NURBS based least‐squares finite element methods for fluid and solid mechanics

This contribution investigates the performance of a least‐squares finite element method based on non‐uniform rational B‐splines (NURBS) basis functions. The least‐squares functional is formulated directly in terms of the strong form of the governing equations and boundary conditions. Thus, the introduction of auxiliary variables is avoided, but the order of the basis functions must be higher or equal to the order of the highest spatial derivatives. The methodology is applied to the incompressible Navier–Stokes equations and to linear as well as nonlinear elastic solid mechanics. The numerical examples presented feature convective effects and incompressible or nearly incompressible material. The numerical results, which are obtained with equal‐order interpolation and without any stabilisation techniques, are smooth and accurate. It is shown that for p and h refinement, the theoretical rates of convergence are achieved. Copyright © 2014 John Wiley & Sons, Ltd.     

STRATIGRAPHY AND PETROLEUM GEOLOGY OF THE CROATIAN PART OF THE ADRIATIC BASIN

Coastal parts of Croatia are dominated by the SW‐verging Dinaric foldbelt, to the west and SW of which is the Adriatic Basin (the stable foreland). In both areas, the stratigraphic column is dominated by a thick carbonate succession ranging from Carboniferous to Miocene. Four megasequences have been identified: (i) a pre‐platform succession ranging in age from Late Carboniferous (Middle Pennsylvanian: Moscovian) to Early Jurassic (Early Toarcian; Bru?ane and Ba?ke Ostarije Formations); (ii) an Early Jurassic to Late Cretaceous platform megasequence (Mali Alan Formation); (iii) a Paleogene to Neogene post‐platform megasequence (Ra?a Formation); and (iv) a Neogene to Quaternary (Pliocene to Holocene) megasequence (Istra and Ivana Formations). A number of organic‐rich intervals with source rock potential have been identified on‐ and offshore Croatia: Middle and Upper Carboniferous, Upper Permian, Lower and Middle Triassic, Lower and Upper Jurassic, Lower and Upper Cretaceous, Eocene, and Pliocene – Pleistocene. Traps and potential plays have been identified from seismic data in the Dinaric belt and adjacent foreland. Evaporites of Permian, Triassic and Neogene (Messinian) ages form potential regional seals, and carbonates with secondary porosity form potential reservoirs. Oil and gas shows in wells in the Croatian part of the Adriatic Basin have been recorded but no oil accumulations of commercial value have yet been discovered. In the northern Adriatic offshore Croatia, Pliocene hemi‐pelagic marlstones and shales include source rocks which produce commercial volumes of biogenic gas. The gas is reservoired in unconsolidated sands of the Pleistocene Ivana Formation.     

Periodical Literature in Urban Studies and Planning

Geographic information systems have the potential to aid planning functions in both data processing and decision making. Because the incorporation of GIS technology into local government is at an early stage, knowledge about GIS implementation and its impact on planning activities is scarce. Using a survey of local governments in four southeastern states, this paper explores how the new technology affects planning and whether it meets the expectations of the planning agencies using it. Most of the agencies surveyed report improvements in communication of information, data accessibility, and data accuracy. They report that more current data are available, and they have confidence in analyses performed with GIS technology. Political support, staffing, length of experience with GIS technology, system sharing, data-base contents, and number and type of GIS applications all exert some influence on either planning operations or decision making. While experience with GIS emerged as the most significant factor in achieving operational benefits, using GIS technology for analytical tasks positively affected improvements in decision making.     

Recovery of flavonoids from grape skins by enzyme-assisted extraction

Grape skin contains large amounts of different flavonoids so it can be used for their recovery. Optimization of enzyme-assisted extraction of flavonoids was conducted using oenological enzyme preparations with respect to enzyme dosage, temperature, extraction time, pH, and enzyme preparation. Optimal conditions were obtained using enzyme preparation Lallzyme EX-V, at the temperature of 45°C, time of 3 h, pH 2.0, and enzyme dosage of 10.52 mg/g. The new optimized extraction method is less expensive, simple, accurate, and selective for the recovery of simple flavonoids. It is based on an environmentally-friendly extraction solvent which may provide a valuable alternative to conventional methods.     

Optimization of supercritical CO2 extraction of dried Helichrysum italicum flowers by response surface methodology: GC-MS profiles of the extracts and essential oil

Supercritical (SC) CO₂ extraction of dried Immortelle flowers was performed at different process parameters. The optimal extraction conditions related to the yield were determined by response surface methodology (yield 4.09% at 20 MPa and 52°C). The extracts were analyzed by GC-MS and tremetone derivatives dominated: bitalin A, 12-acetoxytremetone, gnaphaliol, 1-[2-(2-methyl-2,3-dihydroxypropyl)-2,3-dihydro-1-benzofuran-5-yl]ethanone, isobutyl bitalin A, and 1-[2-(acetylprop-1-en-2-yl)-3-hydroxy-2,3-dihydro-1-benzofuran-5-yl]ethanone. Striking differences were found among the essential oil and SC-CO₂ extracts composition. The major oil compounds were γ-curcumene, α-pinene, β-selinene, α-selinene, and limonene. Mono- and sesquiterpene were found among minor constituents of the extracts. Neryl acetate was present in the extracts and essential oil.     

Polyethylene/Polycaprolactone Nanocomposite Films for Food Packaging Modified with Magnetite and Casein: Oxygen Barrier,Mechanical, and Thermal Properties

Polyethylene (PE) was modified and prepared as double-layer polyethylene/polycaprolactone (PE/PCL) film. Magnetite and casein were added to the PCL-coating film to improve barrier properties and prevent destruction of basic structure of primary polymer PE. Significant improvements were observed with regards to mechanical (tensile strength, elongation at break) and thermal properties, while barrier (O₂ permeability) properties were slightly improved. Overall migration values into acetic acid were lower (from 1 to 4.6 mg/dm²) than the upper limit set by the legislation. Specific migration of iron in PE/PCL-Fe samples is also below (µg/L) specific migration limit value set by the legislation (mg/kg).     

Simultaneous oxidation of aromatic compounds using Sr-doped lanthanum manganites as catalysts

Strontium-doped lanthanum manganites, La_1-xSr_xMnO₃ (LSMO), are promising and affordable catalysts for oxidative degradation of volatile organic compounds. LSMO catalysts (x = 0, .1, .2, and .3) were prepared by the citrate-nitrate autocombustion (CNA) and coprecipitation synthesis. The phase composition was confirmed by X-ray diffraction and Rietveld refinement analysis, while the oxygen content was determined by Mohr's salt permanganate titration. Morphology and porosity of prepared catalysts was correlated to catalytic oxidation of benzene, toluene, ethylbenzene and o-xylene. It was observed that both synthesis methods yielded catalysts of similar average pore size diameter and specific surface area, but the pore size distribution differed: CNA-prepared catalysts had a multimodal pore size distribution, while the coprecipitated ones had a single maximum at 4 nm. Catalysts prepared by the CNA method have shown a higher catalytic activity in the temperature range 373–723 K, as the presence of Mn³⁺/Mn⁴⁺ mixed valences increased their reducibility.     

Borcalein: a Carborane-Based Analogue of Baicalein with 12-Lipoxygenase-Independent Toxicity

12-Lipoxygenase is crucial for tumour angiogenesis. 5,6,7-Trihydroxy-2-phenyl-4H-1-benzopyran-4-one (baicalein) is a suitable inhibitor for this enzyme but is rapidly metabolised in vivo. Thus, an improvement of the metabolic stability is necessary to enhance the therapeutic efficiency. An emerging approach to enhance metabolic stability of carbon-based pharmaceuticals is the use of metabolically stable, non-toxic boron clusters, such as dicarba-closo-dodecaborane(12)s (carboranes) as phenyl mimetics. Therefore, the unsubstituted phenyl ring of baicalein was replaced by meta-carborane, resulting in borcalein, the carborane analogue of baicalein. This substitution resulted in a decreased inhibitory activity toward 12-lipoxygenase, but led to increased toxicity in melanoma (A375, B16, B16F10) and colon cancer cell lines (SW480, HCT116, CT26CL25) with decreased tumour selectivity in comparison to baicalein. Surprisingly, borcalein displays a different mechanism of cytotoxicity with increased intracellular production of reactive oxygen species (ROS), reactive nitrogen species (RNS) and nitric oxide (NO).