatment without any assistance of soft/hard templates and activation procedures is demonstrated. A high specific surface area of 1419 m² g^?1 and hierarchical micro‐/meso‐/macroporosity can be achieved for the HPCNTs. The unique porous architecture enables the HPCNTs serving as excellent electrode/host materials for high‐performance supercapacitors and Li–sulfur batteries. The design strategy may pave a new avenue for the rational synthesis of hierarchically porous carbon nanostructures for high‐efficient energy storage applications.     

An Electroactive and Transparent Haptic Interface Utilizing Soft Elastomer Actuators with Silver Nanowire Electrodes

An electroactive and transparent haptic interface having a rectangular void pattern creates tunable surface textures by controlling the wavelength and amplitude of independent void‐lines. To make an active tactile surface, the transparent haptic interface employs a silver nanowire (AgNW) electrode to be compliant with the deformed elastomer surface. Here, the dielectric elastomer is newly blended with polydimethylsiloxane and Ecoflex prepolymer to simultaneously control the mechanical stiffness and transparency. The relative resistance of the AgNW electrode on a single void line is nearly unchanged under bending test, confirming the high stretchability and conductivity of the nanowire‐networked electrode. The optical transparencies are 92–85%, depending on the ratio of the Ecoflex solution. Transparency values decreas by 7 and 16% after coating with AgNWs at densities of 30 and 140 mg m^?2, respectively. Using EP31, the void line is deformed by 90 µm under a field intensity of 13.0 V µm^?1. The haptic surface is successfully controlled by applying voltage, which produces four different surface textures, from relatively smooth to rough feeling, depending on the distance between deformed void lines. This haptic interface can be applied to diverse display systems as an external add‐on screen and will help to realize programmable surface textures in the future.     

Fabricating Ir/C Nanofiber Networks as Free‐Standing Air Cathodes for Rechargeable Li‐CO2 Batteries

Li‐CO₂ batteries are promising energy storage systems by utilizing CO₂ at the same time, though there are still some critical barriers before its practical applications such as high charging overpotential and poor cycling stability. In this work, iridium/carbon nanofibers (Ir/CNFs) are prepared via electrospinning and subsequent heat treatment, and are used as cathode catalysts for rechargeable Li‐CO₂ batteries. Benefitting from the unique porous network structure and the high activity of ultrasmall Ir nanoparticles, Ir/CNFs exhibit excellent CO₂ reduction and evolution activities. The Li‐CO₂ batteries present extremely large discharge capacity, high coulombic efficiency, and long cycling life. Moreover, free‐standing Ir/CNF films are used directly as air cathodes to assemble Li‐CO₂ batteries, which show high energy density and ultralong operation time, demonstrating great potential for practical applications.     

Single Nanoparticle Magnetic Spin Memristor

There is an increasing demand for the development of a simple Si‐based universal memory device at the nanoscale that operates at high frequencies. Spin‐electronics (spintronics) can, in principle, increase the efficiency of devices and allow them to operate at high frequencies. A primary challenge for reducing the dimensions of spintronic devices is the requirement for high spin currents. To overcome this problem, a new approach is presented that uses helical chiral molecules exhibiting spin‐selective electron transport, which is called the chiral‐induced spin selectivity (CISS) effect. Using the CISS effect, the active memory device is miniaturized for the first time from the micrometer scale to 30 nm in size, and this device presents memristor‐like nonlinear logic operation at low voltages under ambient conditions and room temperature. A single nanoparticle, along with Au contacts and chiral molecules, is sufficient to function as a memory device. A single ferromagnetic nanoplatelet is used as a fixed hard magnet combined with Au contacts in which the gold contacts act as soft magnets due to the adsorbed chiral molecules.