Enhancement of interconnected power system stability using a control strategy involving static phase shifters

The static phase shifting transformer is one of the potential options of the recently proposed FACTS (flexible AC transmission systems). Promising results have been obtained for enhancing the small-disturbance and the transient stability of interconnected power systems.

In this paper, the important concept of involving in the same control strategy both generating units and static phase shifters has been considered. A systematic procedure for designing co-ordinated and decentralized controllers of these components is provided to assure a satisfactory dynamic performance of an interconnected power system under both small and large perturbations. The approach uses optimal control theory as a basis for the co-ordination of static phase shifter and governor controllers. A suboptimal decentralized control scheme is derived from the designed optimal controller by using a ‘minimum norm’ nearness criterion. The resulting feedback control signals for each generating unit and for each phase shifter is expressed in terms of measurable and local variables only.

Test results show the effectiveness of the proposed control strategy and the usefulness of control actions on static phase shifters.     

Time to relapse has prognostic value in patients with aggressive lymphoma enrolled onto the Parma trial

PURPOSE: The purpose of this study was to investigate the prognostic value of time to relapse in 188 adult patients with intermediate- or high-grade non-Hodgkin's lymphoma (NHL) included on the Parma trial at the time of their first relapse. PATIENTS AND METHODS: The median follow-up of these patients is 102 months after registration onto the Parma study. Time to relapse was calculated from initial diagnosis, and a cutoff of 12 months was used to separate 77 patients defined as early relapse from 111 patients defined as late relapse. RESULTS: Patients with early and late relapses had significantly different overall response rates to salvage therapy with two courses of dexamethasone, high-dose cytarabine, and cisplatin (DHAP; 40% v 69%; P=.00007) and different 8-year survival rates (13% v 29%; P=.00001). Features at relapse with a negative prognostic value in univariate analysis were higher than normal lactic dehydrogenase (LDH) levels, tumor size greater than 5 cm, Ann Arbor stages III to IV, and Karnofsky score less than 80%. Therefore, multivariate analyses were performed. Time to relapse (P=.001) and LDH levels at relapse (P=.003) had independent prognostic value, whereas tumor size did not reach statistical significance in the logistic model that predicted overall response after two courses of DHAP. The study of prognostic factors for overall survival (OS) and progression-free survival (PFS) confirmed the prognostic value of time to relapse (P < .0001 for OS and P=.005 for PFS) independent of response or treatment after two courses of DHAP. CONCLUSION: Time to relapse may be used to stratify patients at time of first relapse of intermediate to high-grade non-Hodgkin's lymphoma.     

Multimode equivalent network representation for the scattering frommultistrip gratings

A multimode equivalent network representation (MEN) is proposed for the scattering from a multistrip grating. Previously, rigorous analytical results were developed involving gratings with one or two strips in a period. In the present paper, the MEN representation is extended to planar gratings with an arbitrary number of strips or apertures per unit cell. Both TE and TM incidence are described. The extension is obtained combining the MEN formulation with the method of moments solution (MoM) of the relevant integral equation. The code thus obtained retains the key feature of the MEN representation, namely the frequency independence of the characterization, and is much more flexible than the analytical solutions previously derived. The MoM solution procedure is described in detail and several application examples are discussed     

On the Extendibility of Near-MDS Elliptic Codes

The Main Conjecture on maximum distance separable (MDS) codes states that, except for some special cases, the maximum length of a q-ary linear MDS code of is q+1. This conjecture does not hold true for near maximum distance separable codes because of the existence of q-ary near-MDS elliptic codes having length bigger than q+1. An interesting related question is whether a near-MDS elliptic code may be extended to a longer near-MDS code. In this paper we prove some non-extendibility results for certain near-MDS elliptic codes.     

MIPAS-ENVISAT limb-sounding measurements: trade-off study for improvement of horizontal resolution

The Michelson Interferometer for Passive Atmospheric Sounding (MIPAS) is a limb-scanning spectrometer that has operated onboard the Environmental Satellite since the end of March 2002. Common features of limb-scanning experiments are both high vertical resolution and poor horizontal resolution. We exploit the two-dimensional geo-fit retrieval approach [Appl. Opt. 40, 1872-1875 (2001)] to investigate the possibility of improving the horizontal resolution of MIPAS measurements. Two different strategies are considered for this purpose, one exploiting the possibility (offered by the geo-fit analysis method) for an arbitrary definition of the retrieval grid, the other based on the possibility of saving measurement time by degrading the spectral resolution of the interferometer. The performances of the two strategies are compared in terms of the trade-off between the attained horizontal resolution and the retrieval precision. We find that for ozone it is possible to improve by a factor of 2 the horizontal resolution, which in the nominal measurement plan is approximately 530 km. This improvement corresponds to a degradation of the retrieval precision, which on average varies from a factor of 1.4 to 2.5, depending on the adopted spectral resolution.     

An Integrated CMOS Front-End for Optical Absolute Rotary Encoders

This paper presents a front-end circuit for optical rotary encoders. The light pulses modulated by the encoder disc are transduced into current signals, which are pre-processed and converted into digital waveforms related to the disc angular position information. The proposed front-end circuit is compensated against temperature drifts. Digitally programmable calibration is provided to account for spreads in impinging light pulse power. Measurement results on integrated prototypes are shown, demonstrating correct operation of the front-end with an optical input power from 0.5 W to 3 W up to a signal frequency of 500 kHz in a temperature range from 0 °C to 80 °C.     

Houghton anastigmatic telescope containing aspheric mirrors that allows corrector position as a free parameter

A family of catadioptric telescopes is investigated, characterzied with two-element, full-aperture afocal corrector lenses and aspherical, focusing, primary mirrors or primary-secondary mirror combination. Third-order aberration and design equation are provided for anastigmatic systems in which corrector position must be a free parameter, forcing the consideration of aspherics on the mirrored surfaces.     

Engineered articular cartilage: influence of the scaffold on cell phenotype and proliferation

Articular cartilage defects do not heal. Biodegradable scaffolds have been studied for cartilage engineering in order to implant autologous chondrocytes and help cartilage repair. We tested some new collagen matrices differing in collagen type, origin, structure and methods of extraction and purification, and compared the behavior of human chondrocytes cultured on them. Human chondrocytes were grown for three weeks on four different equine type I collagen matrices, one type I, III porcine collagen matrix and one porcine type II collagen matrix. After 21 days, samples were subjected to histochemical, immunohistochemical and histomorphometric analysis to study phenotype expression and cell adhesion. At 7, 14 and 21 days cell proliferation was studied by incorporation of [3H]-thymidine. Our data evidence that the collagen type influences cell morphology, adhesion and growth; indeed, cellularity and rate of proliferation were significantly higher and cells were rounder on the collagen II matrix than on either of the collagen I matrices. Among the collagen I matrices, we observed a great variability in terms of cell adhesion and proliferation. The present study allowed us to identify one type I collagen matrix and one type II collagen matrix that could be usefully employed as a scaffold for chondrocyte transplantation.     

Using recurrent neural networks to detect changes in autocorrelated processes for quality monitoring

With the growing of automation in manufacturing, process quality characteristics are being measured at higher rates and data are more likely to be autocorrelated. A widely used approach for statistical process monitoring in the case of autocorrelated data is the residual chart. This chart requires that a suitable model has been identified for the time series of process observations before residuals can be obtained. In this work, a new neural-based procedure, which is alleviated from the need for building a time series model, is introduced for quality control in the case of serially correlated data. In particular, the Elman’s recurrent neural network is proposed for manufacturing process quality control. Performance comparisons between the neural-based algorithm and several control charts are also presented in the paper in order to validate the approach. Different magnitudes of the process mean shift, under the presence of various levels of autocorrelation, are considered. The simulation results indicate that the neural-based procedure may perform better than other control charting schemes in several instances for both small and large shifts. Given the simplicity of the proposed neural network and its adaptability, this approach is proved from simulation experiments to be a feasible alternative for quality monitoring in the case of autocorrelated process data.     

A 0.18 μm CMOS direct down-converter for highly integrated 3G receivers

This paper presents the design of a high dynamic range direct down-converter for 3G cell-phone applications. The mechanisms responsible for second-order intermodulation distortion are discussed in details, leading to the following design strategy: the transconductor is degenerated by means of an RC filter, an LC network resonating at RF frequency loads the switching pair and carefully matched resistors are used in the output load. Prototypes realized in 0.18 μm CMOS show: +78 dBm IIP2 minimum among 40 samples, +10 dBm IIP3, 4 nV/√Hz input-referred noise density while burning only 4 mA from 1.8 V.